Willi, the RadioFrequency + RadioFrequency_S program have a automatic "Locator" Calculator already integrated. In that case you could get the the Frequency data together with the "Distance" x Km + nm

Thank you Willi, this is helping me a lot for integrating the MWList. Raimund .

Raimund, please note that MWList offers an important function for mediumwave DX: The list can take into account the listener's location: For each frequency the entries are sorted by the expected

Hi Otso, 1) i will check the MWLIST.org to verify if there is a possibility to download the data. If yes there is no difficult to translate those data into any different data-Structure. In this case

Hi . I personally don't miss station tags in my IF window in SW2, but I would really enjoy to have 1Hz resolution or better. MW offsets is becoming a mainstream part of the hobby, I think that's a

Thank you Raimund. This seems like a better way than trying to view the offsets on the SW2 IF screen, which gets crowded immediately with only couple of close-by stations. Have you ore someone else

USA customers ONLY I have a refurb demo DuoART 120 with ATU save $150 off regular price... FULLY WORKING/FULL WARRANTY

Giovanni, Thank you for the detailed reply. I was concerned that the network connection was provided with no thought given to security concerns. Your reply shows me that that is not the case and that

Hi Otso, RadioFrequency is connecting to FDM-S1/S2/DUO. Raimund .

Hi Mark, Franco asked me to answer you, since I'm working on the security and networking aspects. The DuoArt uses the RJ 45 wired Ethernet, and no WiFi connection. On the RJ45 there are two TCP on

Hello Giovanni First of all : Happy 2019 ! and the difference between the DUOr and the Blueduo app are gone! Thank you very much With kind regards Han Hardonk Benelux DX Club member

Hello Raimund, Would RadioFrequency work with the FDM-2 as well? I have a few of those, no Duo. BR, Otso Lähettäjä: Raimund Lähetetty: perjantai 4. tammikuuta 2019 17.08 Vastaanottaja:

Hi Otso, Obviously the labels are very close together with many Stations within a small range of frequencies. You should organize your station in a more professional way. You can use my Freeware

Hi Han, could you test if the new 0.23 version solves this problem ? You can download from: www.eladit.com/download/sdr/BLUEDUO/BlueDuo-0.23-2019-01-04.apk Thanks for the report, Giovanni - HB9EIK

Rob: THANK YOU!! Marc WB9DBD

Hello, I have used the great resource from MWLIST, https://www.mwlist.org/mwoffset.php, in trying to identify broadcast stations based on their exact carrier frequencies. Using ELAD SW2, I would

Unfortunally for AMD CPU's there is no firmware available so you have to use the 3 listed loaders.

thanks again Mark I like the all red setup Best wishes Rob G3RCE

Hello Franco many thanks for your info inc plot. I do use the Duo-Art in the ssb position most of the time. My amp was purchased from Martin Lynch on 1st December 2018, serial number SJO9UL so I

Robert, please go to Menu 65 Fan Control and set SSB mode that switch on the fans only when threshold will be triggered. High Performance mode switch on the fan at every PTT switched on. Duo Art is