Re: [Elecraft] Hi SWR on 40mtrs


Don Wilhelm
 

Bill,

Check to see which antenna is selected. Having the K3 set for ANT2 while the antenna is set for ANT1 will cause that behavior.

73,
Don W3FPR

On 12/26/2016 5:23 PM, Bill Ellis via Elecraft wrote:
Hi all,
My K3 has been operating quite well until yesterday. I went to tune-up om 40 mtrs and the autotuner registered 25:1. On all other bands, it tunes properly. I then put my analyzer on the coax in the shack and it read 2.1:1. Should not be a problem for the autotuner. From what I'm seeing, the problem appears to be with the K3. What am I missing here?
Thanks for any help.

Join Elecraft-K3@groups.io to automatically receive all group messages.