I have a setup of Elad FDM-DUO, DUO ART 120 W and Ciro Mazzoni Baby Loop w/A.T.U. 2.0. loop controller. In this setup I want to run the loop controller in automatic mode, i.e. automatically change the

#elad #comport #externalcontrol #duo-art

Hello Lars Erik, if you still have this issue, please create a ticket here : http://support.eladit.com/open.php Thank you, regards, Vianney Le informazioni contenute in questo messaggio di posta elett

#elad #comport #externalcontrol #duo-art

Hi all, I REALLY HOPE that someone can help me with this issue - it's driving me NUTS!!! I've connected the FDM DUO to the DUO-ART exactly as shown in the owners manual. I'll attach a photo to show th

#duo-art

PAUL JONES (Head if Technical Support for ELAD) contacted me and suggested the problem is more than likely caused by the FDM DUO firmware not being up to date. I’ll update it in the morning and report

#duo-art

Tom, You keep going complaining here and you've got lots of advice from fellow hams in this forum re. their suggestions in order to locate the root cause. BUT you (almost) never respond to these sugge

#duo-art

Thomas, I was just wondering where you have the cable connected to that is plugged into the headphone socket? Oh, and I’m not the head of technical support, just a mere support minion… 😉 -- Paul Jones

#duo-art

Jeez......after seeing the photos now I want a red one...........that is just sharp!!!!! Regards & 73 Carr KF4VAR

#duo-art

Hello, I would like to install some filters to my Duo-Art amplifier. In the manual there is no photo of the board. What is the numbering of the slots? Is the first slot at the inner side or at the out

#duo-art

Hello Ernst, see the PDF file I have attached. Regards, Vianney Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualun

#duo-art

The DUO-ART has a built-in FT-817 INTERFACE Mode, but no FT-817 INTERFACE LEAD! Seems ridiculous to me, but that's how it is. So you are left to make up your own lead but provided with virtually no in

#duo-art #ft-817

Thomas, it looks as if you're going to have to suss it yourself. The reason that there is no ready-made cable is that the ACC socket is also used for CAT control, and if one wished to keep that , then

#duo-art #ft-817

Thomas I think you can use a 817 cat cable that is wired up for cat, just waiting on getting this confirmed as the port is dual use Will get back to you ASAP Paul EladUSA

#duo-art #ft-817

The CT62 cable but will let you know...

#duo-art #ft-817

Anything more Paul?? :-)

#duo-art #ft-817

Lars Was there any solution to this problem? I have the same issue in that EXTIO-232 works fine but the FDM-DUO does not send regular frequency status info automatically. This means that my amplifier

#elad #comport #externalcontrol #duo-art

I find it VERY frustrating to learn that ELAD sell an amplifier (DUO-ART) which boasts in the marketing specifications as having a dedicated FT-817 MODE, but then doesn't provide (or offer to sell) an

#duo-art #ft-817

It looks pretty straightforward if the 817 runs serial CAT data out of the ACC socket. The DUO-ART serial socket looks like a normal RS232 so a three-wire connection for ground, RXD and TXD should be

#duo-art #ft-817

Hmm. Looking at the Duo-Art Manuel (Description of the Rear Connectors) shows: 7- RS-232 portDB9 connector for the FT-817 interface acting on an RS-232 serial link. Let me Google that for you: Yaesu F

#duo-art #ft-817

No, that didn't work. The Yaesu CAT isn't a standard RS-232 serial Protocol. Different Voltage Levels i think. A Yaesu CT-62 CAT Interface is needed for serial Connection. I think, ELAD had send him t

#duo-art #ft-817

Hmm. I already have the CT-62 CAT Interface with DB9 Connector. That DOES NOT provide you with a PPT connection for the DUO-ART. It provides you with CAT control but another cable to the amp's 3.5mm P

#duo-art #ft-817