been using 3.019 for a long time, now i was just trying the Markers and despite them being enabled, they seem to do nothing and will not display whats the trick to getting them working? toggling

Thanks, Neil. What a complete list of things to check! I did all as you suggested. My Audio IN was set to Microphone (FDM-DUO Audio...) I changed it to Line, like yours. It did not work; get the

Not a worthwhile effort unless ELAD is serious about developing the promised remote capability that was supposed to appear with ART-120. Over the past year in this forum I've repeated asked about

Hi Guillermo, can you confirm what you see in the AUDIO IN and WAVE OUT boxes? Mine look like this: The -1 error is probably an uninitialised value, or something in

When I try to turn FDM-DUO Advanced TX on, I get a Warning window that says: Start Warning: -1, with an OK button that when clicked blanks out (dissapears) the On/Off button on the Adv. TX window.

Hi Patrick, just to muddy the pool a bit more, I use C on a PIC to send CAT commands and parse the output stream. Others like Andy use a PIC with assembler. Apart from working out how to

Hi Giovanni, excellent points. Also to Ed (WD4ED) who also had excellent points. There's no wrong answer with either approach, just pluses and minuses in each and I thank you both for the views. While

I had to uninstall SW2 completely, then ran CCleaner and reinstalled using your #2 instruction and all worked perfectly. Now have to check that the rest works OK. Thank you Bill.

I can’t say I’ve ever had a problem installed SW2 but two questions. 1. Are you installing it in the default installation folder (you took at the default settings)? 2. Are you running

Hello group. I am installing SW2 on a new Windows 10 PC which has all the updates. Both the full and the upgrade installed software fail with a .NET problem, always the same. Appreciate any

Hello Otso, I have the same problem here with the IQ recordings. I already stopped with the overnight IQ recordings of the MW band. 50% of the recording files have 0 kb. 73, John

Otso and Bill, i started SW2. I'm using the FDM-S2 Receiver. Using Windows 10 64bit and my Monitor is a HP 27 inch Using update 3.019 i see the yellow and read button light perfectly and the

One more thing. Take a look at the Release Notes for FDM-SW2 and search for the word “record” - http://sdr.eladit.com/FDM-sw2%20Software/SW2%20v3.019%20release%20notes%20(EN).txt You will see that

Otso, it may help to know that you are not alone in having failed manual and automatic recordings. I have reported it many times and ELAD has made improvements over the years but unfortunately

Hi Otso pls. state what is your: - Windows platform - Win7, Win10 ecc... - Monitor, name + size Could be of help for understanding better x who is replaying. Raimund .

Hi, While I am a happy user of three FDM-2 receivers, I have had this recurring error with SW2 since I got my first FDM-2 in 2015. My current SW2 version is 3.023. When I press the record button

Hi David, I'm working on a complex project now, but I'm willing to make some upgrading of the GNUradio blocks. Mainly the runtime frequency control has been drop when I introduced the ability to use

Hi Ed, do not apologize, two answers are better than one :-) I mainly agree with you, the only problem is that, if you whish to use EXTIO, you cannot simple send/receive CAT commands, because of the

Hi Patrick, if you plan to make some simple controls, you can find Arduino ligther and simpler to adopt. If you use buttons only to send commands, as NB level or band change, or mode, this solution is

Apologies as this was not directed to me. But I have done several of my own arduino projects interfacing Arduino to cat interfaces. Mainly Yaesu and Kenwood. One project was to do nothing more than