Date   

Re: FDM-S2 and Windows 10

the_shamen@...
 

@Anthony...

mmm Win 10
I'm sure MS enjoyed the experience of listening in also :p


Re: DUO Mic ID??

jan jellema
 

no labels


Re: I had a dream...

on2ron@...
 

So nobody uses a powerpack with his DUO on a field trip that can comment on the QRM question I guess. I almost can't imagine that.

73' Ron
ON2RON


Re: FDM-S2 and Windows 10

on2ron@...
 

I have had no problems with W7,8 or 10. Only in the first official release of W10/64 there was a tiny audio problem that was later resolved. This was depending on the audio chips of the MB.

73' Ron
ON2RON


Re: DUO Mic ID??

on2ron@...
 

It was written by Elad at the time that the Icom microphones are compatible with the DUO. There are changeover cables available from Icom to match a round plug to a RJ45 type so you do not have to make your own. They are of good quality.

A friend has very good comments on the transmit audio quality with his Icom SM-30 desktop mike.

73' Ron
ON2RON


VS: Aw: Re: FDM-S2 and Windows 10

Otso Ylönen
 

Thanks Carl.

 

I know many others, if not everyone else , can run the multiple channels fine without problems under Win 10. There is something peculiar with my laptop. Under Win 7 Ibhavw no trouble with two Elad SW2 applicatios using eight RX channels, two eternal USB audiocards, a UHD display etc…

 

BR, Otso

 

Lähetetty Windows 10 -puhelimesta

 

Lähettäjä: physics1@... [elad_sdr_en]
Lähetetty: torstaina 2. kesäkuuta 2016 1.36
Vastaanottaja: elad_sdr_en@...
Aihe: Re: Aw: [elad_sdr_en] Re: FDM-S2 and Windows 10

 

 

Otso,
I set up two windows. On stays on the dx frequency and doesn't change. The ch2 windows is tunable over the wall of people calling the dx station and controls the ftdx3000 transmit frequency. 1st window on left channel and 2nd window on right channel. I take the audio from the computer and run it to powered speaker. I can redily hear both windows.
Computer is as follows:
Asus rog maximum viii hero motherboard
Chip is intel i7 6700 @ 4.2ghz
64 gigs ram
Nved 1200gps ssd
Windows 10 pro
Carl K0YCR

 


Re: FDM-S2 and Windows 10

Stan Horzepa
 

Thanks, Tony.

Stan, WA1LOU


On 6/1/16 9:15 PM, Anthony Casorso canthony15@... [elad_sdr_en] wrote:
�

I run Windows 10 on an old Core2 quad desktop with realtek audio on an GigaByte motherboard with 8GB ram.

I just ran all 4 receivers in SW2 at the same time with no difficulty. Thats one for W10.

Tony



To: elad_sdr_en@...
From: elad_sdr_en@...
Date: Wed, 1 Jun 2016 05:26:41 -0700
Subject: [elad_sdr_en] FDM-S2 and Windows 10

�

I bought an FDM-S2 at Hamvention and plan to run it from my Mac OS X laptop using Parallels and some version of Windows. Since I have to buy Windows, I was wondering if the FDM-S2 software is good to go with Windows 10 or should I use Windows 7 or 8?


Thank-you,


Stan, WA1LOU






Re: FDM-S2 and Windows 10

Tony_AD0VC
 

I run Windows 10 on an old Core2 quad desktop with realtek audio on an GigaByte motherboard with 8GB ram.

I just ran all 4 receivers in SW2 at the same time with no difficulty. Thats one for W10.

Tony



To: elad_sdr_en@...
From: elad_sdr_en@...
Date: Wed, 1 Jun 2016 05:26:41 -0700
Subject: [elad_sdr_en] FDM-S2 and Windows 10

 

I bought an FDM-S2 at Hamvention and plan to run it from my Mac OS X laptop using Parallels and some version of Windows. Since I have to buy Windows, I was wondering if the FDM-S2 software is good to go with Windows 10 or should I use Windows 7 or 8?


