Officially they have one more important filter to add to the design, Franco is working on that, final testing next week and the production will start. The factory is on vacation till next week and

During a last phone call to Elad, when I ordered a 60m band filter, they said me it will be available probably the end of January. A bit of patience is necessary. :-) 73 Francesco, IN3XZP

That would also interest me, Elad cannot deliver the devices it promised and even emails are only answered hesitantly, as a customer you then look for other devices. Sad something ... Greetings Uwe

Amen brother Pete

Hello! As I could see in previous messages, the S3 downconverter would be available until the end of the year. Yes, I understand the pandemic situation and the Elad is not a big company like Kenwood,

The HR50 should have 817 mode set to NO as well as KX3 serial NO and set On the main menu Key set to PTT. On the Elad I have TUNE PTT set to no, but that is the only PTT setting I know of. I have it

After some trial and tribulation, I succeeded in getting my headset to plug into the radio and actually work. It would seem the wiring solution that I chose for the connection to the RJ45 connector

That is exactly what I did and I get an error... I was surprised that I received an error. I'm wondering if there is a setting in either the DUO or the HR50 that needs to be set.

You can make a cable with RCA connector for the PPT JACK on the hard Rock and a 1/8 " plug with a stereo plug in the PTT JACK with only a connection to the tip and ground. Leave the ring connection

I did use a stereo cable. I've ordered the interface from HobbyPCB, just wondering if I could rig something up in the meantime. Thanks. Mark

Did you use a stereo cable between the FDM-DUO and the Hard rock? A better way is to use the interface that Hobby PCB sells, that will allow the HR50 to band change automatically with the

I hooked up my Hardrock 50 amplifier (DUO RTX/TX PL-259 connection to HR RF IN and DUO PTT to HR50 PTT) but I get a "DEMOD Error" when I press PTT or tap my cw key. Does anyone have success in

That worked. Thank you. Mark WU6R

Note that the spectrum display is still centered on the hardware receiver. If you do as Neil says it unlocks Rx1 (virtual receiver) from the spectrum display. RX1 now reacts as all the other virtual

Try clicking the FDM-DUO icon at top left, then uncheck the mode of duo = mode of RX1 button, then uncheck Lock to CF above the waterfall. I haven't tested what happens on TX, but it appears to work

How do I lock the waterfall and spectrum so that when I turn the VFO and move up and down the frequency band that my VFO frequency scrolls instead of the waterfall and spectrum

Bill, Yes, I did.. did a fresh install from the stick that came with the S3. I'll uninstall and try again. On 26/12/2020 21:40, Bill Nollman wrote:

Did you install the “Complete” .zip 113MiB version such as v3.037. 3_037_FDM-SW2_Complete.zip - http://eladit.com/download/sdr/FDM-sw2%20Software/Current%20release/index.php?lang=EN Or did

Evening all, Trying to run SW2 on a spare laptop and I am getting an error: ************** Exception Text ************** System.IO.FileNotFoundException: Could not

To Vianney and the whole team at ELAD: Many thanks for your great products, your support and your continuous efforts in improving them (FW/SW updates) and listening to us as