I had the SP-1 and now use the SP1a. Both are quiet. Do you have the SP1 externally powered (power poles) as well as using an inline audio amplifier to its input or is the speaker powered and only usi

Do you experience out-of-band noise on the 75m - 40m bands? The filters are very inexpensive and can help improve the SNR of the wanted signal.

No discussion, but an app note is here New PLL Options for ECSS and SYNC AM Demodulation.pdf https://www.eladit.com/it/download?path=sdr%2FFDM-sw2%20Software%2FDoc

Thank you for posting this replacement, I just ordered one.

#fdm-duo

SW2 with the DUO. Nothing like that on my end.

Some links I posted are not working. The one below should work... Everything is in the FDM-sw2-Software folder. http://sdr.eladit.com/ Mike

Hi Mike, Not sure about 3.043 but I needed to install the full "base" version first, and I upgraded that to the latest release. Links below. http://sdr.eladit.com/FDM-sw2%20Software/Current%20release/

Looks possible if you wire up an external micro-controller that has Wi-Fi

Did you assign outputs?

Try adjusting the AGC threshold (move it to the left)

Hi Henryk, The "hardware" has not changed, at least not that I am aware of but the FPGA firmware is loaded into the device via the SW2 software at startup. Use the latest SW2 like Paul suggested for t

Plug in the device. Download the driver from here http://sdr.eladit.com/FDM-S2%20Sampler/elad_fdm_driver.zip Make a folder on the desktop called ELAD Navigate to your device manager. Right click the o

Yes, you can use the FDM-S2 and the SW2 software to decode DRM transmissions. The antenna and SNR of the transmission is important. Depending on your location, I recommend trying to decode Radio Roman

How much would you like for the Tmate2 Thank you & 73 Mike-KD2KOG

Dave Thank you. I got everything figured out and working, I love this add on. Here is how I have mine configured. Maybe it will help someone else. ELAD Frontend is Blue HDSDR Frontend is Red 73 Mike-K

Afternoon all. I have the FDM-S2 with new SPF-08 and just wanted to verify that I did set up everything properly with the filters I own. Bank S1-FBP80-1 Band Pass 80m Bank S2-FBP40-1 Band Pass 40m Ban

Yes his software does work with Elads units. I tested it with my S1 and it does work without issues.

Afternoon all. As the title says. I just received the sw1 early today. Saying it's an amazing sdr is an understatement. Couple of questions I downloaded and install the sw1 software for elad without a