Thank-you,


Stan, WA1LOU





Re: DUO Mic ID??

vk3meg steve <vk3meg@...>
 

no they are very plain but an icom should work fine with the elad.
cheers
steve
vk3meg

On Thu, Jun 2, 2016 at 7:20 AM, jack.nelson@... [elad_sdr_en] <elad_sdr_en@...> wrote:
 

Good afternoon to all. Forgive me for a stupid question....YES, there are some. I can't seem to find the mic that came with my DUO that I purchased about a year ago. I've gone through my box of hand mics, and all have "icom, kenwood, elecraft" etc. Does the ELAD mic have a name or any identifying feature, other than the RJ-45 connector?


Thanks for your time.

Jack K5FSE
Cumming, GA
Treasurer, QRP ARCI




Re: FDM-S2 and Windows 10

carl watterson
 

Otso,
I set up two windows. On stays on the dx frequency and doesn't change. The ch2 windows is tunable over the wall of people calling the dx station and controls the ftdx3000 transmit frequency. 1st window on left channel and 2nd window on right channel. I take the audio from the computer and run it to powered speaker. I can redily hear both windows.
Computer is as follows:
Asus rog maximum viii hero motherboard
Chip is intel i7 6700 @ 4.2ghz
64 gigs ram
Nved 1200gps ssd
Windows 10 pro
Carl K0YCR


DUO Mic ID??

Jack Nelson
 

Good afternoon to all. Forgive me for a stupid question....YES, there are some. I can't seem to find the mic that came with my DUO that I purchased about a year ago. I've gone through my box of hand mics, and all have "icom, kenwood, elecraft" etc. Does the ELAD mic have a name or any identifying feature, other than the RJ-45 connector?


Thanks for your time.

Jack K5FSE
Cumming, GA
Treasurer, QRP ARCI



Re: FDM-S2 and Windows 10

Stan Horzepa
 

Thank you, Alan. I own a couple of top-of-the-line-for-their-time Mac laptops and will be checking their specs tonight.

Stan, WA1LOU


On 6/1/2016 3:42 PM, alanskerker@... [elad_sdr_en] wrote:
 

Stan,

If your laptop is at least Mid 2012 you should be able to run FDM with Windows 8.1 or 10 under Parallels or Bootcamp; if earlier, then you may be able to get 7 to work. I have two older Mac laptops that I was hoping to repurpose for FDM; however, after checking specs found that neither met the RAM requirements for Parallels with Windows and in the case of Bootcamp, the Windows support software from Apple was no longer available for either machine, so a dive into your laptop specs if you have not already done that could save you some frustration. Luckily, I found a used HP laptop running Vista Home and FDM seems quite happy under this system. 


Re: FDM-S2 and Windows 10

alanskerker@...
 

Stan,
If your laptop is at least Mid 2012 you should be able to run FDM with Windows 8.1 or 10 under Parallels or Bootcamp; if earlier, then you may be able to get 7 to work. I have two older Mac laptops that I was hoping to repurpose for FDM; however, after checking specs found that neither met the RAM requirements for Parallels with Windows and in the case of Bootcamp, the Windows support software from Apple was no longer available for either machine, so a dive into your laptop specs if you have not already done that could save you some frustration. Luckily, I found a used HP laptop running Vista Home and FDM seems quite happy under this system. 


Re: BlueDUO

Wolf
 

Hi Giovanni!

Now that I updated RX and TX everything is working, Thank you for your help!

A lot to play with!!!!

73 Wolfgang

Am 29.05.2016 um 12:40 schrieb gfranza@... [elad_sdr_en]:
 

Hi Wolfgang,
I fear that I've missed the RX Demodulator version from the release notes, so I suggest you
to upgrade at least your
RX Demodulator and (maybe) your FPGA.
Please upgrade RX Demodulator to 1.29 and your FPGA to 2.0.
Please let me know if this solves the problem.
Regards

Giovanni HB9EIK



---In elad_sdr_en@..., <123@...> wrote :

Hi Giovanni!

