The FDM-DUO is supplied with a USB memory stick which contains the SDR software and user manual. Can this all be downloaded from the Elad website for free? Or does the memory stick contain an activati

I have checked out the QST review for the FDM-DUO and the FM sensitivity for 12dB SINAD on 29 and 50 MHz is 1.26uV (-105dBm) and 1.62uV (-103dBm). This suggests that the FDM-DUO is around 15-17dB deaf

Does the FDM DUO have a switchable RX pre-amp? The User Manual (page 13 Rev 2.6) shows an LCD display with all the display option shown. In the top left hand corner there are 3 options shown: LP ATT P

Just stirring the pot again to see if there is any new information re Downconverter future availability timeline. Has a source been found for the TCA9535RTWR chips?

Hi Guys! Sent my Elad FDM-DUO in for repair. Mailed my unit to the Ridgeville, SC transfer point to Italy on 3/18/2022. It took awhile to get to Italy, but it was eventually repaired and shipped on 6/

*Decided to NOT sell, in case anyone was really looking.....* They are in perfect, like new state, with a case and filtered USB cable included. You can get your own ELAD, HDSDR or SDR Console software

Unless I misunderstood, Elad would begin work to make a dll for use with the HDSDR software. It would be nice if you could indicate when it might be available. -- Bjarne Mjelde arcticdx.blogspot.com R

I had a dream last night that I was walking around while doing a park on the air activation. I used my radio to activate different parks over the course of several months. It was an awesome experience

I just purchased a Elad FDM DUO and I'm sure will be checking out more power in the near future. Is the Duo ART the best way to go? If so, why? If not, what are my options?

I just ordered an Iambic paddle. Of course it's been a long time coming here and now I'm worried that it may not work with the duo? NEW CJ11 Mini CW Key Automatic Key Magnetic Suction HAM Communicatio

DUO-Art 120 FDM-Duo (Blk) Speaker SP-1 TM2 USB Tuning Sys - TMATE Asking $2350 Prefer local pick-up Pittsburgh area. Will ship CONUS. Also have a Elecraft K1 (40/30), loaded K-3 and KPA500 for sale. P

I see in another post someone using ver 3.55 and I am using ver 3.53. On the elad website download page the latest version is 3.5.2 What is the current version? Kind Regards, Dennis W7DRW

Hi everyone, Would like to submit problem here. I have received all aviation with the Elad FDM-S3, which is in the range between 53 to 69 MHz. At first I thought it was possible, but because there was

HI, The file ExtIOmc_ELAD_FDMDUO.dll from the ELAD website does not seem to work with HDSDR, SDRSharp and SDRUno (EXTIO version). Need to rename the file as ExtIO_mc_ELAD-FDMDUO.dll in order to select

The "Exploit" is titled "Follina" and @Microsoft "CVE-2022-30190". See the Web for more information. Klaus, DK3QN

Ive searched through all the setup xml files and i dont have UnlockDUOr/t im running version 3.52 of fdm-sw2 and have the bandpass filter in slot 1?

Is there a ready-made cable that allows me to connect a Heil Proset Elite HC-6 to an FDM-Duo? Most of the time I will probably use the FDM-SW2 and use audio from the PC, but I always need a PTT input

I don't know if i can..but i will able to make this contribution for the group....I have the "little program" to extend in emission the Elad duo on all frequency !! From 1 to 30 Mhz, and 50 Mhz too...

Installed latest version Version 3.52 followed instructions and first installed visual studio and net frame 4. At first, the program comes up and identifies the receiver, I click on the receiver and o

If you can see a thumbnail of the main window by placing your mouse pointer on the SW2 Taskbar icon, it is likly a case of window hiding beyond the confines of your display. In this case, you can get