|
4Sale: FDM Duo
#fdm-duo
I have an Elad FDM Duo for sale. It is in both excellent cosmetic and operational shape. I'm asking a little more than the going rate as this unit was sent last year to Exline repair and had the main
I have an Elad FDM Duo for sale. It is in both excellent cosmetic and operational shape. I'm asking a little more than the going rate as this unit was sent last year to Exline repair and had the main
|
By
Carl Jón Denbow
·
Edited
|
|
FDM DUOr remote access 10 messages
#fdm-duo
Hi Paul, I just tried to run SDR console in remote server mode, and this doesn't work. Apparently the FDM-DUO isn't supported in remote mode. Do you happen to know why? SDR console works great when co
Hi Paul, I just tried to run SDR console in remote server mode, and this doesn't work. Apparently the FDM-DUO isn't supported in remote mode. Do you happen to know why? SDR console works great when co
|
By
Pez T
·
|
|
10MHz reference input 7 messages
#fdm-duo
Hi Espen, Good to know you got it to work ! Best 73 John G0API
Hi Espen, Good to know you got it to work ! Best 73 John G0API
|
By
John Fell
·
|
|
Only 10% PWR SSB output with SW2 and SDR-console 3 messages
#fdm-duo
Hi Neil, yes that was the first thing I tried. AUX VOL is set to 100. It used to be fine with the default setting until either a Windows update or a WSJT update, so I don't think it's an Elad problem.
Hi Neil, yes that was the first thing I tried. AUX VOL is set to 100. It used to be fine with the default setting until either a Windows update or a WSJT update, so I don't think it's an Elad problem.
|
By
Tony EI8JK
·
|
|
Nice replacement knob for FDM-DUO 6 messages
#fdm-duo
My LoveMySwitches.com knob arrived today. See attached photo. The new knob is exactly the correct size. It has two (2) set screws and is very stable on the encoder shaft. The knob also has a very nice
My LoveMySwitches.com knob arrived today. See attached photo. The new knob is exactly the correct size. It has two (2) set screws and is very stable on the encoder shaft. The knob also has a very nice
|
By
...
·
|
|
FDM-Duo and 10MHz reference
#fdm-duo
Hi, I read in the manual, considering Item #12: 1.3.1 Main Features Reception frequency range: 9kHz to 54MHz in direct sampling mode. Transmission bands: 160m to 6m. Selectable output power of 5
Hi, I read in the manual, considering Item #12: 1.3.1 Main Features Reception frequency range: 9kHz to 54MHz in direct sampling mode. Transmission bands: 160m to 6m. Selectable output power of 5
|
By
la1rq@...
·
Edited
|
|
CW WPM Setting Quick Change 5 messages
#fdm-duo
I think this is stated in the manual somewhere. El dom., 12 sept. 2021 22:19, phoekzema Hoekzema <phoekzema@...> escribió
I think this is stated in the manual somewhere. El dom., 12 sept. 2021 22:19, phoekzema Hoekzema <phoekzema@...> escribió
|
By
Luis Miguel Castañeda
·
|
|
#fdm-duo 8 messages
#fdm-duo
Yes , menu 6 AUX VOL , on my ELAD play on the TX USB port . If you stay at 0 you have no sound on the ELAD sound port . I use HAMRADIO DELUXE and Cwget 150 and all us ok with aux vol at level 35. Note
Yes , menu 6 AUX VOL , on my ELAD play on the TX USB port . If you stay at 0 you have no sound on the ELAD sound port . I use HAMRADIO DELUXE and Cwget 150 and all us ok with aux vol at level 35. Note
|
By
Bertrand Gay
·
|
|
Predistortion with FDM-DUO? 11 messages
#fdm-duo
#duo-art
#fdm-sw2
Hello Vianney, Thank you for your quick response. I am of course disappointed but understand that there are business decisions to be made with limited resources. I would however like to point out that
Hello Vianney, Thank you for your quick response. I am of course disappointed but understand that there are business decisions to be made with limited resources. I would however like to point out that
|
By
Jim AJ8S
·
|
|
FDM DUO GAIN VARIATION 3 messages
#fdm-duo
Yes, as I said, it shows to within 1dB the level I put into the -Duo. Tested at 20MHz, but there's no reason it should be wildly different at other frequencies. Andy www.g4jnt.com
Yes, as I said, it shows to within 1dB the level I put into the -Duo. Tested at 20MHz, but there's no reason it should be wildly different at other frequencies. Andy www.g4jnt.com
|
By
Andy G4JNT
·
|
|
Hooked up Hardrock-50 amplifier to FDM-DUO - Getting Demod Error 10 messages
#fdm-duo
For the same $2200 that I would spend on the HR500, I purchased the KM3KM Mercury III 1.2KW amp. I do like my HR50, but the HR500 is over-priced in my opinion. With the Mercury III, 10w in = 665w out.