I have checked twice what the Status Release postulates (as from your link):

RX Demodulator: 1.29 (I have 1.25)
TX Modulator: 1.27 (I have 1.24)
If I need the latest TX Modualtor and RX Demodulator - the Release Notes show no neccesarity for that!

I have User interface: 04.58 as demanded and things should therefore work.

Either the PDFs are wrong or my ELAD is damaged?!

As said, that the APK needs the UI 04.58: I have it! (Reinstalled on this Wednesday form the website!)

What now?

73 Wolfgang






-- 


Re: FDM-S2 and Windows 10

Stan Horzepa
 

Thank you, Otso!


On 6/1/2016 11:23 AM, 'Otso Ylonen' otso.ylonen@... [elad_sdr_en] wrote:
 
Hi
I have a rather powerful Asus ROG G750jw gaming laptop as basis of my DX studio. I ended up having both Win 7 and 10 on it as a dual-boot setup. The reason is that there is something, apparently in the Realted audio drivers under Win 10, that makes it impossible to use multiple virtual receivers (RX1, 2, 3, 4) at the same time. The audio starts to stutter very badly. I have updated all drivers and hardware related sw components I have found with no remedy. Therefore, I run Elad SW2 only under Windows 7. Otherwise, I would prefer 10.
 
I have no experience about Win 8 or 8.1 with Elad.
 
BR, Otso
 
Gesendet: Mittwoch, 01. Juni 2016 um 16:30 Uhr
Von: "stanzepa@... [elad_sdr_en]"
An: elad_sdr_en@...
Betreff: [elad_sdr_en] Re: FDM-S2 and Windows 10
 

Thank you, Carl.



Re: FDM-S2 and Windows 10

Otso Ylönen
 

Hi
I have a rather powerful Asus ROG G750jw gaming laptop as basis of my DX studio. I ended up having both Win 7 and 10 on it as a dual-boot setup. The reason is that there is something, apparently in the Realted audio drivers under Win 10, that makes it impossible to use multiple virtual receivers (RX1, 2, 3, 4) at the same time. The audio starts to stutter very badly. I have updated all drivers and hardware related sw components I have found with no remedy. Therefore, I run Elad SW2 only under Windows 7. Otherwise, I would prefer 10.
 
I have no experience about Win 8 or 8.1 with Elad.
 
BR, Otso
 
Gesendet: Mittwoch, 01. Juni 2016 um 16:30 Uhr
Von: "stanzepa@... [elad_sdr_en]"
An: elad_sdr_en@...
Betreff: [elad_sdr_en] Re: FDM-S2 and Windows 10
 

Thank you, Carl.


Re: FDM-S2 and Windows 10

Stan Horzepa
 

Thank you, Carl.


Re: FDM-S2 and Windows 10

carl watterson
 

Stan,
I am using an I7-6700 windows machine with windows 10 pro. The FDM-S2 software seems to run
just fine. I am also successfully using HRD, FLDIGI, N1MM, MMTTY, MRP40.
Windows 10 is not challenged by ham radio software. However, you will find it represents a 
learning curve.
Carl K0YCR


---In elad_sdr_en@..., <stanzepa@...> wrote :

I bought an FDM-S2 at Hamvention and plan to run it from my Mac OS X laptop using Parallels and some version of Windows. Since I have to buy Windows, I was wondering if the FDM-S2 software is good to go with Windows 10 or should I use Windows 7 or 8?


Thank-you,


Stan, WA1LOU




FDM-S2 and Windows 10

Stan Horzepa
 

I bought an FDM-S2 at Hamvention and plan to run it from my Mac OS X laptop using Parallels and some version of Windows. Since I have to buy Windows, I was wondering if the FDM-S2 software is good to go with Windows 10 or should I use Windows 7 or 8?


Thank-you,


Stan, WA1LOU




Re: Stereo Split

Neil Smith G4DBN
 

My audio settings look like this:

Neil G4DBN

Virus-free. www.avast.com

10681 - 10700 of 20301