In the record panel? I set them all to 1,120,000. I'm not entirely sure why you would set them differently. Sent: Thursday, February 24, 2022 9:22 AM To: EladSDR@groups.io Subject: Re: [EladSDR]

Hi Bill and Otso Many thanks for your info. I have set the LO frequency to 1120 kHz but what setting do I put on "Tune freq" John

That was a good guess, Bill. Now I remember that I had similar problems before I started to use the Profiles. Now I select the correct Profile (like "MW Band" or "FM Band") before pressing the red

John, If it is still happening can you please send a screen shot or both recording and playback? My guess would be that your LO is not set to midband (I use 1,120kHz). That has happened to me from

Hi, I moved to SW2 3.55 last week and I have been happy with the new features introduced. Especially, I like the possibility to now use the Station Memories window while playing back my recordings.

Hello, I doubt the problem is related to the version of SW2 you are using. While I am aldeady at 3.55, I have recorded the AM band using the 1.5 MHz bandwidth with each recent version of the

Hello,Chris, I am the FXpad's author but I can't shell It. I'm supposed to rewrite the software but I'm very busy right now. I also no longer have flexnet radios

Hi Guys Just updated my Elad FDM -S2 to version 3.52 and finding that it is not recording the whole AM band from 530 - 1710 kHz. It's stopping at about 1100 kHz for some reason. On the recording

Hi, I am looking for the FXpad software for PowerSDR, which was originally sold by Woodboxradio. I have seen, that the author Vittorio, IK4IRO, is a member of this group. Any tips on where to buy this

Thank you kind Sir Now I need to find a source for a female USB connection to replace the bad one. 73, Ed

On Sun, Feb 20, 2022 at 12:07 PM, Ed Rodriguez wrote: Hello, my T-Mate USB connector is faulty, its missing the plastic USB adapter an its not properly seated, a USB Cable does not seat at all,

Hello, my T-Mate USB connector is faulty, its missing the plastic USB adapter an its not properly seated, a USB Cable does not seat at all, and it tends to get lose or disconnected. Has anyone

Laptops are great for what they are designed for. They are not designed for hours long heavy duty high data rates in a super hot car. Heat is a problem with laptops. Their cooling is compromised in a

The jerking will be due to your USB connection, I know these problems, without a good USB 3.0 (3.1) port, your notebook doesn't stand a chance. Greetings Uwe

While we are sharing tips for best performance when using the S3 I thought I would share my recent discovery in the hopes that it will save someone else a lot of frustration. I use my S3 with a Lenovo

The view from here: - standalone operation may use some help. Specially the VFO encoder. - Shak cabling is only an annoyance when you set it up, and you get the rest with the duo art. - For

S3 needs an exclusive USB3 port for continuous operation, no other power consumers connected. For problems with unattended automatic start remote I recommend this:

Mine was a USB issue. WHen I first used my FDM-S3, I always used it with a USB 3 port on the front of my tower, because that was all i had left. I recently installed a USB 3 expansion card with 4

I have the FDM-DUOr but the same suddenly happened for me with SW2. In my case it seems to be a conflict with the Yealink USB Connector software which came with my new webcam. When it is running in

We really need to properly move on 1. Hardware. Fdm-duo is exellent rf. but poor interface. Need network or single usb (audio + cat) so can network or cut cables 3 to 1 2. a mac version. With mac