My S3 has had a temporary reception problem for quite some time. Sometimes to often it happens that only stronger signals can be received. The noise floor sinks far down. I've checked all antenna conn

hello everyone I don't understand why the FDMDUO works well with WSPR / FT8 / rtty / mode but not with OPERA / VARA / ROS??? . the reception is ok via audio v1.04 not the TX I tested vb-audio-virtuel

Evening All Just taken delivery of an FDM-S2 which is about 80Hz high at 10MHz. The manual is less than helpful about correcting this kind of error which does matter when you’re listening to STANAG428

Hello! Can anyone tell me what the sensitivity of the FMD-S3 with a downconverter is above 110MHz? I connected three receivers with the splitter: FDM-S3, R&S EB200 and RTL-SDR. I found that R&S EB200

I might be missing something obvious or the functionality I'm envisioning simply isn't available. I have 3 instances of WSJT-X each pointed to a different VRX: WSJT-X Instance #1 - VRX1 WSJT-X Instanc

Wanted (UK) Looking for an Elad FDM Duo in good condition, preferably with all the supplied cables and accessories. I'm in UK so prefer a UK sale to avoid any customs/rip off courier handling charges

As of now, I have been unable to find a way to reduce the dB range setting on the spectrum scope. As-is, it is 0dBm to -140dBm. Something like -140dBm to -50dBm daytime, or perhaps -120dBm to -50dBm n

Hello group, A friend of mine has bought a new Elad about three yours ago, because he saw mine working in my shack. For a year or so ago the blue led went on and off during the time he used the Elad F

I mostly use my G33DDC radios and have decided to sell my 2 ELAD S2 radios and go in a different direction with any new purchases. I would like $250 for each. Includes double filter USB cable and SMA

Hi, I ran into this problem after a new install of SW2; the software was running properly (I could see it in task manager) but was invisible. After googling, I couldn't find a simple fix so I created

Hello to everyone. I have been out of the radio monitoring game for over 5 years. I would like to start listening again. My SDR is the FDM-S2. From the collective experience, would the latest Elad sof

Hi Everybody, I should have my red transceiver this Friday and am looking forward to it. Having owned a KX3 and KX2, one of my concerns would be heat buildup while operating the digital modes or SSB a

Hello Are there any specific cw settings in the Elad Duo? this mode seems a little “choppy” and is difficult to send the C in my call - wants to omit the last dah and dit - sends as a k about half the

Hi board I've got new monitor 32" and i see carachters of right menu small like ant's. There is a way to increse it ? (like to change something with regedit)

Hi everyone, Using SW2 v3.55 I find if VRX1 is set to a particular freq and VRX2 is set to another freq, save your profile & reload the same profile,VRX1 is set to the correct freq but VRX2 = VRX1 fre

Hi all , here’s a chance to buy my little used FDM-S2 very good condition boxed . UK sale only £220 OVNO See Elad website for detail I will pay for post and package. Regards John

Hi All, I just got my test s3 with Downconverter about an hour ago, got it setup and did a quick test up on 850mhz, antenna not tuned right yet But I’m seeing trunking systems about 30miles away… now

Hey All USA & Canada Customers, I'm still have phone coverage issues, if you need sales or support you can try the old/current number 312.320.8160, if you don't get An answer and it goes to voicemail,

I just finished build 4 more LZ1AQ loop amplifier boards. They work great with a 3' to 4' diameter loops. I will not ship out of the US. If interested in info and price please contact me off list at e

I am trying to integrate N1MM's spectrum window and was wondering if someone can point me to a correct/working Extio file. 73 de NE7EE Christoph