|
I suppose there are no technical reason to have the RX connected for either of these functions. I really hope at least the memories will be made available without the RX.
In current implementation, the Station Memories window should not even come up in offline mode!
Especially in my battery powered AM QTH I have to be very conscious about power consumption. If I listen to recordings there, I will not have any of my receivers on. On the other hand, when I listen to these recordings back home, I find it unnecessary to plug in a receiver, as I do not have proper antennas here.
BR, Otso
--
Sent from my Android phone with GMX Mail. Please excuse my brevity.
toggle quoted message
Show quoted text
On 25.1.2022, 15.45 Vianney Colombat <vianney@...> wrote:
Ok, this is the problem. EQ and MEM tuning during OFFLINE mode (no FDM connected) are disabled now.
Will see what can be done.
Vianney
Il 25/01/2022 09:54, Otso Ylönen ha scritto:
Hello,
Yes, when playing back, I am normally offline, and without a receiver connected to the Computer at all.
BR, Otso
Lähetetty Windowsin Sähköpostiista
Otso, when you play back, you are in ONLINE mode or OFFLINE mode ? I.e. you run the SW2 with the GO button or with the OFFLINE button ?
Regards,
Vianney
Il 24/01/2022 17:14, Otso Ylönen ha scritto:
Thanks Vianney! Number entry to BW and filter fields work as expected now.
Regarding Station Memories, clicking on the rows on the list (see my earlier post) does nothing but changes the mode as I am playing back 1.5 MHz MW recordings and trying to jump to another MW frequency using the Station Memories window. During playback, the whole 1.5 MHz range is displayed, therefore, I do not think ”I am tuning outside of the displayed span”, right? I must be doing something wrong if no-one else has this problem!
BR, Otso
Lähetetty Windowsin Sähköpostiista
Version 3.54 should fix the issues on Notches and Filter BW.
Some information:
- for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
- it is not possible to tune outside the span displayed during a playback,
- the equalizer is disabled in OFFLINE mode.
Regards, and thank you for your comments,
Vianney
Il 22/01/2022 18:40, Otso Ylönen ha scritto:
Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.
As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.
I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?
BR, Otso
Lähetetty Windowsin Sähköpostiista
Sorry to report another (possible) v3.53 bug.
- I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
- The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).
Is anyone else having the same problem? I was using v3.50 before this update with no problem.
Bill Nollman
Farmington, CT
Hi Vianney,
I have done some testing already:
- I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
- The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
- I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
- I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
- It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional filters!
- The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
- Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!
Thank you for your continued work on this great piece of software!
BR, Otso
I have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:
Lähetetty Windowsin Sähköpostiista
Hello,
the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.
The most important changes are:
- possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
- added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
- improved keyboard shortcuts management (with addition of new shortcuts),
- added the possibility to use the memories even when playing a file,
- improved software stability for the S3.
Regards,
Vianney
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
|
|
|
Ok, this is the problem. EQ and MEM tuning during OFFLINE mode (no
FDM connected) are disabled now.
Will see what can be done.
Vianney
Il 25/01/2022 09:54, Otso Ylönen ha
scritto:
Hello,
Yes, when playing back, I am normally
offline, and without a receiver connected to the Computer at
all.
BR, Otso
Lähetetty Windowsin Sähköpostiista
Otso, when you play back, you are in ONLINE mode or OFFLINE
mode ? I.e. you run the SW2 with the GO button or with the
OFFLINE button ?
Regards,
Vianney
Il 24/01/2022 17:14, Otso Ylönen ha
scritto:
Thanks Vianney! Number entry to BW and
filter fields work as expected now.
Regarding Station Memories, clicking on
the rows on the list (see my earlier post) does nothing but
changes the mode as I am playing back 1.5 MHz MW recordings
and trying to jump to another MW frequency using the Station
Memories window. During playback, the whole 1.5 MHz range is
displayed, therefore, I do not think ”I am tuning outside of
the displayed span”, right? I must be doing something wrong
if no-one else has this problem!
BR, Otso
Lähetetty Windowsin Sähköpostiista
Version 3.54 should fix the issues on Notches and Filter BW.
Some information:
- for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
- it is not possible to tune outside the span displayed
during a playback,
- the equalizer is disabled in OFFLINE mode.
Regards, and thank you for your comments,
Vianney
Il 22/01/2022 18:40, Otso Ylönen ha
scritto:
Yes, same here with the BW entry. I
suppose there is really just one reson for these two
findings: all number input is currently sent to the main
frequency field.
As I use the TM-2 when playing back
files, I seldom need to enter anything to the BW field.
I would like to know if the memory
window works for anyone else. I.e. can you jump to the
frequencies saved into Station Memories when playing back
files?
BR, Otso
Lähetetty Windowsin Sähköpostiista
Sorry to report another (possible) v3.53
bug.
- I can no longer
double click on the number in the Filter BW box and
directly enter a bandwidth (for example 192000).
Entering any number only changes the main frequency.
- The good thing
is Z and X will step through the entries on the Demod
Settings Tab / BW Presets (which I previously didn’t
know about and works very nice!).
Is anyone else having the same problem? I
was using v3.50 before this update with no problem.
Bill Nollman
Farmington, CT
Hi Vianney,
I have done some testing already:
- I really
like the possibility to use keyboard commands during
playback, i.e. even if I use the mouse to jump within
the time scale.
- The
Ctrl-F & B are a nice addition, but as I like to use
quite a long file size (over 30 min), 10% is often too
much as a standard step. A possibility to set the
percentage (in settings) would be a great thing.
