That's normal Boot up Sequence. It's needed for Remote Control to be sure, the Art and the Duo are connected. The Art is used for Remote Control and you can't press any Buttons if you are miles away

Neil and Raimund Thanks for your comments. I decided to try Raimund"s suggestion first since I already had SW2 on the taskbar. If I right-click the SW2 icon on the taskbar then right-click the ELAD

OK, thank you both for the information. I will try to play with this later tonight and see if there are any improvements to be had. I was not listening with the computer, only with the headset

Jim, pls open the Windows "application bar" at the Desktop Bottom. (Right Mouse-click on a free space) Control the various selections if active or not! And... Move the SW2 Icon to the taskbar. -

David, QSK with the Duo. One – don’t monitor using the computer audio, the delays will make sending almost impossible. Monitor the radio output directly with headphones or powered

I am using the DUO-ART amplifier with the FDM-DUO radio. The radio gets its DC power from the amplifier. When I turn the amplifier on the radio comes on, then turns off, and then turns back on again.

Does anyone have experience, knowledge, or ideas about how best to reduce the amount of fan noise in the amplifier? Thanks and 73, Jim AJ8S

Hi David, I've never found a good solution to QSK on the DUO. I've tried messing with injecting sidetone into an outboard audio mixer to get around the latency of the sidetone in SW2, but it

If you create a new shortcut, or browse to the folder "C:\Program Files (x86)\ELAD\ELAD FDM-SW2" you can run FDM-SW2.exe as administrator. The .lnk shortcut created by the installer doesn't

I can run any other app as "Administrator" just not SW2. Jim - KC4JNW

I am still new to this radio. In general, I have found two issues. No VOX and no QSK. The VOX I can deal with for now but trying to emulate QSK is a problem. I have set the CW delay to a very

Fabio, puoi scaricarlo da qui: http://sdr.eladit.com/FDM-sw2%20Software/Auxiliary%20software/SW2SMeter%20Plugin%20by%20IK4IRO/index.php?lang=EN

Buonasera a tutti, vi chiedo gentilmente dove poter scaricare il relativo software, in quanto non più disponibile sulle pagine suggerite in passato. Grazie a tutti. 73's Iw7egy Fabio

Buonasera a tutti, vi chiedo gentilmente dove poter scaricare il relativo software, in quanto non più disponibile sulle pagine suggerite in passato. Grazie a tutti. 73's Iw7egy Fabio

I am new at this, so please bear with me. I just got an FDM-DUO and the ART amplifier. I have hooked it up as the diagram showed except for any USB cables to a computer. I can get the amp and

Probably no help to you, but I can run it as admin on my machine here. On 14/12/2020 18:40, Jim Fuller wrote:

Klaus: Only Windows Defender Jim - KC4JNW

Any Anti-Virus software running? Klaus, DK3QN Am 14.12.2020 um 19:40 schrieb Jim Fuller:

Windows 10 Home 64 bit SW2 3.0.37 Based on my efforts to integrate SW2 and Log4OM V2, I believe I need to run SW2 as an administrator. 1. If I right-click the SW2 desktop icon "Run as Administrator"

Thanks Paul, I'll give it a try. Regards, Dennis W7DRW 73