Hi there, I am getting this code when I try to run my new FDM-S3 on my computer. I am running the latest version of Windows 10 on a laptop that is only a few months old. It has USB-3 etc. and I am

Vianney hello Yes, with Lenovo G580 as before, there are no problems. I've tried cables of different lengths, but they work on Lenovo without any problem. On Asus, the problem remained intractable in

Hello, coming back to the Lenovo computer, have you no issue as before ? Are you using the same usb cable with both computer ? What happens if you use another usb cable, maybe

I use Spectrum Lab to get milliHertz or finer resolution on the audio stream from my DUO. The IF waterfall in 192 kHz with the DUO is 2.9 Hz per bin. Using Spectrum Lab with an FFT length

Span is not the same as resolution. Now, an option with resolution on the order of 1 Hz (spectrum & WF) really would be something for carrier offset detection/measurement!

I forgot to mention that the IF SPECTRUM window span can be reduced to 187Hz. Pete

Fernando For me the IF SPECTRUM window for each receiver gives a nice hi resolution 48.0kHz wide FFT. Pete

Thank you Elad italy for the fast delivery of the Filters. :-) Regards Fernando

Hi, One thing that I miss in the SW2 is the possibility to set the FFT Resolution. Or have I overlooked this possibility for years? Regards Fernando

There were some threads about this issue with the new codecs last year, might be worth searching the EladSDR archive. Neil G4DBN

You need a receiver that can decode the latest xHE-AAC audio format. I'm not sure if the Elad does that yet. KiwiSDRs do. 73 Chris

I'm trying to listen to a station on 25M transmitting in DRM (Radio Nacional da Amazonia on 11910 kHz). I can see the text messages from the station in the DRM info pop-up, but don't hear any

Yes, as I said, it shows to within 1dB the level I put into the -Duo. Tested at 20MHz, but there's no reason it should be wildly different at other frequencies. Andy www.g4jnt.com

Thank you for the suggestions. It confirms that my Duo is not performing correctly as you both report the rig to be stable. Andy, does your Duo indicate the level correctly from a signal generator?

Has anyone had experience of this please. Power up on 40m. Inject a signal into either ant port at a level of -73dbm S9. S meter reads S7 -80dbm or sometimes S6. After a short time S meter drops to S2

Agreed I always use it standalone, and display power level rather than S value. Always found, at least with a carrier, its within a dB accuracy and always stable. Can't say the same for noise

Hi Not that i tend to inject a signal into my duo..but its rock stable compared to the ftdx3000 it’s running with.. May I suggest..(feel free to shoot me down here) but a dodgy lead from sig

Has anyone experience with this problem please. I feed a S9 -73dbm signal into either ant port on the FDM-DUO and the S meter on the Duo and FDM software reads from S6 to S7. The level changes after a

Hello, we have not planned a release date yet. We will take stock on this development next month. Regards, Vianney Le informazioni contenute in questo messaggio di posta elettronica sono

Hi Mike, I suppose you should wait until the weekend is over. 73 Francesco, IN3XZP