Has there been any progress on the getting the new DRM decoder codecs to work .

#fdm-sw2

Hello, see this FAQ : http://support.eladit.com/kb/faq.php?id=29 Vianney Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione

#fdm-sw2 #fdm-duo

I guess the team in Italy have an awful lot on their minds at the moment, raising a ticket is best so the request is recorded. Agreed, getting a marker in the right spot is very hard. I'd like to be a

#fdm-sw2 #fdm-s2 #smeter

First tests of the complete station in contest mode. Excellent general performance, some finishing is missing but everything worked immediately. Excellent performance of DUO-ART, the wait was fully re

#fdm-duo #elad #eladit #fdm-sw2

Hi Jeff, i enclose a screenshot that is self explanatory. You can do that. The Radio frequency is: 7.026,03 The "Frequencies worked display View" is evidencing the saved Freq: 7.025,05 Here with this

#fdm-sw2 #fdm-s2

Done. Note that even in the s2, mute works when omnirig is enabled so it shouldn't be too hard. Also requested an option to mute when the detected signal level exceeds a user selectable value. Most SD

#fdm-sw2 #fmd-s2

Hi Neil, If you are referring to the performance counter issue, I just ran the command prompt as admin and executed >lodctr /R in C:\Windows\system32 The audio issue was fixed in the audio tab of the

#fdm-sw2 #fmd-s2

Hello Scott I am not usual to work with USB mic, i have connected a old Kenwood MC-80 to rear plug, and works. But i had tried to do what you ask and only for a example i have success to work with a U

#fdm-duo #fdm-sw2

Unfortunately the FDM-SW2 software does not implement the possibility to change the shortcuts mapping. Vianney Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confi

#fdm-duo #fdm-sw2

Can't restore from a good profile?

#fdm-sw2

Meanwhile I've found that there were additional USB-devices under the Human Interface Devices heading in Device Management that were enabled to power down. I unchecked all of them of course. I suspect

#fdm-sw2 #fmd-s2

Though I've followed tutorials supplied by Elad (which are minimal) I'm unable to get CW Skimmer to synchronize frequencies with my SW2 for more than a moment or two. Skimmer typically displays the fr

#fdm-sw2

Howdy Neil, interesting stuff, to be sure. Well I experimented and reproduced what I thought you described. I put SW2 in direct mode with the DUO, then I changed freq. on the SW2 slider for channel RX

#comport #fdm-duo #fdm-sw2 #wsjt-x #fldigi