For the same $2200 that I would spend on the HR500, I purchased the KM3KM Mercury III 1.2KW amp. I do like my HR50, but the HR500 is over-priced in my opinion. With the Mercury III, 10w in = 665w out.
|
By
Mark WU6R
·
|
|
wsjtx not responding 3 messages
#wsjt-x
#fdm-duo
Thanks Paul, I'll give it a try. Regards, Dennis W7DRW 73
Thanks Paul, I'll give it a try. Regards, Dennis W7DRW 73
|
By
Dennis
·
|
|
FDMDUO and a BUG keyer 9 messages
#fdm-duo
Bug working with my FDM-DUO... My thanks to all Happy Dance :-)
Bug working with my FDM-DUO... My thanks to all Happy Dance :-)
|
By
...
·
|
|
#FDM-DUO spurious 31 messages
#fdm-duo
All my tests were also performed stand alone. What I see is the not the same thing than Neil (Neil's looks even more interesting!). The "spurs" follow the main signal when moving frequency. For Klaus
All my tests were also performed stand alone. What I see is the not the same thing than Neil (Neil's looks even more interesting!). The "spurs" follow the main signal when moving frequency. For Klaus
|
By
Jean Louis Maridet
·
|
|
#FDM-DUO spurious? 2 messages
#fdm-duo
Hi Jean-Louis, For improving your transverter XO stability you may google for 'crystal heater'. Easy to implement and very cost effective. 73, Klaus, DK3QN Am 02.12.2020 um 18:32 schrieb Jean Louis Ma
Hi Jean-Louis, For improving your transverter XO stability you may google for 'crystal heater'. Easy to implement and very cost effective. 73, Klaus, DK3QN Am 02.12.2020 um 18:32 schrieb Jean Louis Ma
|
By
Klaus Brosche, DK3QN
·
|
|
Monitoring ALC? 4 messages
#fdm-duo
Hello Peter, Glad your pleased with the ART-60 ..I never input more than 1 watt from the Duo ..no trouble on FT8 FT4 Js8call WJSXT & Hell ( my favourite ) all worked as expected ..as long as you set t
Hello Peter, Glad your pleased with the ART-60 ..I never input more than 1 watt from the Duo ..no trouble on FT8 FT4 Js8call WJSXT & Hell ( my favourite ) all worked as expected ..as long as you set t
|
By
Morris G1PIB
·
|
|
How to set memories in the FDM-DUO (NOT in SW2!). 8 messages
#fdm-duo
The hacker mindset never fails... Enjoy! Neil G4DBN
The hacker mindset never fails... Enjoy! Neil G4DBN
|
By
Neil Smith G4DBN
·
|
|
FDM-DUO with low power drive BLF188 / eb104 solid state type amplifer? 5 messages
#eladduo
#fdm-duo
I'm using FDM-Duo with Juma PA1000. Mostly with FT8 at 700 W out with reduced voltage 50 volts on LDMOS 1x BLF188. If I put normal LDMOS voltage 55 volts (it is menu selection in amplifier), then can
I'm using FDM-Duo with Juma PA1000. Mostly with FT8 at 700 W out with reduced voltage 50 volts on LDMOS 1x BLF188. If I put normal LDMOS voltage 55 volts (it is menu selection in amplifier), then can
|
By
Marko Myllymaki
·
|
|
new fdm duo owner question - FM Broadcast reception w/SW2 9 messages
#fdm-duo
first of all, many thanks to G4DBN and others here who have chimed in with helpful hints regarding WFM reception using my new FDM Duo and SW2 i am going to admit it here - in public: i am an idiot...
first of all, many thanks to G4DBN and others here who have chimed in with helpful hints regarding WFM reception using my new FDM Duo and SW2 i am going to admit it here - in public: i am an idiot...
|
By
...
·
|
|
Band Plans 4 messages
#fdm-duo
#eladduo
Paul, I've postponed this task until now, to give me time to finish my shack @ home. So now downloaded 'Bandplan US 2.0'. The app connects to the radio but will not allow me to write to the radio. " F
Paul, I've postponed this task until now, to give me time to finish my shack @ home. So now downloaded 'Bandplan US 2.0'. The app connects to the radio but will not allow me to write to the radio. " F
|
By
Hose
·
|