Date   
Re: Memory Error "Int32"

Joe Lanoue
 

I was able to edit the memory file in excel and that took care of the problem. A couple of aircraft channels that got corrupted.

Re: Memory Error "Int32"

Joe Lanoue
 

I'll give it a try.  Thanks Bill. 

Re: Memory Error "Int32"

Bill Nollman
 

Delete the memories file (shown in your screen shot) and restart SW2?

Bill

 

From: elad_sdr_en@... [mailto:elad_sdr_en@...]
Sent: Thursday, December 15, 2016 8:37 AM
To: elad_sdr_en@...
Subject: [elad_sdr_en] Memory Error "Int32"

 

 

While trying to edit the memory file in my FDM-S2 I messed something up and now when trying to save or edit anything I get the error popup shown below.  I suspect a software reinstall will be required. Any ideas?

 Thanks for any help.

..Joe (Cheshire CT)

Re: Memory Error "Int32"

Joe Lanoue
 

Appears my attachment didn't make it.  Here's another attempt. 
..Joe

Memory Error "Int32"

Joe Lanoue
 

While trying to edit the memory file in my FDM-S2 I messed something up and now when trying to save or edit anything I get the error popup shown below.  I suspect a software reinstall will be required. Any ideas?

 Thanks for any help.

..Joe (Cheshire CT)

Re: Two USB sockets needed?

Richard Brown
 

Yes, use the USB PS. The unit you mention sounds perfect. You will get very stable use from the Perseus with it. I've been running this way since i got my Perseus. It has never failed me. 

Rich Brown


On Wednesday, December 14, 2016 3:03 PM, "'Guido Schotmans' guidoschotmans@... [elad_sdr_en]" wrote:


 
Thanks very much Martin. And 2400 mA is incredible for only 7.99 Euros.  So it should also a good one for the Perseus is the voltage is stable and within the tolerance. I'll try it.
 
73,
 
Guido.


Van: elad_sdr_en@... [mailto:elad_sdr_en@...]
Verzonden: woensdag 14 december 2016 21:39
Aan: elad_sdr_en@...
Onderwerp: Re: [elad_sdr_en] Re: Two USB sockets needed?

 
Hi Guido -

The IKEA charger is called KOPPLA and the label states max 2400mA per outlet, max total load 3400mA.

3 USB outlets, appears to be noiseless on LF (haven't checked HF, never listen up there)

Made in China of course, but bigclive.com, who is an electrical engineer who does teardowns of Chinese stuff on Youtube, has looked at these and given it a thumbs up as far as build quality is concerned, and he's a pretty reliable and thorough critic.

If you Google "ikea koppla usb power supply" you'll see it.

Martin  GW3UCJ   Swansea.

*************************

> found it necessary - I have some very quiet switched mains
> USB power supplies ( sold by IKEA would you believe!) and if
> I have to, I'll use one of those.

That's interesting ! How many Amps are these able to deliver ?

73,

Guido.



No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7924 / Virus Database: 4739/13594 - Release Date: 12/14/16


v3_04 or v3_00 fll ?

Patrick <aunumero73@...>
 

Hi Group,

I posted this question on the ELAD facebook group a few weeks ago but got no reply ...

Could someone remind me when one should use v3_04 ExtIO dll instead of v3_00 ? I'm running the latter on my W8.1 64 bits laptop. Am I right ? Thanks ;-)

Patrick

Re: antennas on the Duo

Darwin Lambeth
 

Diito! Same question here. I only assumed  you just have one TX/RX connector and the other is receive only. 


On Wednesday, December 14, 2016 2:57 PM, "kd4zkb@... [elad_sdr_en]" wrote:


 
How do you change the antenna connection on the duo from 1 to 2 or 2 to 1 in the software in the two channel mode. I am missing something when I just want to change the connection. 


Re: Two USB sockets needed?

Guido Schotmans
 

Thanks very much Martin. And 2400 mA is incredible for only 7.99 Euros.  So it should also a good one for the Perseus is the voltage is stable and within the tolerance. I'll try it.
 
