|
Remote not working
#fmd-s2
Hello everyone I am having trouble starting the remote control on my elad fdm-s2. I have everything set as in the description but it does not work. The server is running, the software will set the sam
Hello everyone I am having trouble starting the remote control on my elad fdm-s2. I have everything set as in the description but it does not work. The server is running, the software will set the sam
|
By
Tomasz K
· #20076
·
|
|
ELAD signal meter units from dBm to dBµV
#fmd-s2
#fdm-sw2
#smeter
#elad
This feature is now included in new FDM-SW2 software! --> Version 3.50 / July 16, 2021 12.added the possibility to change the measurement unit of the level from dBm to dBuV by clicking on the level va
This feature is now included in new FDM-SW2 software! --> Version 3.50 / July 16, 2021 12.added the possibility to change the measurement unit of the level from dBm to dBuV by clicking on the level va
|
By
holmch66@...
· #19663
·
|
|
ELAD signal meter units from dBm to dBµV
#fmd-s2
#fdm-sw2
#smeter
#elad
1uV (0dBuV) = -107dBm in 50Ω SO just mentally add or subtract 107dB Andy www.g4jnt.com
1uV (0dBuV) = -107dBm in 50Ω SO just mentally add or subtract 107dB Andy www.g4jnt.com
|
By
Andy G4JNT
· #19563
·
|
|
ELAD signal meter units from dBm to dBµV
#fmd-s2
#fdm-sw2
#smeter
#elad
Hello, when use my ELAD FDM-S2 on FM I would like occassionally to change the signal meter units from dBm to dBµV. Would that be possible by some settings or SW-modification? Alternately, would it be
Hello, when use my ELAD FDM-S2 on FM I would like occassionally to change the signal meter units from dBm to dBµV. Would that be possible by some settings or SW-modification? Alternately, would it be
|
By
holmch66@...
· #19562
·
|
|
No Mute via TCP?
#fdm-sw2
#fmd-s2
Done. Note that even in the s2, mute works when omnirig is enabled so it shouldn't be too hard. Also requested an option to mute when the detected signal level exceeds a user selectable value. Most SD
Done. Note that even in the s2, mute works when omnirig is enabled so it shouldn't be too hard. Also requested an option to mute when the detected signal level exceeds a user selectable value. Most SD
|
By
Jeff Patterson
· #16385
·
|
|
No Mute via TCP?
#fdm-sw2
#fmd-s2
Has anyone raised a feature request ticket about the lack of a mute option in the TCP server when used with the S2? It should be simple just to replicate the transmit command which obviously mutes a D
Has anyone raised a feature request ticket about the lack of a mute option in the TCP server when used with the S2? It should be simple just to replicate the transmit command which obviously mutes a D
|
By
Neil Smith G4DBN
· #16384
·
|
|
No Mute via TCP?
#fdm-sw2
#fmd-s2
True but expecting users to write software to fix problems is often a bridge too far IMHO. Jeff
True but expecting users to write software to fix problems is often a bridge too far IMHO. Jeff
|
By
Jeff Patterson
· #16383
·
|
|
No Mute via TCP?
#fdm-sw2
#fmd-s2
Hi Jeff, Great, that's exactly how it should be. A interconnection SW2 <> RIG using TCP/Omni/ComPort, depending on what we want to achieve, can resolve many problems that are coming up sometimes here
Hi Jeff, Great, that's exactly how it should be. A interconnection SW2 <> RIG using TCP/Omni/ComPort, depending on what we want to achieve, can resolve many problems that are coming up sometimes here
|
By
Raimund
· #16381
·
|
|
No Mute via TCP?
#fdm-sw2
#fmd-s2
Hi Raimund, My C# program for rig synchronization is working well. To solve the mute issue I ended up using a .Net package (available from nuget) which provides C# wrappers around the MS CoreAudio API
Hi Raimund, My C# program for rig synchronization is working well. To solve the mute issue I ended up using a .Net package (available from nuget) which provides C# wrappers around the MS CoreAudio API
|
By
Jeff Patterson
· #16375
·
Edited
|
|
No Mute via TCP?
#fdm-sw2
#fmd-s2
Hi Jeff, when a TCP is connected correctly with the right millisecond interval you get and set the Frequency, Mode, S-Meter data ecc... as the primary data you need. In any case the read/set sequence
Hi Jeff, when a TCP is connected correctly with the right millisecond interval you get and set the Frequency, Mode, S-Meter data ecc... as the primary data you need. In any case the read/set sequence
|
By
Raimund
· #16369
·
|
|
No Mute via TCP?
