Als Ham gebruik ik N1MM, met mijn grote Kenwood TX. Nu heb ik de S2 what are the settings for using N1MM and S2 With Omnirig can I run just one px. VSPE don't help me. Help are welcome 73, de ON3MK Ma

#fdm-sw2 #fdm-s2

John, That version is unsupported now, you should really be on 3.027 at a minimum, try that and see if qrm goes away first then we can go further if needed Paul EladUSA

#fdm-s2

Hi Antony, this is what I've done some time ago for GQRX and S1/S2/DUO on MAC http://www.eladit.com/download/sdr/Linux/elad-gqrx-1.2-mac.tgz Launching the program it sets the environment for GQRX, loa

#fdm-s2 #linux

I am putting all my "utilities" type monitoring (WSPR, HFDL, etc) on inexpensive SDRs hooked up to (Debian) single board computers that I can monitor through a web interface. This leaves my FDM-SW2 an

#elad #fdm-s2

Many thanks to you all guys for help and suggestions. Problem solved! 73s de Roland

#fdm-s2

Now sold.

#fdm-s2

I guess the team in Italy have an awful lot on their minds at the moment, raising a ticket is best so the request is recorded. Agreed, getting a marker in the right spot is very hard. I'd like to be a

#fdm-sw2 #fdm-s2 #smeter

Excellent condition Elad FDM-S2 and TMate controller. $625 (or best offer) for the pair plus actual shipping. CONUS only Contact me direct if interested.

#fdm-s2

I am looking to part with an FDM-S2 paired with a TMate. USA only. If interested, please message me separately. Serious inquiries only, please.

#fdm-s2

Thanks Neil, I have an SDR-IQ which will go well below 11.7HZ/FFT point but I was wondering if the DUO-SW2 can be set to below 153.6kHZ visible span with nearer to 6HZ /FFT point to sharpen the main p

#elad #fdm-duo #fdm-s2

Yes, it's just switching out the attenuator. Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (

#fdm-s2

Simple enough to write a bit of code to pull the levels into an S meter application over the TCP interface in SW2. If I send a sequence of "RX00;" commands to the enabled port 1893 TCP server in SW2,

#fdm-s2