Re: [Elecraft_K3] Firmware updating


Rudolf Schaffer
 

Ok David !
Have a nice week-end,
Rudi

Le 02.10.2015 18:39, 'David G3YYD' g3yyd@... [Elecraft_K3] a écrit :
 

Everything that the utility says to do

 

From: Elecraft_K3@... [mailto:Elecraft_K3@...]
Sent: 02 October 2015 14:57
To: Elecraft_K3@...
Subject: Re: [Elecraft_K3] Firmware updating

 



David, after installing the K3 utility and copying the latest versions from Elecraft site, i've just a last question:
Can i update all FW or are some updates only compatible with K3 hardware modifications ?
Thank you very much for your help.
73 QRO,
Rudi, HB9ARI

Le 02.10.2015 16:15, 'David G3YYD' g3yyd@... [Elecraft_K3] a écrit :

 

Got to here: http://www.elecraft.com/K3/k3_software.htm

Download K3 utility first & install, configure for K3 serial port then use it to download firmware and then load it into K3.

73 David G3YYD

-----Original Message-----
From: Elecraft_K3@... [mailto:Elecraft_K3@...]
Sent: 02 October 2015 13:31
To: Elecraft_K3@...
Subject: [Elecraft_K3] Firmware updating

Hello,

I've an "old" K3 (#1212) and also an old FW:

dr 00.00
d1 02.49
d2 00.00
FL 01.06
uC 03.68

No hardware modifications were done.
To use a particular SW, i need the SMH command and i've only the SM recognized with the current FW status.

What procedure should i follow to update until SMH command active ?

Thank you for your help.

73 QRO,
Rudi, HB9ARI

------------------------------------
Posted by: Rudolf Schaffer
------------------------------------

------------------------------------

Yahoo Groups Links






Join Elecraft-K3@groups.io to automatically receive all group messages.