#fdm-sw2
#fmd-s2
I'm writing a program to synchronize my transceiver frequency to the fdm-s2 and visa-versa without using Omnirig which has some unfortunate side effects. It's working fine but now the SDR does not mut
I'm writing a program to synchronize my transceiver frequency to the fdm-s2 and visa-versa without using Omnirig which has some unfortunate side effects. It's working fine but now the SDR does not mut
|
By
Jeff Patterson
· #16355
·
|
|
Problems with FDM-SW2 3.027
#fdm-sw2
#fmd-s2
Hi Neil, If you are referring to the performance counter issue, I just ran the command prompt as admin and executed >lodctr /R in C:\Windows\system32 The audio issue was fixed in the audio tab of the
Hi Neil, If you are referring to the performance counter issue, I just ran the command prompt as admin and executed >lodctr /R in C:\Windows\system32 The audio issue was fixed in the audio tab of the
|
By
Jeff Patterson
· #16296
·
|
|
Problems with FDM-SW2 3.027
#fdm-sw2
#fmd-s2
Hi Jeff, did you have to change to the SysWOW64 folder, or did it work OK in system32? Would be useful to note so others will find the solution, and maybe we can update the FAQ. Mine definitely fails
Hi Jeff, did you have to change to the SysWOW64 folder, or did it work OK in system32? Would be useful to note so others will find the solution, and maybe we can update the FAQ. Mine definitely fails
|
By
Neil Smith G4DBN
· #16295
·
|
|
Problems with FDM-SW2 3.027
#fdm-sw2
#fmd-s2
The performance counter was fixed using the method in the FAQ (thanks!) I fixed the audio crash by increasing the Soundcard Play Buffer Size (Audio tab in set-up) from 50ms to 1200ms Thanks Jeff
The performance counter was fixed using the method in the FAQ (thanks!) I fixed the audio crash by increasing the Soundcard Play Buffer Size (Audio tab in set-up) from 50ms to 1200ms Thanks Jeff
|
By
Jeff Patterson
· #16294
·
|
|
Problems with FDM-SW2 3.027
#fdm-sw2
#fmd-s2
Hi Jeff, the performance counter error is a common Windows fault. Easy to fix using lodctr /r from a Windows command prompt. You may need to chage to the SysWOW64 directory: What exactly happens when
Hi Jeff, the performance counter error is a common Windows fault. Easy to fix using lodctr /r from a Windows command prompt. You may need to chage to the SysWOW64 directory: What exactly happens when
|
By
Neil Smith G4DBN
· #16293
·
|
|
Problems with FDM-SW2 3.027
#fdm-sw2
#fmd-s2
Hello Jeff, see this FAQ for the first issue : http://support.eladit.com/kb/faq.php?id=32 If the other issues persist, can you open a support ticket here http://support.eladit.com/open.php?&lang=en_us
Hello Jeff, see this FAQ for the first issue : http://support.eladit.com/kb/faq.php?id=32 If the other issues persist, can you open a support ticket here http://support.eladit.com/open.php?&lang=en_us
|
By
Vianney Colombat
· #16292
·
|
|
Problems with FDM-SW2 3.027
#fdm-sw2
#fmd-s2
This was a first-time install on a high-end HP laptop running 64-bit Windows 7 The install ran to successful completion. When I run FDM-SW2 I always get this error: The GUI doesn't show CPU usage A mo
This was a first-time install on a high-end HP laptop running 64-bit Windows 7 The install ran to successful completion. When I run FDM-SW2 I always get this error: The GUI doesn't show CPU usage A mo
|
By
Jeff Patterson
· #16291
·
|
|
SW2 crashes after Windows updates
#fdm-sw2
#fmd-s2
Meanwhile I've found that there were additional USB-devices under the Human Interface Devices heading in Device Management that were enabled to power down. I unchecked all of them of course. I suspect
Meanwhile I've found that there were additional USB-devices under the Human Interface Devices heading in Device Management that were enabled to power down. I unchecked all of them of course. I suspect
|
By
Ad Dieleman
· #16003
·
|
|
SW2 crashes after Windows updates
#fdm-sw2
#fmd-s2
That's OK and updated. Nota: I'm using only Box-PC's. Raimund .
That's OK and updated. Nota: I'm using only Box-PC's. Raimund .
|
By
Raimund
· #15989
·
|
|
SW2 crashes after Windows updates
#fdm-sw2
#fmd-s2
So would this be OK? On pressing the second button I get Framework 4.7 or later.
So would this be OK? On pressing the second button I get Framework 4.7 or later.
|
By
Ad Dieleman
· #15985
·
|