Hello group My name is Danila, I am a Russian from Krasnodar. This is my first post in this group. I have been using this wonderful SDR for more than a year and I have never had any comments or proble

Hi, One thing that I miss in the SW2 is the possibility to set the FFT Resolution. Or have I overlooked this possibility for years? Regards Fernando

Thank you Elad italy for the fast delivery of the Filters. :-) Regards Fernando

I'm trying to listen to a station on 25M transmitting in DRM (Radio Nacional da Amazonia on 11910 kHz). I can see the text messages from the station in the DRM info pop-up, but don't hear any audio. T

Has anyone had experience of this please. Power up on 40m. Inject a signal into either ant port at a level of -73dbm S9. S meter reads S7 -80dbm or sometimes S6. After a short time S meter drops to S2

Has anyone experience with this problem please. I feed a S9 -73dbm signal into either ant port on the FDM-DUO and the S meter on the Duo and FDM software reads from S6 to S7. The level changes after a

Hi, can Vianney or anyone at Elad give me some idea when an S3 Extio dll might be available please? Thanks Mike

I have a peculiar problem. FDM-SW2 is set to have four active receivers. When switching between them, by either clicking on the waterfall coloured vertical band or on the roght hand menu coloured butt

Dear friends Today I read in the receiver test data at sherwood engineering: http://www.sherweng.com/table.html the measurements about dynamic range is very low (70db) insteed of QST review @ May 2016

I hooked up my Hardrock 50 amplifier (DUO RTX/TX PL-259 connection to HR RF IN and DUO PTT to HR50 PTT) but I get a "DEMOD Error" when I press PTT or tap my cw key. Does anyone have success in connect

Hello, I got a corrupted IQ file due to a power-off situation with my S3. That meant that the last IQ file in a series was left with an empty header. It was easy to get the file "back" by copying the

Is there an easy way to connect SW2 to the FDM DUO via my home wifi so I can operate the SW2 while sitting in front of a different computer in a different room than operating from the pc in my ham sha

Reading some interest regarding the various tests by experienced ( ! ) facilities on FDM recivers........ I have purchased probably over 20+ various makers of receiver models for the last 50 years inc

As the subject suggests, my duo has started randomly decrementing its frequency in whatever steps the dial is set for. There does not seem to be any consistency to it and might be 10 minutes or so bet

Hello ELAD fans It's now a New Year Thus I wonder about The appearance of the FDM-DX transceiver Stay-Safe, Jan K1ND

Evening all, Trying to run SW2 on a spare laptop and I am getting an error: ************** Exception Text ************** System.IO.FileNotFoundException: Could not load file or assembly 'BasicIFDLib.d

Received my S3 several days ago and it has been working fine. Until now!! Was using SW2 3.046 software and happened to click on Set, then Advanced, and clicked on Enable Downconverter. (I dont yet hav

Good morning and happy new year. From this link: http://www.eladit.net/download/sdr/FDM-sw2%20Software/Auxiliary%20software/SW2SMeter%20Plugin%20by%20IK4IRO/index.php?lang=IT you can download the new

Hallo all, With the FDM-S3 I use two antennas. One for shortwave connected to HF 1. One for VHF connected to VHF. When I listen to shortwave HF 1 is used automatically. I can change to HF 2 and back.

Hello and HPNY to all. My GO button is grayed on program start. Everything is connected. Any ideas? Thanks in advance. Guillermo - HK4KM