This procedure should work : uninstall the SW2 software from "Apps and Features" or from the "Control Panel", delete the folder "ELAD FDM-SW2" under "C:\Program Files

Thank you Morris and Klaus. Happy New Year to all ! Vianney Il 24/12/2020 16:43, Klaus Brosche ha scritto: Le informazioni contenute in questo messaggio

I had searched the list for this but didnt try the right terms, I guess ui 04.87 fga 02.00 usb 04.09 rx 01.50 tx 01.35 Not quite currrent so I will update and reset. Im sure that one of those things

I have also seen this happen with my radio (FDM DUO). I reset the duo and it is gone for the rest of the day. I see this usually from cold start when the radio is started with turning on the radio

There have been a few threads on this before, see https://groups.io/g/EladSDR/message/13131 for instance. What firmware versions are you using? Does the decrement stop after a reboot,

As the subject suggests, my duo has started randomly decrementing its frequency in whatever steps the dial is set for. There does not seem to be any consistency to it and might be 10 minutes or so

@Paul EladUSA @Francesco, IN3XZP Thank you for the information. We have shown patience, nice to know that something is going on and that there is a schedule, I hope that the many ELAD friends

Officially they have one more important filter to add to the design, Franco is working on that, final testing next week and the production will start. The factory is on vacation till next week and

During a last phone call to Elad, when I ordered a 60m band filter, they said me it will be available probably the end of January. A bit of patience is necessary. :-) 73 Francesco, IN3XZP

That would also interest me, Elad cannot deliver the devices it promised and even emails are only answered hesitantly, as a customer you then look for other devices. Sad something ... Greetings Uwe

Amen brother Pete

Hello! As I could see in previous messages, the S3 downconverter would be available until the end of the year. Yes, I understand the pandemic situation and the Elad is not a big company like Kenwood,

The HR50 should have 817 mode set to NO as well as KX3 serial NO and set On the main menu Key set to PTT. On the Elad I have TUNE PTT set to no, but that is the only PTT setting I know of. I have it

After some trial and tribulation, I succeeded in getting my headset to plug into the radio and actually work. It would seem the wiring solution that I chose for the connection to the RJ45 connector

That is exactly what I did and I get an error... I was surprised that I received an error. I'm wondering if there is a setting in either the DUO or the HR50 that needs to be set.

You can make a cable with RCA connector for the PPT JACK on the hard Rock and a 1/8 " plug with a stereo plug in the PTT JACK with only a connection to the tip and ground. Leave the ring connection

I did use a stereo cable. I've ordered the interface from HobbyPCB, just wondering if I could rig something up in the meantime. Thanks. Mark

Did you use a stereo cable between the FDM-DUO and the Hard rock? A better way is to use the interface that Hobby PCB sells, that will allow the HR50 to band change automatically with the

I hooked up my Hardrock 50 amplifier (DUO RTX/TX PL-259 connection to HR RF IN and DUO PTT to HR50 PTT) but I get a "DEMOD Error" when I press PTT or tap my cw key. Does anyone have success in

That worked. Thank you. Mark WU6R