I just saw this referenced in another thread here. Then I searched for the topic and saw it referenced again in a second thread. What exactly is “Perseus22”?

I have decided to sell my ELAD and RM Italy HLA 305 200-watt linear amp. Both works great. I am going in a different direction in amateur radio. If interested, you can contact me using my email listed

What was the original mic that came with the ELAD? I have always used an ICOM desk mic and never used a hand mic with the ELAD. I was just wondering what came with the ELAD. Thanks, Jack, K4JVF

Hello Elad, I use my FDM DUO with SW2 remotely, via Splashtop remote desktop. For remote use, SWR, Power, and ALC is missing from the SW2 software. In order to view this important information, I have

Hi all, My FDM-DUO is only outputting a maximum of around 3-4 watts on the 10m band (around 28.490ish). Lower bands are producing in excess of 5 watts, and seem to work as expected. (TX Power Setting

3 days ago I received a new FMD-S3, which I have up and running. Looking at the antenna input connections on the back I see a HF 1, HF 2 (Bias Tee) and VHF 2 (Bias TEE). So my question is since I see

I apologise if this has been covered, but I could not find it. This week I swapped my Icom 7300 for the FDM Duo and changed the settings in Omnirig from the Icom to SW2, correct baud and CAT port. All

I just installed Windows 11, as an upgrade from Windows 10. My S3 is running version 3.55 of the SW2 software. I am pleased that everything seems to work as it did before. Nonetheless, are there any s

I recently migrated all my software from a dying dekstop to a Mini IT 11 computer (Windows 11 Pro). I have Log4OM V2, WSJT-X, JTAlert, SW2 and VSPE fully integrated and working well together. My quest

Elad FDM-SW2 with CW Skimmer Multidecoder. https://youtu.be/KdHSbhLHruA 73 Fernando

Hello all, I have a DUO-ART 120 since approx a year. I wonder if the power-up sequence of the FDM-DUO when taking the power from the DUO-ART is correct. My DUO-ART always power-up the FDM-DUO like thi

Near Mint, no issues, works well. Original boxes and accessories. <3 Years old. Geoff

Hardware FDM-DUO with 120W DUO-ART amp. New Computer - Windows 11 Pro I am moving my existing set-up to a new computer. When I do this can I just plug in my existing cables into the new computer, as t

My unit was working fine until I over current Astron P/S with solid state amp connected to DUO it rebooted on its own while in transmit software quit responding. Radio is showing DUO RX/TX on display

As I noted in an earlier post, I returned my Elad FDM-DUO to Elad several months ago for a USB port repair. It took them weeks to received the unit after shipping it to their US location for shipment

Hi, On the Elad S3 the widest bandwidths available are 24.576 and 12.288 MHz. Is there any way I can get a 15 or 16 MHz bandwidth? Thanks, Larry

I prefer the SW2 interface but for an upcoming DXpedition I plan to use SDR-Console for WBFM to record Meteor Scatter as it has a built in database that will capture RDS data. When recording SDR-Conso

Hello, everyone, yesterday my FDMduo suddenly stopped receiving while i am working digimode FT8. My guess is that it was static electricity from the antenna. (It rains and eg 100km away was a thunders

When controlling one of the Virtual radios via the CAT control by FLdigi or VarAC asking for a frequency change and you have another receiver selected, the selected receiver will change mode to match

Hi all! Can anyone share the OrbitronFDMSW2.exe utility? The download link is not active. Or is there another way to automatically correct the Doppler effect in SW2? I will be glad to anyone! informat