Should work perfectly well Jim, the program just sends the usual F 14xxxxxx Hamlib call when it goes to transmit in Fake It mode, then another one when it goes back to receive.  That will set your TX

The reason I asked was that I got a response from T31EU while he was in F/H mode this morning but could not complete the QSO. If you start up F/H mode with none selected for split you get an error

Hi Paul, I don't have another PC running windows to check if FDM-S2 I will run on it, but I am pretty certain my current computer is OK as I can run several other devices via USB connections with no

Hi Jim, I haven't seen any of the discussions about F/H, but I can confirm that "Fake It" works fine with the new FDM-DUO Hamlib in WSJT-X when running split for low transmit tones in FT8.  That

I have read many of the previous threads about not being able to work in F/H mode with the TS480 selected as the radio in WSJT-X. Now since the DUO is a individual selection on the radio tab of WSJT-X

Allen, check also the "Auto-start demodulation" setting, maybe it is unchecked. Il 20/02/2019 02:55, Paul Jones ha scritto: Mail priva di

Allen, Have you tried a different PC just in case it’s the USB controller on the PC, if not where are you located so we can check it out? Have a Radiolutionary Day! Paul -- Paul Jones -

A few weeks ago, I started FDM-SW2 program to run my FDM-S2 but "Go" button is grayed out. I have always had issues with poor USB connection on back of the unit but usually re-positioning the cable

Hardware - FDM DUO and ART. Software - Windows 10, SW2 ver 3.019 I believe I have some sort of setup issue between the DUO and SW2 that I haven't been able to figure out. From SW2 main screen I can

Standard Edition x Framework 4+ Now the RadioFrequency_S program x FrameWork 3.5 (Win 7) is ready x download. Raimund .

Bonjour Vianney Je viens d’exécuter la procédure que vous m’avez envoyé par mail Tout est rentré dans l’ordre Il me reste maintenant à faire la mise a jour de mon”DUO ART 120 et

Bonsoir Jean-Marie, vous devez activer manuellement le mode de reprogrammation en utilisant le bouton fait exprés. Je colle ci dessous un extrait du mode d'emploi de la MAJ firmware. Aprés

BONJOUR LORS DE LA MISE A JOUR DE MON FDM DUO RUBRIQUE USER INTERFACE J AI EU UN PROBLEME REFUS DE MISE A JOUR DEPUIS LORSQUE J ALLUME MON TX J AI UN ECRAN NOIR ET PLUS DE COMMUNICATION EXISTE T IL

I am handling the disposal of a friends (SK) radio equipment and one of the items is a black FDM-Duo I have the original box and the three A-B USB leads he used, I cannot find the original micro USB

Otso, you're right, when running more than one instance under the same user account, only the settings related to the FDM devices (the xml files with the serial number) are managed separately.

This brings to my mind a wild idea which would allow “syncing” of IQ files made with different receivers at the same time, for example with antennas pointing to different directions. When playing

Further to this... SDR Console will also allow you, subject to hardware/ resources, to run multiple SDRs, including multiple Elads, at the same time. I have two S2s which run

Jan, check the new menu 59, set it to "returns previous mode after transmission". Vianney Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne

You can use more than one FDM devices with the same user account without problem, using the same (and the only one) installation of the FDM-SW2 software. I regularly run two FDM-DUOs, two FDM-S2 and

Yes, you can run these parallel. I have three FDM-2:s and run the under Windows 10 side-by-side, covering a good part of the FM broadcast band. I actually run them from one single directory/folder