|
Everett N4CY
I can not figure out how to expend the waterfall so I can see 88 to 108MHz on the FM band. I am able to do it with SDR Console, but not with SW2.
Ant help would be greatly appreciated.
Everett N4CY
|
|
|
Settings - Graphics, then check "full BW Spectrum" box.
On 04/12/2022 19:07, Everett N4CY via
groups.io wrote:
toggle quoted message
Show quoted text
I can not figure out
how to expend the waterfall so I can see 88 to 108MHz on
the FM band. I am able to do it with SDR Console, but not
with SW2.
Ant help would be
greatly appreciated.
Everett N4CY
|
|
|
Everett N4CY
toggle quoted message
Show quoted text
On Dec 4, 2022, at 2:39 PM, g0ofe <forums@...> wrote:
Settings - Graphics, then check "full BW Spectrum" box.
On 04/12/2022 19:07, Everett N4CY via
groups.io wrote:
I can not figure out
how to expend the waterfall so I can see 88 to 108MHz on
the FM band. I am able to do it with SDR Console, but not
with SW2.
Ant help would be
greatly appreciated.
Everett N4CY
|
|
|
Everett N4CY
I thought that your instruction below would expand the waterfall, but it did not. When I check BW and Apply I get these messages.
Everett N4CY
In a message dated 12/4/2022 2:39:59 PM Central Standard Time, forums@... writes:
toggle quoted message
Show quoted text
Settings - Graphics, then check "full BW Spectrum" box.
On 04/12/2022 19:07, Everett N4CY via groups.io wrote:
I can not figure out how to expend the waterfall so I can see 88 to 108MHz on the FM band. I am able to do it with SDR Console, but not with SW2.
Ant help would be greatly appreciated.
Everett N4CY
|
|
|
Everett N4CY
If someone that has the SW-2 setup for full view of the FM band could please send me a screen shot of the Graphic setup window it would be of great help?
toggle quoted message
Show quoted text
On Dec 5, 2022, at 10:06 AM, Everett N4CY via groups.io <everettsharp@...> wrote:
I thought that your instruction below would expand the waterfall, but it did not. When I check BW and Apply I get these messages.
Everett N4CY
In a message dated 12/4/2022 2:39:59 PM Central Standard Time, forums@... writes:
Settings - Graphics, then check "full BW Spectrum" box.
On 04/12/2022 19:07, Everett N4CY via groups.io wrote:
I can not figure out how to expend the waterfall so I can see 88 to 108MHz on the FM band. I am able to do it with SDR Console, but not with SW2.
Ant help would be greatly appreciated.
Everett N4CY
 
|
|
|
Everett, can you send a screen shot and explain what you aren't seeing or what you are expecting to see. Maybe sharp eyes will see the issue.
Bill
|
|
|
Everett N4CY
Bill,
I can send some screen shots tomorrow. I have a ELAD S3, which has 24MHz of band width, what I want is to be able to see is all of the 88 to 108MHz FM band at once. I am able to do that of SDR Console.
toggle quoted message
Show quoted text
On Dec 5, 2022, at 3:49 PM, Bill Nollman <billct97@...> wrote:
Everett, can you send a screen shot and explain what you aren't seeing or what you are expecting to see. Maybe sharp eyes will see the issue.
Bill
|
|
|
Everett; 1. Settings / Graphics Tab / Full BW Spectrum (box should be checked). 2. Settings / Advanced Tab / Device Configuration (dropdown box) select 24MHz. 3. From the main SW2 interface, to the right of the frequency, if there are 3 magnifying glass icons - + X click the X to cancel the Zoom. If none of that helps please send a screen shot to show what’s happening. Bill
toggle quoted message
Show quoted text
From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Everett N4CY via groups.io Sent: Monday, December 5, 2022 5:04 PM To: EladSDR@groups.io Subject: Re: [EladSDR] #fdm-SW2 How to expand the FM band so I can see 88 to 108MHz #fdm-sw2 Bill, I can send some screen shots tomorrow. I have a ELAD S3, which has 24MHz of band width, what I want is to be able to see is all of the 88 to 108MHz FM band at once. I am able to do that of SDR Console. Everett
On Dec 5, 2022, at 3:49 PM, Bill Nollman <billct97@...> wrote:
Everett, can you send a screen shot and explain what you aren't seeing or what you are expecting to see. Maybe sharp eyes will see the issue.
Bill
|
|
|
Everett N4CY
Hi Bill,
I will work on it in the morning and let you know the out come..
toggle quoted message
Show quoted text
On Dec 5, 2022, at 7:37 PM, Bill Nollman <billct97@...> wrote:
Everett; 1. Settings / Graphics Tab / Full BW Spectrum (box should be checked). 2. Settings / Advanced Tab / Device Configuration (dropdown box) select 24MHz. 3. From the main SW2 interface, to the right of the frequency, if there are 3 magnifying glass icons - + X click the X to cancel the Zoom. If none of that helps please send a screen shot to show what’s happening. Bill From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Everett N4CY via groups.io
Sent: Monday, December 5, 2022 5:04 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] #fdm-SW2 How to expand the FM band so I can see 88 to 108MHz #fdm-sw2 Bill, I can send some screen shots tomorrow. I have a ELAD S3, which has 24MHz of band width, what I want is to be able to see is all of the 88 to 108MHz FM band at once. I am able to do that of SDR Console. Everett
On Dec 5, 2022, at 3:49 PM, Bill Nollman <billct97@...> wrote:
Everett, can you send a screen shot and explain what you aren't seeing or what you are expecting to see. Maybe sharp eyes will see the issue.
