1. posterid:418456
  2. [Elecraft_K3] K3 and KSYN3A

Re: [Elecraft_K3] K3 and KSYN3A

David McClain
 

That was an impressive demo video. So I ran my own tests last night on my newly updated K3 with the new synth modules installed, and also on my recently updated IC-7700.

Where that demo video gave an indication under really extreme conditions of S9+70 dB, which might be encountered in multi-radio contesting conditions, I ran my tests on a more common situation with an S0-S1 CW signal against a continuous carrier interferer level of S9+20 dB. I also used the more common bandwidth of 400 Hz.

Under these conditions, I found that I could hear the signal of interest at a separation of 300 Hz. In other words, as soon as the interferer fell outside the bandpass filter. AGC was not unduly suppressing the signal of interest.

The same results were found for both of my radios.

73 de Dave, N7AIG


On May 28, 2015, at 02:03 AM, dalej dj2001x@... [Elecraft_K3] <Elecraft_K3@...> wrote:

There is the video of the 7800 v. 7851, impressive difference, but where's the K3 video?

I ain't buying no $15000 rig!!  My K3/P3 will still outperform it.

Dale,k9vuj


On 27, May 2015, at 14:46, bozidar nikolic bozidarms@... [Elecraft_K3] <Elecraft_K3@...> wrote:

[Attachment(s) from bozidar nikolic bozidarms@... [Elecraft_K3] included below] 

Hi again,

this time i will show you P3 schreenshot as proof of incredible strong signal handling of  K3 with new KSYN3A board:
P3 freq. span is 5 kHz,
red band is signal 59+60dB, centered on 7.134 MHz,
K3 is on SSB mode, filter BW2.4kHz center weighted (normalized - green band) -  on 7.134 MHz,
in filter BW is SSB signal clearly and laud herd.

This all, remind me on video from IC7851 vs IC7800 RMDR characteristics, with strong signal and week one ,300 Hz offset

Icom IC-7851 vs IC-7800 RMDR Characteristics








Icom IC-7851 vs IC-7800 RMDR Characteristics
Auf www.youtube.com anzeigen
Vorschau nach Yahoo

Enjoy,
S50BN







------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
   http://groups.yahoo.com/group/Elecraft_K3/

<*> Your email settings:
   Individual Email | Traditional

<*> To change settings online go to:
   http://groups.yahoo.com/group/Elecraft_K3/join
   (Yahoo! ID required)

<*> To change settings via email:
   Elecraft_K3-digest@... 
   Elecraft_K3-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
   Elecraft_K3-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
   https://info.yahoo.com/legal/us/yahoo/utos/terms/

73 de Dave, N7AIG

David McClain
Join {Elecraft-K3@groups.io to automatically receive all group messages.