Hi Arthur, there are different step sizes on my scroll wheel depending on where I operate the mouse wheel. If I am on the lowest bar on the display, it steps 25kHz, on the next

I suggest you should set the DUO to full power, then set the slider in WSJT-X to provide the actual power you need. I am using the 0dBm output into transverters and I set the level so I

Hi Arthur Not sure if it is what you want, but the arrow keys normally change the tuning step. The actual keys depend on the configuration selected on the "Tuning" Setup page. I use Up/Down for step

Thanks for your reply. Ok, so that drop is what I should aim for?

In theory, 100% on WSJT slider should give 100% on the DUO. You can check that by reducing the WSJT slider to -3dB or -6dB and checking the output power drops by half or 3/4 Neil

Thanks, Neil. Had menu 54 correctly set. Changed PTT method to RTS and that works, even when testing CAT and PTT from the Settings. Thanks! Forgot to ask: how do you determine correct audio drive

Are you using the dedicated FDM-DUO Hamlib facility? The TS480 Hamlib functions have a serious timing bug. Can you try using RTS for PTT instead of CAT, and change menu 54 to PTT+RTS?

Hello group. Can someone using a Mac with Sierra please tell me how they have configured WSJT-X to work with the Elad FDM-DUO? I can get audio in and see all traffic both on the waterfall and in the

Howdy Arthur, I'm not sure if you're wanting to totally disable the effect (don't know how to do that). However, changing the effect is easy. First, it depends on where you are on the interface. Let's

Question how does one stop the mouse wheel scrolling 10 kHz at a time. Arthur

Brand new (never used). Thanks...Joe

Yes, version 11.20... I just went through all the rigamarole again with no success. Always results in the autobaud error. Is there any other way of getting this update installed. I'm not able to

Wow! Where is that posted? Guess I could have avoided my disaster if it was clear. I follow version nomenclature carefullu: 1.002; 1.003, 1.0-04.....1.10, 1.15.....1.2! Maybe I am too old fashioned!

I am having a difficult time trying to set the Tuner manually any straight forward instructions out there. Thanks KK4X/W1 Newport Rhode Island

Yes, 1.2 is the same thing as 1.002. See https://groups.io/g/EladSDR/message/14394?p=,,,20,0,0,0::relevance,,charles,20,2,0,29002628 Le informazioni contenute in questo messaggio di posta

Are you sure that you have the 11.20 version? http://www.flashmagictool.com/download.html&d=11.20/FlashMagic.exe I had the same problem and until I un-installed the 12.01

I tested both versions of Flash Magic to no avail. I even loaded older USB Serial drivers on the computer as suggested at FlashMagic, but that didn't change anything either. What now? Thanks...

I think 1.2 is actually the same thing as 1.002, but don't quote me on that. These things always happen just before the weekend. Neil On 12/04/2019 18:31, Charles

Vianney, the ELAD website says the firmware version is 1.2. I only have 1.002 so I must ipgrade. Neil, Thanks. Worked like a charm. But, DISASTER. I followed the manuals step by step and upgraded the

a small update here the flatcable may be defective if I put it in the fdm s2, I already get the error message without the preselector being connected ?