Thanks Neil, Is it possible to have direct audio from the rig, and SW2 at the same time? When I'm in Remote (SW2) mode, I get no audio from the Rig. (I'm running in 1.536 MHz bandwidth mode, for lower

Perhaps you are all using external keyers with SW2? And nobody is using the built in keyer in the FDM-DUO? I assume there is no ideal solution for this?

Hi all, I use SW2 to control my FDM-DUO, and I want to have sidetone with I use CW. The problem is that I need to have "Mute RX on PTT" selected, so that I don't hear myself when TXing on SSB, etc. As

Hi mate! Nice to see you here. Yes I had considered this, but it's a very clunky solution when I spend about equal time in front of the rig, as I do away from it. That means I would need to remember t

Hi all, My FDM-DUO is only outputting a maximum of around 3-4 watts on the 10m band (around 28.490ish). Lower bands are producing in excess of 5 watts, and seem to work as expected. (TX Power Setting

#fdm-duo

Thanks Espen, I have created a ticket for this feature request. @DB4TA did you get a reply to your ticket as yet? 73

Hello Elad, I use my FDM DUO with SW2 remotely, via Splashtop remote desktop. For remote use, SWR, Power, and ALC is missing from the SW2 software. In order to view this important information, I have

I purchased an FDM-DUO that had paint scratches on the front of the knobs. My solution, was to remove the knobs and gently sand the front faces back to bare metal using fine Scotchbrite sanding pads.

Thanks Giovanni, Yes I am aware of this, I already use Splashtop for this purpose, however I was asking more about the possibility of something like this (SW2 server/cleint, or a IP remote hardware in

#linux #duo-art #wsjt-x

Hi Giovanni / ELAD, Is there any likelihood of an IP remote solution to control the FDM-DUO or FDM-SW2, that doesn't require the ART? Either as a hardware based add-on box, or a software based (FDM-SW

#linux #duo-art #wsjt-x

Hi all, Is it possible to view SWR in the FMD-SW2 software? I am operating my FDM-DUO with FDM-SW2 remotely (via Splashtop Enterprise) and I really need to be able to monitor VSWR. I was expecting (ho

Hi all, Occasionally when using my FDM-DUO with SW2, the tuned frequency (the one I am listening too) and the IF (the one on the radio display itself) will start to slowly drop downwards, at the step

Thanks for the input guys. I can't see any difference between having the option selected, and not. The TX panel is working fine here (although the slight delay is noted). I must be looking in the wron

Hello all, I do a bit of ESSB experimentation here in VK, and I am wondering if there is a way to increase the FDM-DUO TX bandwidth beyond 4kHz wide? Most (if not all) other popular SDR transceivers a

Hello all, I have an FDM-DUO which I love, I have been using it for phone and digital modes with great success. Can I ask (as the manual doesn't cover this) what does the "Use FDM-DUO TX Control Panel

Hi Paul, I just tried to run SDR console in remote server mode, and this doesn't work. Apparently the FDM-DUO isn't supported in remote mode. Do you happen to know why? SDR console works great when co

#fdm-duo