Good Evening Everybody, This is my first post in anticipation of receiving my new FDM-DUO transceiver. Does anyone know the inside and outside dimensions of the power supply plug? 73 Mark KK2L

Hi Everybody, I should have my red transceiver this Friday and am looking forward to it. Having owned a KX3 and KX2, one of my concerns would be heat buildup while operating the digital modes or SSB a

Hi Everybody (again), Just prepping for the arrival of my new (red) ELAD FDM DUO and thinking about what I will need to get it going out of the box. I do have experience with VPSE and VAC having owned

Hi Everybody, Expecting my new FM DUO today and was thinking about alternative microphone to the OEM included with the radio. I saw it in a video that this rig is ICOM compliant. I think it was a ARRL

FB. It looks like there is an adaptor (OPC-589), from ICOM, that goes from 8 pin modular to 8 pin male adaptor that is available. This would allow me to use a variety of ICOM mics. Of course, assuming

Great advice. Thanks. Is it safe to assume you were using an amp with the Symetrix 528e? 73 Mark KK2L

Hi Neil, I am using my FDM DUO with SW2. I have used WSJT-x for about 3 years with my FLEX and ANAN radios. I have the three USB cables all plugged in. for the DUO, and I am getting decoding and CAT c

Hi Everybody, Just made my first contact on FT8 at 8 watts using my Ciro Mazzoni Stealth Loop. When I closed SW2, WSJT-x was working directly with the rig. If anyone knows a workaround to get SW2 work

Thank-you. Now that I have actually received the radio, I am satisfied with the build quality of the microphone and will stick with it for a while. I just completed a 1600km QSO on 7 watts. So, I am s

I agree. After using it for about 3 hours and achieving these contacts, from Southern NJ, I can say the case was warm but did not overheat. I was very pleasantly surprised by the performance after jus

Happy New Year All, I have used HRD for the last 5 years. This experience, with the software, has been with my ANAN and FLEX radios I have set it up, for my ELAD FM DUO, as a TS480 using the dedicated

Hi Neil, I tried your suggestion of Menu#54 using RTS+IN. However, when I open HRD, using this setting, the radio immediately goes into TX. When taken out of TX, the radio will still not transmit when

Hi, I did attempt to use DM780 standalone without HRD control window. I found I could manually click on the TX button and the radio would go into TX. However, when attempting to send macro message, ra

I was using the default Macros that come with the software. I have been using FLDIGI for the last 3 years so I am forgetting what the HRD macros should look like but I know there are no TX tags in HRD

Hello Everyone, I must have made a noobie mistake but I am currently getting no waterfall and no trace on the panadapter. Where should I be looking to turn these back on? I have full rig control other

Hello Alain, I am still having the same issue. It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios. I am able

Happy New Year All, Yes, I would be looking for this information as well. Laptops, of course, run out of power in less than 2 hours. I would also be interested in knowing if anyone is using DRAWS pi h

Hello Alain, I have HRD already configured as you describe here. The TX button, in the radio section, in DM780 will key up the radio if I manually apply it. My problem is that when I am attempting to

Thank you for these ideas. I haven’t checked on them. The fact that I’m experiencing the same problems with two different radios indicates that I have overlooked something really simple. I know for su

No luck, yet, but I think I am getting closer. Here are two of my macros. Neither one will go into TX when I click Send. Do you see something wrong in the way they are written? #++ # # End of a reply