S3 With Downconverter option
Hi All,
I just got my test s3 with Downconverter about an hour ago, got it setup and did a quick test up on 850mhz, antenna not tuned right yet
But I’m seeing trunking systems about 30miles away… now back to more testing, yes its real….
Have a Radiolutionary Day!
Paul
--
Paul Jones - Elad USA Sales & Technical Support (USA)
FDM-Duo, Duo-Art, FDM-DUOR, FDM-S3, FDM-S2, FDM-S2, FDM-SW2, T-Mate
Visit http://www.eladit.com for the full range of Elad Products or USA Sales : https://shop.elad-usa.com/
Email Support Group - https://groups.io/g/EladSDR
Sales Phone: 312.320.8160
Support Email: support@... Sales Email: sales@...
Personal Email: Paul@...
From: Hans-Juergen Karius <h.j.karius@...>
Reply-To: <EladSDR@groups.io>
To: <EladSDR@groups.io>
Sent: 15.08.2021 14:19:22
Subject: Re: [EladSDR] S3 With Downconverter option
________________________________________________________________________________
Hallo all,
After all the 'desperate' questions about the S3 downconverter's
appearance no reaction to Paul's info?
73
Hans, DL4YBP
Promises a long, very long, time resets interest and take the upper hand in disbelief for anything.
----- Original Message -----
From: Hans-Juergen Karius <h.j.karius@...>
Reply-To: <EladSDR@groups.io>
To: <EladSDR@groups.io>
Sent: 15.08.2021 14:19:22
Subject: Re: [EladSDR] S3 With Downconverter option
Hallo all,
After all the 'desperate' questions about the S3 downconverter's
appearance no reaction to Paul's info?
73
Hans, DL4YBP
This is great news!
For me personally, it is the capabilities above 54 MHz with a downconverter that is the raison d'etre for the S3.
Many of us here can play around with evaluation board mixers on the kitchen table, but very few of us can make products. :-)
I keep my fingers crossed for a successful launch of the downconverters and not just in one frequency range for that matter!
Best regards,
Anders H.
SM6-8439
the S3 User Manual has been updated with a few information about the Downconverter frequency coverage. Another important news is that to install the Downconverter inside the S3, the self install option will be not more suggested, we will propose facilitated solution to who already own the S3 and wanted to add it the Downconverter to ship the S3 to our facilities and will be mounted for free option. Only shipment to ELAD will be at customer charge.
Regards,
Vianney
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
Vianney,
To me, recommending that the Downconverter be installed at your facilities indicates that there could be a problem with self installation. Apparently the problem is serious enough to remove the self install instructions in the revised manual. How serious is the problem? Is there the possibility of damage to the S3? Could you elaborate on what the problem is?
Would my S3 have to be shipped all the way to ELAD facilities in Italy for the upgrade?
I'm not getting a good feeling about this.
In a message dated 11/11/2022 8:16:49 AM Central Standard Time, p.briggs@... writes:
Vianney,
To me, recommending that the Downconverter be installed at your facilities indicates that there could be a problem with self installation. Apparently the problem is serious enough to remove the self install instructions in the revised manual. How serious is the problem? Is there the possibility of damage to the S3? Could you elaborate on what the problem is?
Would my S3 have to be shipped all the way to ELAD facilities in Italy for the upgrade?
I'm not getting a good feeling about this.
One more question:
The maximum input frequency range for the S3 with downconverter is given in the manual, but not the supported band segments on VHF and UHF. The installation manual looked promising but specific bands are not elaborated upon. Perhaps ELAD will offer specific options since the user install option is no longer deemed feasible? An advantage with factory install would be that an overall system price for an S3 with a very specific VHF or UHF band capability might be available from ELAD eventually.
Best regards
Anders H.
SM6-8439
Self install instructions are not in the user manual and are still present here. Apart the issues few customers have had installing downconverters (wrong screws, inverted wires, little tightness), the complete frequency coverage will require another little piece of hardware connected to the downconverter which is harder to install. We just wanted to warn customers of this additional installation difficulty and avoid unpleasant repairs for all. We will update the self install instructions when possible so it will be clearer for everyone.
Regards,
Vianney
Vianney,
To me, recommending that the Downconverter be installed at your facilities indicates that there could be a problem with self installation. Apparently the problem is serious enough to remove the self install instructions in the revised manual. How serious is the problem? Is there the possibility of damage to the S3? Could you elaborate on what the problem is?
Would my S3 have to be shipped all the way to ELAD facilities in Italy for the upgrade?
I'm not getting a good feeling about this.
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
The frequency range with the downconverter is 108MHz to 4.25GHz, without interruptions.
Regards,
Vianney
Hello,
One more question:
The maximum input frequency range for the S3 with downconverter is given in the manual, but not the supported band segments on VHF and UHF. The installation manual looked promising but specific bands are not elaborated upon. Perhaps ELAD will offer specific options since the user install option is no longer deemed feasible? An advantage with factory install would be that an overall system price for an S3 with a very specific VHF or UHF band capability might be available from ELAD eventually.
Best regards
Anders H.
SM6-8439
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
You are third on my list but I know that one downconverter freed, so probably second now.
Regards,
Vianney
I find it sad,
again 2 months have passed and no information about the availability of the
DownConverter, please dear people from ELAD, when can we expect it.Greetings Uwe
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
I have asked for some basic performance figures, up to now I have seen nothing.
73
Conrad PA5Y
Sent: 12 January 2023 12:58
To: EladSDR@groups.io
Subject: Re: [EladSDR] S3 With Downconverter option
You are third on my list but I know that one downconverter freed, so probably second now.
Regards,
Vianney
Il 12/01/2023 11:43, Uwe S. ha scritto:
I find it sad,
again 2 months have passed and no information about the availability of the
DownConverter, please dear people from ELAD, when can we expect it.
Greetings Uwe
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad
eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message
from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
Thank you very much.
On Thu, Jan 12, 2023 at 12:58 PM, Vianney Colombat wrote:
You are third on my list but I know that one downconverter freed, so probably second now.
Regards,
Vianney
----- Original Message -----From: Uwe S. <uwe57er@...>Reply-To: <EladSDR@groups.io>To: <EladSDR@groups.io>Sent: 13.01.2023 07:15:17Subject: Re: [EladSDR] S3 With Downconverter option
Hallo Vianney
Thank you very much.Greetings Uwe
On Thu, Jan 12, 2023 at 12:58 PM, Vianney Colombat wrote:
You are third on my list but I know that one downconverter freed, so probably second now.
Regards,
Vianney
Hello,
we do not have this answer actually. Due to the difficulty to retrieve electronic components at a decent price, for now we produce the downconverter in batches of 10-15 pieces.
Regards,
Vianney
Hi!First, second, third... these are the details.The main question iswhen ELAD will make enough Downconverters for all those who bought the FDM-S3 for non-FM radio listening purposes.Beautiful promises have been believed, funds have been issued,but the FDM-S3 is lying in a box in the garage as an unnecessary thing.----- Original Message -----From: Uwe S. <uwe57er@...>Reply-To: <EladSDR@groups.io>To: <EladSDR@groups.io>Sent: 13.01.2023 07:15:17Subject: Re: [EladSDR] S3 With Downconverter option
Hallo Vianney
Thank you very much.Greetings Uwe
On Thu, Jan 12, 2023 at 12:58 PM, Vianney Colombat wrote:
You are third on my list but I know that one downconverter freed, so probably second now.
Regards,
Vianney
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.