Can't restore from a good profile?

#fdm-sw2

Greetings all Ok got some stray rf in the schack that fubared the PC i now have that fixed but i do not remember what setting on both the DUO and on my PC. I either get my voice coming out the speaker

#fdm-sw2

Meanwhile I've found that there were additional USB-devices under the Human Interface Devices heading in Device Management that were enabled to power down. I unchecked all of them of course. I suspect

#fdm-sw2 #fmd-s2

That's OK and updated. Nota: I'm using only Box-PC's. Raimund .

#fdm-sw2 #fmd-s2

So would this be OK? On pressing the second button I get Framework 4.7 or later.

#fdm-sw2 #fmd-s2

Checked this and the Root hub for USB 3.0 was enabled to power down. Unchecked this, fingers crossed. Thanks!

#fdm-sw2 #fmd-s2

One thing you might want to check in Device Manager (in Windows) check the USB Root Hub. Check the Power Management option under Properties in Device Manager (Windows) and make sure the "Allow the Com

#fdm-sw2 #fmd-s2

For sure this is not depending on your FDM-SW2 or SDR Receiver. It is depending on your system and Platform configuration. Any suggestion is a guess as we don't have your PC in front. Often it is depe

#fdm-sw2 #fmd-s2

Thanks, good to know that I'm not the only one but not so good to hear that there isn't a solution (yet).

#fdm-sw2 #fmd-s2

I have the same problem, already for a long time, but so far no response. John Märsylä

#fdm-sw2 #fmd-s2

For the last few weeks I get crashes of the ELAD FDM-SW2 program: it suddenly stops while receiving, last night even during a recording, while no other program was opened. I'm running it on a Macbook

#fdm-sw2 #fmd-s2

Though I've followed tutorials supplied by Elad (which are minimal) I'm unable to get CW Skimmer to synchronize frequencies with my SW2 for more than a moment or two. Skimmer typically displays the fr

#fdm-sw2

Howdy Neil, interesting stuff, to be sure. Well I experimented and reproduced what I thought you described. I put SW2 in direct mode with the DUO, then I changed freq. on the SW2 slider for channel RX

#comport #fdm-duo #fdm-sw2 #wsjt-x #fldigi

Thanks Neil. Two attachments - help me with their accuracy please and I'll update. I'll experiment a little on your feedback as well. Could have sworn I tried stand alone or not with same results. I'l

#comport #fdm-duo #fdm-sw2 #wsjt-x #fldigi

Hi Patrick, you only get a CAT response if you send a CAT request to the USB CAT port in one of the modes where the DUO is in standalone or standalone plus 192kHz. As you suggest, SW2 does not use CAT

#comport #fdm-duo #fdm-sw2 #wsjt-x #fldigi

I've been doing a lot of research today, just trying to figure out the interaction of frequency and mode control between the DUO and the other devices. Here's what I've noticed using the VSPE monitor,

#comport #fdm-duo #fdm-sw2 #wsjt-x #fldigi