Re: K3s, N1MM+, Logger32 and FT8 settings.

Wondering if the K3  rts-dtr menu item  is set to match what N1MM configurer shows?

NS2N  Paul

From: <> on behalf of Joe Subich, W4TV <lists@...>
Sent: Saturday, September 8, 2018 10:35:14 AM
Subject: Re: [Elecraft-K3] K3s, N1MM+, Logger32 and FT8 settings.

Treat the K3S as if it is a K3.  Use the Elecraft supplied E980297
cable to convert the RJ-45 jack to a DE9 (RS-232) connection.  Then
configure all of your other hardware ans software *exactly* like
it was with the K3.

Settings/configuration of the K3(s) for use with the E980297 cable
are shown on page 19 of the K3S Owners Manual.


    ... Joe, W4TV

On 2018-09-08 8:29 AM, KE1F Lou wrote:
> I used to have a fine functional K Line station. Everything worked fine, even my SteppIr followed my K3.
> I learned from past experience, "never to upgrade" unless you are forced to.
> I didn't follow my own advice and upgraded my K3 to K3s.
> After days of hard work, finally N1MM+ is displaying the radio's frquency.
> I have not been able to control the K3 to send cw or rtty.
> I hope there is someone, smarter than me figured out the settings and willing to share it. Being 81 years old, time is a valued commadity to me and I would like to get back on the air as soon as possible.
> Forgive me for my rants.
> 73 Lou  KE1F

Join to automatically receive all group messages.