EladSDR@groups.io

Re: Using CAT with ELAD SW2 software

Dear all, Problem solved! Another day with studying the User manual and the FT-897D_Yaesu_official_CAT-Commands.pdf manual, and low-level experimenting (measuring the data-com with an digital scope,

By T.W.H. Fockens · #20117 ·

Laptop does not recognize FDM-DUO

It's been awhile since I've used my FDM-DUO. I now find that the software does not recognize the DUO. I have two cables USB connected: The CAT (near the on/off switch), and the RX on the opposite

By Chet Roberts · #20116 ·

Using CAT with ELAD SW2 software

Dear all, Does someone have experience with using the CAT from out of the SW software? I am trying to use the CAT protocol with the ELAD SW2 software. I use an FDM-S2, vs 1.3 Firmware 3.0, with SW2

By T.W.H. Fockens · #20115 ·

Re: Elad FDM-S3 suddenly has started freezing.....

I've had occasional freeze trouble with Console & RSPdx, but my S3 has been running 24/7 with Console now for weeks with no issues at all. Looks like a hw issue, but is it the SDR or the PC? --

By Bjarne Mjelde · #20114 ·

Re: Elad FDM-S3 suddenly has started freezing.....

I have a laptop USB3 connector that's a bit loose and I've seen that exact same thing on that port. Have you tried a different USB3 cable or connector? Bill From: EladSDR@groups.io

By Bill Nollman · #20113 ·

Elad FDM-S3 suddenly has started freezing.....

Hoping someone else in the group will have experienced what I am now experiencing with my S3 and have been able to remedy. It is starting to freeze randomly in both SDR Console and in SW2. The video

By DX Central - Loyd Van Horn (W4LVH) · #20112 ·

A bug in Colour Settings

Hello, I have played a bit with the colour settings now. As I mentioned earlier, I have often two instances of SW2 running at the same time while playing back my recordings. These are typically on

By Otso Ylönen · #20111 ·

Re: FDM-S3 as Panadapter

I've just installed SW2 and i have the same problem number 2. with my FTDX5000 and Omnirig. I'm using FDM-S2 on RX out connector. Tomorrow I'll test on IF mode.

By Amadeu - EA3OW <ea3ow@...> · #20110 ·

Re: Waterfall Display

Hi Bill I turned all of my equipment on, planning on taking a picture of the problem. I adjusted the Filter BW and restarted my computer. Now, everything on the waterfall is exactly like it is

By Fletcher, Jack · #20109 ·

Re: Waterfall Display

Can you show what it looks like with a screen shot? From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Fletcher, Jack via groups.io Sent: Wednesday, February 2, 2022 8:00 PM To:

By Bill Nollman · #20108 ·

Waterfall Display

Is there a way to adjust or recalibrate the waterfall? When the radio and the readout at the top of the waterfall are both showing the correct frequency, the waterfall display is off by about 5 to 6

By Fletcher, Jack · #20107 ·

Re: What is D-Res ?

thanks all... i assumed it was some sort of filter... will have to play with it a bit...

By Bob - W9ZV · #20106 ·

VS: [EladSDR] FDM-S3 & FDM-SW2 #fmd-s3

Switching between HF and VHF inputs is obviously possible, but switching between HF1 & HF2, which I believe you are interested in, is not, I am afraid. Thiis would be a great addition. If this

By Otso Ylönen · #20105 ·

FDM-S3 & FDM-SW2 #fmd-s3

Is there any way for timed and automatic, FDM-SW2 controlled switching between both antenna inputs on the S3?

By Willi Westrupp · #20104 ·

Re: SW2SMeter

Ciao Vittorio, Sorry to confirm these small glitches that some of random users are experiencing, but we all are really thankful for you to have created this really visually attractive plugin. Thank

By holmch66@... · #20103 ·

Re: SW2SMeter

I'm really sorry. As soon as I have time I will check what these problems are caused by. Vittorio ik4iro

By ik4iro · #20102 ·

Re: SW2SMeter

On 31/01/2022 20:06, holmch66@... wrote: Has the fault been reported to the author, Vittorio IK4IRO? It would probably help him to fault-find if folks could send the exact

By Neil Smith G4DBN · #20101 ·

Re: SW2SMeter

Hello all, SW2SMeter is a really nice and visually attractive add-on. I have it installed in addition to Win7 /Elad FDM-2 and latest FDM-SW2 software. Many thanks for the creator But yes, I can

By holmch66@... · #20100 ·

SW2SMeter

Occasionally, the SW2SMeter locks up with a message that there is insufficient memory. Usually it occurs after I have walked away from the computer and come back hours later, often the next morning.

By Ron Hunsicker · #20099 ·

Re: What is D-Res ?

Unless the guys at Elad did change something, that D-res filter is an IIR fiter, with two complex conjugate poles that you can bring as close as you want to the unitary circle.

By Alberto I2PHD · #20098 ·

Messages