Re: No USB Audio Codec


Mal
 

Make sure you have mic gain. The first time I switched to data A the mic gain was set to 0.

 

Mal

 

From: Elecraft-K3@groups.io <Elecraft-K3@groups.io> On Behalf Of Bill Maddock via Groups.Io
Sent: Thursday, August 30, 2018 6:57 AM
To: Elecraft-K3@groups.io
Subject: Re: [Elecraft-K3] No USB Audio Codec

 

Make sure you have USB turned on instead of a baud rate in menu

 

On Wed, Aug 29, 2018 at 8:31 PM, Brian

<brian@...> wrote:

In trying to set up FT8 I cannot set the Speakers to  USB codec. The USB codec is not displayed. I have the Mic set to LInE In on the K3s.

The Microphone input works fine with USB codec selected and signals are received.

Are there settings I could have wrong or is there a problem with the IO board.

Thanks

Brian KF6C.

Join Elecraft-K3@groups.io to automatically receive all group messages.