Perhaps you are all using external keyers with SW2? And nobody is using the built in keyer in the FDM-DUO? I assume there is no ideal solution for this?

Hi Simon! I've tried powered hubs, even a new USB-C hub with both USB2 and USB3 ports. My Winradio G33 doesn't have any trouble except at the 5Mhz bandwidth there is occasional crackle. So there is

Looking at buying one of these but info is sparse on them what im trying to figure out can you share say ant1 with 2 radios and ant2 with another, from what ive seen you can only share 1 ant to 1

Hi all, I use SW2 to control my FDM-DUO, and I want to have sidetone with I use CW. The problem is that I need to have "Mute RX on PTT" selected, so that I don't hear myself when TXing on SSB, etc.

I'm using this Audio connection. You pay for but once for a lifetime. https://www.g4zlp.co.uk/unified/DM_MiniPro_SC.htm Maybe it can be of help. Raimund .

Could be USB power issues. First try with a powered hub, 99% of the time this solves similar problems. Simon Brown https://g4eli.com https://sdr-radio.com

Hi, Don't obsess about the number of bits, there's nothing wrong with 14-bit ADCs, it's the linearity and firmware/software that matters. Why use USB3 when not needed? Simon

Hi All, I've just released version 1.83 of EladRemote here: https://www.eladit.com/en/download?path=sdr%2FDUO-ART_EladRemote%2F1.83 New features are: - Better management of cw "break-in" timings -

FDM-SW2 VERSION 3.55 on the radio: Menu 33 TXOUT 0dBm Menu 2 RX LP OFFFDMSW2SwSetup.xml: <LockFreqDUOt value="0" /> In SW2, the LPF checkbox is off.

Hi Dave, I faced a similar problem about a year ago while trying to connect ELAD S2 to new Asus (Intel chipset) and HP (AMD chipset) laptops. At a bandwidth above 768 kHz, artifacts appeared (missing

Easy answer. Use the old computers! Problems solved! Your welcome! de WB9DBD

Hello, I only provide some information: - the Perseus22 has an USB 3 controller (the same as the S3) and the Perseus has an USB 2 controller, - the choice for the ADC

I mostly use my G33DDC radios and have decided to sell my 2 ELAD S2 radios and go in a different direction with any new purchases. I would like $250 for each. Includes double filter USB cable and SMA

My S2 radio works fine on a few year old desktop and a 2nd gen I7 Toshiba laptop. However, the S2 is not happy with a new HP Envy 13 laptop. The audio continuously crackles when I start the radio

Ah ah, was not an accusation :-), just information sharing. By the way, this quick start guide is also available here as pdf document. Regards, Vianney Il

Vianney, Guilty, as charged and point taken: use the resources available to me. Thanks for being the schoolmaster, Ron

This command comes in handy every now and then. In a way, it is so important that it could be highlited at the top of this Quick Start Guide. Another case of window not showing up has happeded

For information, shortcuts are described in the quick-start guide: Regards, Vianney Il 25/10/2022 14:35, Ron Hunsicker via groups.io ha scritto:

Vianney, Wow! That fixed it! Thank-you! I will put a note in the Elad file with that fix. Ron -- Ron Hunsicker 1238

Does Ctrl+Alt+R (reset windows positions) change something ? Vianney Il 24/10/2022 23:10, Ron Hunsicker via groups.io ha scritto: --