- I have
missed a way to quickly jump between frequencies during
live sessions. Therefore, I believe I learn to like to
Ctrl-Z/Y shortcuts.
- I was
not able to figure out how to use the Station Memories
window during file playback. I tried clicking with the
mouse as well as several key presses on the rows. The
only thing that changes is the mode, if defined with the
memory entry. (This is how it has been earlier, too.)
- It seems
that I cannot enter notch frequencies or related
bandwidths by typing them into the respective fields
anymore. Otherwise, I suppose that their usage with the
new shorcut Q might be bit quicker now. I hope this bug
will be quickly mended as I use both of the filters
almost all the time when listening to MW files (to block
adjacent channel QRM). I would actually like to have a
couple of additional filters!
- The
equalizer har really never worked for me: It is disabled
when I open the AF Window and the ”ON-button” is greyed
out.
- Jump to
start/end may turn out useful, but Ctrl-Shift-F does not
take you to the next file. It takes you near the end of
the current file and in my case with long files, you
have to wait a wile before playback takes you to the
next file. I would really appreciate proper jumping
between the file sequence. Back and forth!
Thank you for your continued work on
this great piece of software!
BR, Otso
I have lot of memory entries,
mostly MW offsets as well as ”watchlist for AM and FM:
Lähetetty Windowsin Sähköpostiista
Hello,
the version 3.53 of
the SW2 software is available in the Under test folder along
with some release notes.
The most important
changes are:
-
possibility to change the background of the spectrum
and to save on file all the colors that can be set by
the software,
- added the possibility to
choose whether to display 9 or 12 digits for the
Advanced Tuning window,
-
improved keyboard shortcuts management (with addition
of new shortcuts),
- added the possibility to use
the memories even when playing a file,
- improved
software stability for the S3.
Regards,
Vianney
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta
elettronica sono riservate e confidenziali e ne è vietata
la diffusione in qualunque modo eseguita (DL 196/2003).
Qualora Lei non fosse la persona a cui il presente
messaggio è destinato, La invitiamo ad eliminarlo e a non
leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any
attachments is confidential and may well also be legally
privileged (DL 196/2003). If you are not among the named
recipients, please notify the sender immediately by reply
e-mail and then delete this message from your system, do
not use the contents for any purpose whatsoever nor
disclose them to anyone else.
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta
elettronica sono riservate e confidenziali e ne è vietata la
diffusione in qualunque modo eseguita (DL 196/2003). Qualora
Lei non fosse la persona a cui il presente messaggio è
destinato, La invitiamo ad eliminarlo e a non leggerlo,
dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments
is confidential and may well also be legally privileged (DL
196/2003). If you are not among the named recipients, please
notify the sender immediately by reply e-mail and then
delete this message from your system, do not use the
contents for any purpose whatsoever nor disclose them to
anyone else.
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta
elettronica sono riservate e confidenziali e ne è vietata la
diffusione in qualunque modo eseguita (DL 196/2003). Qualora
Lei non fosse la persona a cui il presente messaggio è
destinato, La invitiamo ad eliminarlo e a non leggerlo,
dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments
is confidential and may well also be legally privileged (DL
196/2003). If you are not among the named recipients, please
notify the sender immediately by reply e-mail and then delete
this message from your system, do not use the contents for any
purpose whatsoever nor disclose them to anyone else.
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
|
|
|
Hello, Yes, when playing back, I am normally offline, and without a receiver connected to the Computer at all. BR, Otso Lähetetty Windowsin Sähköpostiista
Otso, when you play back, you are in ONLINE mode or OFFLINE mode ? I.e. you run the SW2 with the GO button or with the OFFLINE button ?
Regards,
Vianney
Il 24/01/2022 17:14, Otso Ylönen ha scritto: Thanks Vianney! Number entry to BW and filter fields work as expected now. Regarding Station Memories, clicking on the rows on the list (see my earlier post) does nothing but changes the mode as I am playing back 1.5 MHz MW recordings and trying to jump to another MW frequency using the Station Memories window. During playback, the whole 1.5 MHz range is displayed, therefore, I do not think ”I am tuning outside of the displayed span”, right? I must be doing something wrong if no-one else has this problem! BR, Otso Lähetetty Windowsin Sähköpostiista
Version 3.54 should fix the issues on Notches and Filter BW.
Some information:
- for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
- it is not possible to tune outside the span displayed during a playback,
- the equalizer is disabled in OFFLINE mode.
Regards, and thank you for your comments,
Vianney
Il 22/01/2022 18:40, Otso Ylönen ha scritto: Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field. As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field. I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files? BR, Otso Lähetetty Windowsin Sähköpostiista Sorry to report another (possible) v3.53 bug. - I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
- The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).
Is anyone else having the same problem? I was using v3.50 before this update with no problem. Bill Nollman Farmington, CT Hi Vianney, I have done some testing already: - I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
- The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
- I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
- I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
- It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional filters!
- The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
- Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!
Thank you for your continued work on this great piece of software! BR, Otso I have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:
Lähetetty Windowsin Sähköpostiista
Hello,
the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.
The most important changes are:
- possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
- added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
- improved keyboard shortcuts management (with addition of new shortcuts),
- added the possibility to use the memories even when playing a file,
- improved software stability for the S3.
Regards,
Vianney
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
--
Vianney Colombat
ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
-- Vianney Colombat ELAD Italy
Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.
The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
|
|
|
