Re: [Elecraft_K3] Firmware updating


David G3YYD <g3yyd@...>
 

Got to here: http://www.elecraft.com/K3/k3_software.htm

Download K3 utility first & install, configure for K3 serial port then use it to download firmware and then load it into K3.

73 David G3YYD

-----Original Message-----
From: Elecraft_K3@... [mailto:Elecraft_K3@...]
Sent: 02 October 2015 13:31
To: Elecraft_K3@...
Subject: [Elecraft_K3] Firmware updating

Hello,

I've an "old" K3 (#1212) and also an old FW:

dr 00.00
d1 02.49
d2 00.00
FL 01.06
uC 03.68

No hardware modifications were done.
To use a particular SW, i need the SMH command and i've only the SM recognized with the current FW status.

What procedure should i follow to update until SMH command active ?

Thank you for your help.

73 QRO,
Rudi, HB9ARI




------------------------------------
Posted by: Rudolf Schaffer <rudolf.schaffer@...>
------------------------------------


------------------------------------

Yahoo Groups Links

Join Elecraft-K3@groups.io to automatically receive all group messages.