Does the TX cutout last for about two seconds Mark? I had a problem on this PC and it was related to a specific USB card. The audio on TX would stop for two seconds, then just carry on as

While relatively new, 3 months, to the FDM-DUO, I have used WSJT-X for several years with both FLEX and ANAN hardware. I am now noticing a problem with TX in that it will cut off during TX

Hi Barry, how does it behave when running with SW2 at various bandwidths? How about on different computers? What about when you remove all other USB devices temporarily? Is there any

Hello group, I've rejoined the group to get help with my Elad S2. It didn't have much sensitivity, and some sections of HF seemed to not have any input signal. Using SDR-Console 3.0.19 the radio would

Thanks, guys. All good now. 73 Mark KK2L

Up and down arrows Neil G4DBN

To the left of the frequency is the LOCK and SNAP buttons. To the left of that it says “Step 10.0kHz” in white letters. Click on the white letters and use your up and down arrows to change the

Greetings All, This is a noobie question. How do I adjust step tuning using the SW-2 software? I know how to make this adjustment in stand alone mode. 73 Mark KK2L

The connection between RadioFrequency and SW2 now includes: OmniRig, TCP, SerialPort for: S1, S2, S3, DUOr (SerialPort) The problem is that I don't own the DUOr. Is there anyone who can help with a

Maybe elad can also change the DRM decoding to decode audio and journaline at the same time when they implement the xHE-AAc codec. .BBC has TX with audio + journaline. With dream you can listen to the

Elad will need to add xHE-AAC decoding to the SW2 software. I don't believe it has it yet. It is more than just a new .dll, but not much. The KiwiSDR developers have done this and the source is

Hi all How update or obtain a codec xHE-AAC to demoduled a DRM transmission with use this codec for FDM-SW2 ? Recently Radio Marti from usagm test DRM using this codec but not`s possible listen the

I checked things with the calibrated osc etc and the attenuation is 30+dB when the attenuator comes in. I checked on the RL bridge and the match degrades too. Looks like the two upper boards need to

Hi Mike, I was able to find out info on the FDM-S2 RX that your selling for $250.00. Will you be sending the USB cables, software, etc. ? Please send me a detail PayPal Invoice for

Without converter it’s 10khz-54mhz plus 78-136mhz currently, and yes the Extio dlls will be available

Hi Paul, Two questions: What is the frequency coverage without the converter? Do the extio dlls work with this so that it can be used with other SDR software besides SDRC and SW2? Thanks Tony

Description --- WIDEBAND DIRECT SAMPLING RECEIVER ---- JAN 2020 SPECIFICATIONS 2 switchable HF Antenna inputs direct sampling 1 VHF Antenna input direct sampling Works with FDM-SW2 ELAD Software

Vianny, I can adjust the speed of the waterfall with the Refresh Time Interval setting. With this setting, I can set waterfall speeds between 2 seconds and Fastest. When I burned up Q14, I also

All: I need to fix and upgrade some antennas so unfortunately am going to sell my ELAD FDM Duo which is in like new condition. Below is copy of ad I posted in QRZ. FS: ELAD FDM Duo. Very nice

The subject says it all. VoA is currently using this mode for DRM test transmissions from Greenville. Is it possible (with sufficient signal strength) to decode the data/audio with an ELAD receiver