Thanks Andy, I must have missed an announcement about the site change. It looks like the shop section is still being worked on. Neil G4DBN The old site can still be found at the

It's elad.it Andy, DF4WC Am 14.08.20, 21:16 schrieb "MM6IXE via groups.io" <sota@...>:

It’s been like that for a while for me Iain

I can't reach sdr.eladit.com or any of the variants other than shop.eladit.com, have I missed a maintenance notice, or is there a fault? Neil http://g4dbn.uk

What IS this IQ mode that can be set by the CAT IQ command m? Is it to the internal soundcard, and if so, what advantage does if offer over normal single audio channel ? What bandwidth is available,

Hi David, when I built a 4 phases example I fed I/Q in L/R audio using stock audio block in Gnuradio. Only thing to remember is to launch periodically the CAT command allowing audio as I/Q. No idea of

Hi All, I do some math supposing that ssb modulator is based on hilbert transformer. With little information available and my calculation may be possible that maximum input level is 0.4-0.5 in order

Thank you for accept my request to join the group. I am waiting for the availability of the S3. 73s Francesco Di Giovanni - IN3XZP Get Outlook for Android

To all people interested, I've made a first attempt to compile in win32 using mingw. As aspected portmidi is there and it seems to exists a port of pthreads. But no hope with termio (for now) so, at

Hi All, attached you can find the last version of the program. Using -i switch you can "program" the interface: move a command then input the field requested, using the keyboard and following the

Hi All, attached is a tarball with a working version also with jog "query". When the operator is turning jog after a certain period of inactivity the program send a query CAT command to know the value

Hi All I agree with Andy 88db of dynamic are still extremely good. I suspect that this reduced dynamics depend how the internal modulator is implemented. I'm doing some math..I will show my

http://www.intrasystem.it/Frequency/Frequency.html Intrasystem Raimund .

It's not a lot of dynamic range loss really. If the maximum value for the soundcard input is +/- 13000 out of 32768, that's still 14 bits worth of dynamic range (actually 14.6 bits if you can get

Thanks Andy, That was my original understanding, so many thanks for the clarification. I think I went into brain fart mode - probably as the result of excessive plumbing and tiling!

Hi Andy I think we need some feedback from elad team or some comment on this result. Maybe also i2phd or Giovanni HB9EIK can help Regards David IW5BNL

NO NO NO Chris The 0dBm output is linear up to 0dBm output in analogue / RF terms What we're talking about is the digital drive word to the internal soundcard in order to get that signal level. It

Hello Andy, I'm just starting to think about connecting the 0dBm output of my FDM-DUO to my transverters. I'm a little unclear about the results you have reported - it's probably

Hi Andy, I have exactly same result. This morning I generate a full scale 1500khz tone and the point of output power saturation is achieved adjusting audio level at-7.8 db. This means that the wait

Sri Folks Looks like a BIG correction is needed. I've just done a quick test using the pre-recorded .WAV files and it's as you suggested. Full output from the 0dBm port is achieved with, in my case,