The subject says it all. VoA is currently using this mode for DRM test transmissions from Greenville. Is it possible (with sufficient signal strength) to decode the data/audio with an ELAD receiver an

Alberto: You are the owner of a great brain and a fantastic spirit for helping others in the radio hobby. Looking forward to more fine products from all of the Elad brain power. -- (Prof.) Richard Lan

According to Barbara Salatin, the sales manager of Elad USA, they will carry it eventually, but can not give an estimated date at this time, due to the modifications the engineers are making to the re

Slight correction: Anthorn is in Cumbria, ENGLAND. Mind you, it is only a few km from Solway Firth and the Scottish border. ;-) ------------------------------------------------------------------------

Tend to agree with Leif. Easy to skip over specific messages in my e-mail in-box for which I have less interest. -- Richard Langley --------------------------------------------------------------------

​What is the name of the Black Cat software for the Mac that can edit an Elad RF wav file? Or were you talking about Elad AF wav files? -- Richard Langley ---------------------------------------------

​Aren't we confusing two types of file here? The Elad RF wav files have a different structure than Elad AF wav files. I believe the AF files are standard audio wav files, which can be played and edite

When I wrote a Python script to automatically log the S-meter values on a particular frequency at specified time intervals, I found that I had to first send a command to set the LO frequency and then

This is great news! Will it be possible to have a command to retrieve higher-resolution signal-strength readings (better than just the single-digit S-meter values)? Thanks. -- Richard Langley --------

As I've mentioned before: 1) Display the correct stations from the SWSkeds file on the signal display when playing back an RF file. Use UTC from the file and not from the real-time computer time. 2) I

Dear Elad Team: It seems that when one plays back a recorded RF file, the station names displayed over the spectrum (say from an SWSkeds file) are not appropriate. The names displayed are for the curr

​Same problem with SWSkeds file. See attached. Problem with this particular files or the Elad software? Tried to find a pre-April file to check but they seem to have been removed from the SWSkeds file

I think this topic was discussed before but I can't seem to find the message in the group archives. It would be nice if the SW2 software could automatically and continuously log the time, frequency, a

Ditto. I know we should not be prolonging this age-old discussion of Windows vs. Macs but I'm a dyed-in-the-wool Apple supporter ever since my Apple II days in the early 1980s. In a research environme

[elad_sdr_en] wrote: Parallels is a Mac application so, if you're running the Mac OS, no need to boot into another operating systems. You just click on the application like any other Mac application.

Thanks for the advice, Bernard. Just getting back to this. Not much "play time" these days. :-( I see on the Elad website, we have a choice of 1) FDM-SW2_complete_setup_sw_1_37 2) FDM-SW2_only_setup_s

I discovered my problem. I had been trying to use the USBWebserver 8.5 (and 8.6) that I found on the www.usbwebserver.net website. I didn't realise that I had to use the special version (with the root

Hello: It might be moot point now, but the EiBi sked-a14.csv file from http://www.eibispace.de/ causes a problem for the FDM-SW2 version 1.12 software. It throws an error: "Error reading EiBi File / I

Hello: I, too, have been having difficulties with the server operation of the FDM-S2 SDR receiver with the FDM-SW2 software version 1.12 running under Windows 7 Enterprise on the BootCamp side of my M

For screenbvdumps in Windows on Mac Pro BootCamp: fn + shift + option +f11 (captures front window), then paste into Paint application and save in selected format. Omit "option" key for full screen dum