73,
 
Guido.


Van: elad_sdr_en@... [mailto:elad_sdr_en@...]
Verzonden: woensdag 14 december 2016 21:39
Aan: elad_sdr_en@...
Onderwerp: Re: [elad_sdr_en] Re: Two USB sockets needed?

 

Hi Guido -

The IKEA charger is called KOPPLA and the label states max 2400mA per outlet, max total load 3400mA.

3 USB outlets, appears to be noiseless on LF (haven't checked HF, never listen up there)

Made in China of course, but bigclive.com, who is an electrical engineer who does teardowns of Chinese stuff on Youtube, has looked at these and given it a thumbs up as far as build quality is concerned, and he's a pretty reliable and thorough critic.

If you Google "ikea koppla usb power supply" you'll see it.

Martin  GW3UCJ   Swansea.

*************************


> found it necessary - I have some very quiet switched mains
> USB power supplies ( sold by IKEA would you believe!) and if
> I have to, I'll use one of those.

That's interesting ! How many Amps are these able to deliver ?

73,

Guido.



No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7924 / Virus Database: 4739/13594 - Release Date: 12/14/16

antennas on the Duo

Kenneth Phillips
 

How do you change the antenna connection on the duo from 1 to 2 or 2 to 1 in the software in the two channel mode. I am missing something when I just want to change the connection. 

Re: Two USB sockets needed?

Martin Evans <books@...>
 

Hi Guido -

The IKEA charger is called KOPPLA and the label states max 2400mA per outlet, max total load 3400mA.

3 USB outlets, appears to be noiseless on LF (haven't checked HF, never listen up there)

Made in China of course, but bigclive.com, who is an electrical engineer who does teardowns of Chinese stuff on Youtube, has looked at these and given it a thumbs up as far as build quality is concerned, and he's a pretty reliable and thorough critic.

If you Google "ikea koppla usb power supply" you'll see it.

Martin� GW3UCJ�� Swansea.

*************************


> found it necessary - I have some very quiet switched mains
> USB power supplies ( sold by IKEA would you believe!) and if
> I have to, I'll use one of those.

That's interesting ! How many Amps are these able to deliver ?

73,

Guido.



Re: Christmas SW2 version

runahue@...
 

I am also having problems with remotectl and Omnirig Control.
FDM-SW2 is following my radio, but my radio is not following FDM-SW2.
Also Enable Split is not running correctly.

Using FDM-S2 under Windows 10 64 bits.

Re: Christmas SW2 version

Neil Smith G4DBN
 

I already had a profile saved, but I saved a SECOND profile, shut down, reloaded, and selected that profile.  I could then save changes without the crashes.  When I select the first profile again, it also allows me to save changes.  100% fixed.

Neil G4DBN

SW2 1.147, UI4.65, RX 1.31, TX 1.28, USB 4.08, FPGA2

Win10 Home 10.0.14393

Intel64 Family 6 Model 58 Stepping 9 GenuineIntel ~3401 Mhz


On 14/12/2016 18:38, runahue@... [elad_sdr_en] wrote:
 

1.147 is saving changes for me after upgrading from 1.144 and saving a profile.
My main problem with 1.147 is not saving IF Window position when using 2 monitors.





Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com


Re: Christmas SW2 version

runahue@...
 

1.147 is saving changes for me after upgrading from 1.144 and saving a profile.
My main problem with 1.147 is not saving IF Window position when using 2 monitors.

Re: Two USB sockets needed?

Guido Schotmans
 

the USB charger is not noisy. Typically switching type
chargers are noisy, and linear type are quieter. Switching
type chargers are cheaper to make. That does not necessarily
mean you will pay less for them.
The biggest problem is finding linear PSU's. I think they can only be found
in shops with a large old stock.

found it necessary - I have some very quiet switched mains
USB power supplies ( sold by IKEA would you believe!) and if
I have to, I'll use one of those.
That's interesting ! How many Amps are these able to deliver ?

73,

Guido.

Re: Two USB sockets needed?

