I can not figure out how to expend the waterfall so I can see 88 to 108MHz on the FM band. I am able to do it with SDR Console, but not with SW2. Ant help would be greatly appreciated. Everett N4CY

My ELAD-S3 has been working fine, however awhile ago it quite working on SDR Console. I also tried it on SW2 and it would not work there either. I have a second S3 and I tried it also and it did not w

I have not logged into the USA site since I bought my S2 many years back. I don't recall the password. I click the "forgot password" link and it sends a temporary password and instructs me to use it t

Weird one here. Listening to my S3 with V3.55 and all is well. Shut it down and opened it twice today and its working like a charm. A separate problem is my wireless mouse is erratic. It was suggested

Hello all. I have used my FDM-DUO/ART120 stand-alone for a long while, and I have used FDM-SW2 for receiving. I want to also transmit through it. I am using a USB microphone, and it shows up in Window

My S2 radio works fine on a few year old desktop and a 2nd gen I7 Toshiba laptop. However, the S2 is not happy with a new HP Envy 13 laptop. The audio continuously crackles when I start the radio abov

Looking at buying one of these but info is sparse on them what im trying to figure out can you share say ant1 with 2 radios and ant2 with another, from what ive seen you can only share 1 ant to 1 radi

Anyone know if it's possible to connect the clocks (and anything else that might be needed?) between 2 SW2's to allow true diversity reception? I think the software can handle multiple units. Any docs

Hi All, I've just released version 1.83 of EladRemote here: https://www.eladit.com/en/download?path=sdr%2FDUO-ART_EladRemote%2F1.83 New features are: - Better management of cw "break-in" timings - Out

FDM-SW2 VERSION 3.55 on the radio: Menu 33 TXOUT 0dBm Menu 2 RX LP OFF FDMSW2SwSetup.xml: <LockFreqDUOt value="0" /> In SW2, the LPF checkbox is off.

RX1, RX3, and RX4 are okay. 3.55 reloaded. Computer rebooted. FDM-S3 turned off for a bit and then back on. In RX2, where the main window works as it should, selecting "IF" results in the flash appear

This command comes in handy every now and then. In a way, it is so important that it could be highlited at the top of this Quick Start Guide. Another case of window not showing up has happeded me some

I just saw this referenced in another thread here. Then I searched for the topic and saw it referenced again in a second thread. What exactly is “Perseus22”?

I have decided to sell my ELAD and RM Italy HLA 305 200-watt linear amp. Both works great. I am going in a different direction in amateur radio. If interested, you can contact me using my email listed

What was the original mic that came with the ELAD? I have always used an ICOM desk mic and never used a hand mic with the ELAD. I was just wondering what came with the ELAD. Thanks, Jack, K4JVF

Hello Elad, I use my FDM DUO with SW2 remotely, via Splashtop remote desktop. For remote use, SWR, Power, and ALC is missing from the SW2 software. In order to view this important information, I have

Hi all, My FDM-DUO is only outputting a maximum of around 3-4 watts on the 10m band (around 28.490ish). Lower bands are producing in excess of 5 watts, and seem to work as expected. (TX Power Setting

3 days ago I received a new FMD-S3, which I have up and running. Looking at the antenna input connections on the back I see a HF 1, HF 2 (Bias Tee) and VHF 2 (Bias TEE). So my question is since I see

I apologise if this has been covered, but I could not find it. This week I swapped my Icom 7300 for the FDM Duo and changed the settings in Omnirig from the Icom to SW2, correct baud and CAT port. All

I just installed Windows 11, as an upgrade from Windows 10. My S3 is running version 3.55 of the SW2 software. I am pleased that everything seems to work as it did before. Nonetheless, are there any s