Bill
|
|
|
Everett N4CY
Hi Bill,
Step (2) fixed the problem and I can see all of the FM band.
Step (1) when I check "BW" then "Apply" I get this message.
Then when I click OK this window comes up.
Then if I go to another window and come back to the Graphic tab the "BW" is un-checked.
Below is what the screen look like now.
Everett N4CY
In a message dated 12/5/2022 7:37:10 PM Central Standard Time, billct97@... writes:
toggle quoted message
Show quoted text
Everett;
1. Settings / Graphics Tab / Full BW Spectrum (box should be checked).
2. Settings / Advanced Tab / Device Configuration (dropdown box) select 24MHz.
3. From the main SW2 interface, to the right of the frequency, if there are 3 magnifying glass icons - + X click the X to cancel the Zoom.
If none of that helps please send a screen shot to show what’s happening.
Bill
From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Everett N4CY via groups.io
Sent: Monday, December 5, 2022 5:04 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] #fdm-SW2 How to expand the FM band so I can see 88 to 108MHz #fdm-sw2
Bill,
I can send some screen shots tomorrow. I have a ELAD S3, which has 24MHz of band width, what I want is to be able to see is all of the 88 to 108MHz FM band at once. I am able to do that of SDR Console.
Everett
On Dec 5, 2022, at 3:49 PM, Bill Nollman <billct97@...> wrote:
Everett, can you send a screen shot and explain what you aren't seeing or what you are expecting to see. Maybe sharp eyes will see the issue.
Bill
|
|
|
Everett, Unless you have a lot of custom settings I would shutdown SW2, rename (preferred) or delete (you can get back to the old settings) the ELAD folder under you %User%\Documents folder. This will clear all custom settings (which you will need to recreate). Or try and find the error in the Presets Table as the error message says. Bill
toggle quoted message
Show quoted text
From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Everett N4CY via groups.io Sent: Tuesday, December 6, 2022 10:20 AM To: EladSDR@groups.io Subject: Re: [EladSDR] #fdm-SW2 How to expand the FM band so I can see 88 to 108MHz #fdm-sw2 Step (2) fixed the problem and I can see all of the FM band. Step (1) when I check "BW" then "Apply" I get this message. Then when I click OK this window comes up. Then if I go to another window and come back to the Graphic tab the "BW" is un-checked. Below is what the screen look like now.
In a message dated 12/5/2022 7:37:10 PM Central Standard Time, billct97@... writes:
Everett; 1. Settings / Graphics Tab / Full BW Spectrum (box should be checked). 2. Settings / Advanced Tab / Device Configuration (dropdown box) select 24MHz. 3. From the main SW2 interface, to the right of the frequency, if there are 3 magnifying glass icons - + X click the X to cancel the Zoom. If none of that helps please send a screen shot to show what’s happening. Bill Bill, I can send some screen shots tomorrow. I have a ELAD S3, which has 24MHz of band width, what I want is to be able to see is all of the 88 to 108MHz FM band at once. I am able to do that of SDR Console. Everett On Dec 5, 2022, at 3:49 PM, Bill Nollman <billct97@...> wrote:
Everett, can you send a screen shot and explain what you aren't seeing or what you are expecting to see. Maybe sharp eyes will see the issue.
Bill
|
|
|
Everett N4CY
Bill,
Thanks for your help.
Everett
In a message dated 12/6/2022 9:26:53 AM Central Standard Time, billct97@... writes:
toggle quoted message
Show quoted text
Everett,
Unless you have a lot of custom settings I would shutdown SW2, rename (preferred) or delete (you can get back to the old settings) the ELAD folder under you %User%\Documents folder. This will clear all custom settings (which you will need to recreate). Or try and find the error in the Presets Table as the error message says.
Bill
From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Everett N4CY via groups.io
Sent: Tuesday, December 6, 2022 10:20 AM
To: EladSDR@groups.io
Subject: Re: [EladSDR] #fdm-SW2 How to expand the FM band so I can see 88 to 108MHz #fdm-sw2
Step (2) fixed the problem and I can see all of the FM band.
Step (1) when I check "BW" then "Apply" I get this message.
Then when I click OK this window comes up.
Then if I go to another window and come back to the Graphic tab the "BW" is un-checked.
Below is what the screen look like now.
In a message dated 12/5/2022 7:37:10 PM Central Standard Time, billct97@... writes:
Everett;
1. Settings / Graphics Tab / Full BW Spectrum (box should be checked).
2. Settings / Advanced Tab / Device Configuration (dropdown box) select 24MHz.
3. From the main SW2 interface, to the right of the frequency, if there are 3 magnifying glass icons - + X click the X to cancel the Zoom.
If none of that helps please send a screen shot to show what’s happening.
Bill
Bill,
I can send some screen shots tomorrow. I have a ELAD S3, which has 24MHz of band width, what I want is to be able to see is all of the 88 to 108MHz FM band at once. I am able to do that of SDR Console.
Everett
On Dec 5, 2022, at 3:49 PM, Bill Nollman <billct97@...> wrote:
Everett, can you send a screen shot and explain what you aren't seeing or what you are expecting to see. Maybe sharp eyes will see the issue.
Bill
|
|
|
