The downconverter was installed this morning. There are two issues that need to be looked at. (1) the USBC cord is too stiff. (2) The two screws at the front of the down converter stick up too high ,

Hi Today when I turn on my equipment, it shows me this error, and can only be used in mode Offline. It has never happened in more than 8 years of use. How can I fix it, thanks for the help

What about Elad's requirement that the downconverter be installed by the factory?

Ron, They have not been advertised, you need to ask Vianney. There may been a problem with the USB port. The USB cable that come with the upgrade kit is very stiff so probably best advice is to

Everett, Thank-you for the information. Where was it advertised? I have seen nothing. And, since the USB port broke, is there a special way to dress the

Ron, With the current exchange rate it will cost you around $700 US and $50 shipping. I bought one about a month ago, but had to return it because the USB c port broke off of the downconverter

Vianney, Then, $800 US. Great! Thanks! -- Ron Hunsicker 1238 Cleveland Avenue Wyomissing, PA 19610-2102 United States of America

Hello Vianney, do you have any performance figures for the converter? The usual stuff, dynamic range, PN for various ranges, spurs etc? Regards Conrad PA5Y

For now, about 700€ + VAT. Regards, Vianney Il 27/11/2022 18:49, Ron Hunsicker via groups.io ha scritto: -- Vianney Colombat ELAD

The frequency range with the downconverter is 108MHz to 4.25GHz, without interruptions. Regards, Vianney Il 14/11/2022 08:37, AndersH via

Self install instructions are not in the user manual and are still present here. Apart the issues few customers have had installing downconverters (wrong screws, inverted wires, little

I gave up. DUO-ART remains in Italy and I got a $900 refund.

Thank you so much Vianney! Also thank you for the prompt answer. I really appreciate it. All is now working fine. Regards. George

Hello, try to uninstall the SW2 using the Windows App&Features (or Control Panel), next delete folders "C:\Program Files (x86)\ELAD\ELAD FDM-SW2" and "..\Documents\ELAD\FDM-SW2", then

I now see the Elad in the Device Manager. So how do I correct the error that is described in my original message? Thanks, George

Greetings, Last week, I received a ransomware attack and am having to rebuild my computer system. I have a new Drive C: installed with Win 10. I tried to install the software for my S2 , vers. 3.55.

Yes it works. I'm using it as the Ref in for an ETTUS Research N210. No problems. Terry

Still available 11/12/2022. 73' Ron ON2RON

Hello Chris, please open a support ticket here: http://support.eladit.com/open.php Regards, Vianney Il 07/12/2022 15:34, Chris Bartram ha scritto:

Thank you, Simon. Fortunately, I'd been planning to acquire second Duo for some time, and I managed to locate one on Dartmoor! All being well, I'll be picking that up