Re: [Elecraft_K3] Re: K3 no sub receiver on SSB
Carl Moreschi
While in CW mode on the sub and hearing audio, change the filter setting on the sub to a wide SSB filter. If the audio goes away you know it's a filter setting problem.
Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com
toggle quoted message
Show quoted text
Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com
On 1/8/2016 3:52 PM, 'OZ0J Joe' contest@... [Elecraft_K3] wrote:
Hi Mike
I have tried that without success.
The filter settings can you see at
https://dl.dropboxusercontent.com/u/2651703/k3%20filters.pdf
73 Joe OZ0J
*Fra:*Elecraft_K3@... [mailto:Elecraft_K3@...]
*Sendt:* 8. januar 2016 21:11
*Til:* Elecraft_K3@...
*Emne:* [Elecraft_K3] Re: K3 no sub receiver on SSB
Hi Joe,
Turn on the SUB RX and make sure it says MAIN for the antenna.
Tune in a CW station on Main RX
Press A-B (#3 button) twice.
You should hear the CW station on the SUB and the strength should be
exactly the same as the Main.
Now tune in a SSB station on VFO A
Press A-B twice
You should hear the SSB station on the SUB and it should be exactly the
same strength as the Main.
If this does not work then I think something is not correct with your
crystal configuration for the SUB RX.
73,
Mike K2MK