Re: K3S to be discontinued


Christopher Scibelli
 

Do you feel it was worth the cost?

Chris


-----Original Message-----
From: Mel Marcus <melm@...>
To: Elecraft-K3 <Elecraft-K3@groups.io>
Sent: Sat, Nov 2, 2019 9:00 pm
Subject: Re: [Elecraft-K3] K3S to be discontinued

Merv

You are correct. I upgraded everything except the two synthesizers and it did cost me 1200. I did the suggested updates pluse the k3iob

Mel
NE9A
-------- Original Message --------
Subject: Re: [Elecraft-K3] K3S to be discontinued
From: "Merv Schweigert" <merv.k9fd@...>
Date: Sat, November 02, 2019 7:18 pm
To: Elecraft-K3@groups.io

If you have had none of the updates done since #2340,  kiss more than 1000 bucks good bye.
Lots of boards and updates to be done if you want it close to a K3S.
Merv K9FD

I have a K3, Serial # is about 2340, and it needs to be repaired.  I'm getting the "12V Error" which Elecraft told me is due to not having gold contacts in the PA section of the rig. I can only get 12 watts of output, but for about a year this was intermittent.  Now, RF power never reverts to the nominal 100 watts. It's always 12 watts.

I think they also said some of the front panel buttons needed to be replaced with gold panel contacts as well, but this conversation was over 6 months ago and things were delayed due to medical issues.

I was told I'd be responsible for about 2 hours of lab time which I can afford.  However, I, too, was going to have upgrades done so my K3 is as close to a K3S as possible.

What mods did you have done to your K3 and what was the total bill?  I have a fully loaded K3 aside from the 2nd receiver.  5 INRAD filters, the ATU, voice recorder, general coverage receiver, and all other options aside from the 2nd receiver which from my 10 years with the rig is something I've decided I can do without.

I do need this repaired so I feel I may as well have some K3S mods done while Elecraft has my rig.  

Very 73,

Chris  NU1O

Join Elecraft-K3@groups.io to automatically receive all group messages.