Martin Evans <books@...>
 

Hi Rich - yes, the twin USB cable is the same, one thinner than the other. I was wondering if I could do as you say if I found it necessary - I have some very quiet switched mains USB power supplies ( sold by IKEA would you believe!) and if I have to, I'll use one of those.

Thanks for confirming that I can indeed do this.

Martin  GW3UCJ  Swansea.

***************************

 

 
If the same Y cable is being supplied currently, one side of the Y has a thinner cable. This side is for power supply only, not data and power, which the thicker side does. You can attach the thinner side to a plug-in wall wart type of USB charger, and then the thicker side into your one available computer port. This arrangement will work fine if the USB charger is not noisy. Typically switching type chargers are noisy, and linear type are quieter. Switching type chargers are cheaper to make. That does not necessarily mean you will pay less for them. With either type, you can mitigate noise somewhat with liberal use of snap-on ferrites on all cables. 

Sincerely, 
Rich Brown



Re: Two USB sockets needed?

Martin Evans <books@...>
 


Thanks David.

I'm fortunate in being able to use the very short USB cable supplied with the receiver so that shouldn't be a problem.

All I need now is to be left alone long enough to install it - work is the curse of the hobbied classes!

Martin� GW3UCJ� Swansea.

*********************

�



Both my Elads run happily from USB2 sockets (different computers), but you
need to take care. When I changed to a new computer, the PC failed to
recognise the radio. It took a long while to find, but the answer turned out
to be a simple one. I had used a USB extension lead with many turns through
a ferrite toroid to eliminate some common mode interference, and the voltage
drop down the cable was too much. A higher quality cable got everything
running correctly.
It seems a USB2 port is fine, but you need to watch for power losses in the
cable.

Best Wishes
David, GM8XBZ


Re: Two USB sockets needed?

Richard Brown
 

If the same Y cable is being supplied currently, one side of the Y has a thinner cable. This side is for power supply only, not data and power, which the thicker side does. You can attach the thinner side to a plug-in wall wart type of USB charger, and then the thicker side into your one available computer port. This arrangement will work fine if the USB charger is not noisy. Typically switching type chargers are noisy, and linear type are quieter. Switching type chargers are cheaper to make. That does not necessarily mean you will pay less for them. With either type, you can mitigate noise somewhat with liberal use of snap-on ferrites on all cables. 

Sincerely, 
Rich Brown



On Tuesday, December 13, 2016 9:30 AM, "th444de@... [elad_sdr_en]" wrote:


 
You can power it without problems from one USB 3.0 socket.
But you will need two USB 2.0 sockets and the Y cable if there is no USB 3.0 available.
73s, Henry

---In elad_sdr_en@..., wrote :

Do I need to use two USB sockets on my computer


Re: Two USB sockets needed?

david
 

Hi Martin,

Both my Elads run happily from USB2 sockets (different computers), but you
need to take care. When I changed to a new computer, the PC failed to
recognise the radio. It took a long while to find, but the answer turned out
to be a simple one. I had used a USB extension lead with many turns through
a ferrite toroid to eliminate some common mode interference, and the voltage
drop down the cable was too much. A higher quality cable got everything
running correctly.
It seems a USB2 port is fine, but you need to watch for power losses in the
cable.

Best Wishes
David, GM8XBZ

-----Original Message-----
From: elad_sdr_en@... [mailto:elad_sdr_en@...]
Sent: 14 December 2016 09:18
To: elad_sdr_en@...
Subject: Re: [elad_sdr_en] Re: Two USB sockets needed?






Henry & Tony - Thanks both.

I've only got USB2 sockets - and only one spare - so I'll take the risk.

Re: Two USB sockets needed?

Henry
 

Hihi. I think the recent mainboards are no longer as sensible as the old ones were. But the stories about killed laptop mainboards by external USB 2.0 harddrives several years ago shocked me and since that time I am careful.
Good luck
73s, Henry


---In elad_sdr_en@..., <books@...> wrote :

I've only got USB2 sockets - and only one spare - so I'll take the risk.
If I let out the magic smoke I'll come back and say that you were right all along, Henry.