1. Topics
  2. Need Help with FDM SW2 Load Please

Need Help with FDM SW2 Load Please

Pete
 

A little background info first: My new S3 will run on my old clunky i5 computer with v3.045 but it struggles with the wider bandwidths.
I got a new (to me) i5 Gen 8 with 8 GB RAM Win 10 machine and then downloaded v3,045 from the ELAD site.
The problem is when FDM SW2 is launched I get the Microsoft.NET Framework error "Could not load file or assembly 'BasicIFDLib.dll' or one of its dependencies. The specified module could not be found".  I checked and found the .dll in the X86  Program files ELAD folder. Suspecting that it was corrupted I copied the .dll from my old computer on to a thumb drive and replaced the .dll in the new machine. No joy.
I then deleted all ELAD files from the new machine, then copied 'ELAD_FDMSW2Setup_v3_045.msi' to the thumbdrive from the my old machine and loaded and launched SW2 in the new machine. SAME THING.
The problem is with the new machine. I allowed 'ELAD FDMSW2' and 'ELADSampler'  in Windows Defender Firewall to communicate. Again no joy.
I am at my wits end. Could one of you computer gurus (and I know you're out there) PLEASE HELP? I would be eternally grateful.

Pete
Bill Nollman
 

Pete;

 

If you only installed the 53MiB v3.045 without first installing a complete earlier release that would explain your problem.

Install the 113 MiB v3.027 first - http://eladit.com/download/sdr/FDM-sw2%20Software/Current%20release/3_027_FDM-SW2_Complete%20(first%20installation).zip

Then install v3.045 and you should have all of the dependencies.

 

Bill

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Pete
Sent: Saturday, October 17, 2020 5:37 PM
To: EladSDR@groups.io
Subject: [EladSDR] Need Help with FDM SW2 Load Please

 

A little background info first: My new S3 will run on my old clunky i5 computer with v3.045 but it struggles with the wider bandwidths.
I got a new (to me) i5 Gen 8 with 8 GB RAM Win 10 machine and then downloaded v3,045 from the ELAD site.
The problem is when FDM SW2 is launched I get the Microsoft.NET Framework error "Could not load file or assembly 'BasicIFDLib.dll' or one of its dependencies. The specified module could not be found".  I checked and found the .dll in the X86  Program files ELAD folder. Suspecting that it was corrupted I copied the .dll from my old computer on to a thumb drive and replaced the .dll in the new machine. No joy.
I then deleted all ELAD files from the new machine, then copied 'ELAD_FDMSW2Setup_v3_045.msi' to the thumbdrive from the my old machine and loaded and launched SW2 in the new machine. SAME THING.
The problem is with the new machine. I allowed 'ELAD FDMSW2' and 'ELADSampler'  in Windows Defender Firewall to communicate. Again no joy.
I am at my wits end. Could one of you computer gurus (and I know you're out there) PLEASE HELP? I would be eternally grateful.

Pete

Pete
 

Bill
THANK YOU!!
After a day and a half of fruitless pounding my head against the wall you have solved my problem. IT NOW WORKS!
This forum is an endless source of information.
Again, thank you my friend.

Pete
Paul Jones
 

You could have called or emailed support@... ???

 

Have a Radiolutionary Day!
Paul

--

Paul Jones - Elad USA Sales & Technical Support (USA)

FDM-Duo, Duo-Art, FDM-DUOR,  FDM-S3, FDM-S2, FDM-S2, FDM-SW2, T-Mate

Visit http://www.eladit.com for the full range of Elad Products or USA Sales : https://shop.elad-usa.com/

Email Support Group - https://groups.io/g/EladSDR

Sales Phone: 312.320.8160

Support Email: support@... Sales Email: sales@...
Personal Email: Paul@... 
 

 

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Pete
Sent: Saturday, October 17, 2020 18:32
To: EladSDR@groups.io
Subject: Re: [EladSDR] Need Help with FDM SW2 Load Please

 

Bill
THANK YOU!!
After a day and a half of fruitless pounding my head against the wall you have solved my problem. IT NOW WORKS!
This forum is an endless source of information.
Again, thank you my friend.

Pete

1 - 4 of 4