Thanks Simon - appreciate your thoughts. Might reach out to Elad to see how much a replacement knob would be. Richard M0RGM

Hi Whatever paint you use .(and yes 2 pack would be good, but then you need spray gun, compressor and min order is 1.2 l in uk.. abit over kill.) But was getting at . BE very caretif removing old

I would recommend an epoxy-based paint (possibly a two-part) if your government allows it. It will withstand wear much better than regular enamel or lacquer-based paints. Wes KB6PR Get Outlook for

All, Would welcome your views. The silver paint on the indentation of my tuning knob has largely worn away. I'm considering repainting it, but before I do, has any one has success doing this and if

To remote control SW2 you can use TeamViewer, that let you control all the Windows PC running SW2. As previously said, to use ELAD Remote, the hardware and software used to communicate is built into

Hi Giovanni / ELAD, Is there any likelihood of an IP remote solution to control the FDM-DUO or FDM-SW2, that doesn't require the ART? Either as a hardware based add-on box, or a software based

Hi all, Is it possible to view SWR in the FMD-SW2 software? I am operating my FDM-DUO with FDM-SW2 remotely (via Splashtop Enterprise) and I really need to be able to monitor VSWR. I was

Hello Mike, well I am now 8 hours in with three instances of WSJT-X talking to the ELAD SW2 software, no time-out errors seen and I must say it is satisfying to see it all working as I had hoped it

Aha it was due to the filename length. This works. But indeed the timing is flaky. C:\flrig-1.4.5\flrig.exe --config-dir C:\flrig-1.4.5\S3_1 C:\flrig-1.4.5\flrig.exe --config-dir

C:\Users\"Conrad PA5Y"\Documents\flrig-1.4.5\flrig.exe --config dir C:\Users\"Conrad PA5Y"\Documents\flrig-1.4.5\S3_1 should work.  Windows uses the backslash for directory separators for ridiculous

I cannot delete the quotes, or rather I can but they are immediately restored. So given what you suggested I tried. "C:\Users\Conrad PA5Y\Documents\flrig-1.4.5\flrig.exe" –config-dir

You don't need any quotes. With what you have there it's treating whole thing as the path to an executable which it is not...therefore "not valid". At most you use quote around the path to the

Hello all At work today, as a test, I created 3 instances of Flrig without any issue. This is an example of what was in the target box C:\Users\nxf27317\Documents\flrig-1.4.5\flrig.exe

Sounds like the ELAD can't service the requests fast enough. Put this into a file called "hamlib_settings.json" and save it in each WSJT-X directory where WSJT-X.ini is stored. Default timeout for the

Hi Mike my reference to the "cannot service the request" is based on the fact that I can do a successful CAT test in WSJT-X on each of the 3 instances but then at random intervals each of the WSJT-X

What do you mean "cannot service the requests for status in a timely manner". Are you getting a timeout error? What rig setting are you using for the ELAD? Mike W9MDB

Hello Michael (W9MDB), The ports in use here are not splitters as I have seen others try to use when connecting logging programs, they are pairs of virtual com ports, much like you do for a virtual

I do not see any indication that theXmlrpc Client is connected. More tomorrow, time for zzzz Conrad From: EladSDR@groups.io <EladSDR@groups.io>On Behalf Of Conrad, PA5Y via

Ah I see, I will give that I try. Conrad From: EladSDR@groups.io <EladSDR@groups.io>On Behalf Of PF1JM via groups.io Sent: 11 May 2022 21:29 To: EladSDR@groups.io Subject: Re: [EladSDR] CAT

Not only that, you also need to change the default Xmlrpc port in Fldigi for each VRX Each transceiver, or in this case VRX, needs its own, unique port number. So if you have the default port number