Date   

Re: FDM-SW2 Delay in executing commands

Bill Nollman
 

Hans,

Check here...
SETtings / Audio Tab / Look at the lower right corner "Soundcard Play Buffer
Size (ms)" = 300ms.
I believe that being set to a higher value could have the effect you
mention. The default is 300ms.

Also, are you using Bluetooth headphones or speaker? Those can sometimes
cause a slight delay, no fault of the S3.

Are you using any Virtual Audio cable software? While I've never heard a 2
second delay I've had plenty of odd effects (echo is my biggest issue) which
I'm convinced are either Windows 10 or VAC issues. Luckily those are usually
fixed by closing and re-opening SW2 or rebooting the PC. I've even had
distorted audio that only went away when the Sound control panel icon was
open on the Desktop. Windows, so much fun!

Bill Nollman
Farmington, CT

-----Original Message-----
From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Hans-Juergen Karius
Sent: Thursday, January 27, 2022 9:28 AM
To: ELAD <EladSDR@groups.io>
Subject: [EladSDR] FDM-SW2 Delay in executing commands

Hallo all,

When I operate the FDM-SW2 software + the FDM-S3 receiver I observe a
remarkable delay in executing commands.

For example:
When I listen to a ham radio station in LSB on the 80m band and change the
frequency to listen to another station in LSB on the 80m band I can count to
appr. 2 until I hear the new station. That is about 2 seconds.
Of course I do not have exact mesurements but my feeling for time tells me
it is so long.

And I have the feeling that with the new FDM-SW 3.53 software version this
delay has become a bit longer than before.

Is there a setting within the FDM-SW2 software that I have overlooked?
Have others made the same experience?
My Win10 desktop PC is a kind of Porsche type.

Thank you for your ideas and 73.

Hans, DL4YBP


Re: FDM-SW2 Delay in executing commands

Wily
 

Porche 356 1948. :-)

----- Original Message -----
From: Hans-Juergen Karius <h.j.karius@...>
Reply-To: <EladSDR@groups.io>
To: ELAD <EladSDR@groups.io>
Sent: 27.01.2022 16:27:54
Subject: [EladSDR] FDM-SW2 Delay in executing commands
________________________________________________________________________________


Hallo all,

When I operate the FDM-SW2 software + the FDM-S3 receiver I
observe a remarkable delay in executing commands.

For example:
When I listen to a ham radio station in LSB on the 80m band and change
the frequency to listen to another station in LSB on the 80m band I can
count to appr. 2 until I hear the new station. That is about 2 seconds.
Of course I do not have exact mesurements but my feeling for time tells
me it is so long.

And I have the feeling that with the new FDM-SW 3.53 software version this
delay has become a bit longer than before.

Is there a setting within the FDM-SW2 software that I have overlooked?
Have others made the same experience?
My Win10 desktop PC is a kind of Porsche type.

Thank you for your ideas and 73.

Hans, DL4YBP


FDM-SW2 Delay in executing commands

Hans-Juergen Karius
 

Hallo all,

When I operate the FDM-SW2 software + the FDM-S3 receiver I
observe a remarkable delay in executing commands.

For example:
When I listen to a ham radio station in LSB on the 80m band and change
the frequency to listen to another station in LSB on the 80m band I can
count to appr. 2 until I hear the new station. That is about 2 seconds.
Of course I do not have exact mesurements but my feeling for time tells
me it is so long.

And I have the feeling that with the new FDM-SW 3.53 software version this
delay has become a bit longer than before.

Is there a setting within the FDM-SW2 software that I have overlooked?
Have others made the same experience?
My Win10 desktop PC is a kind of Porsche type.

Thank you for your ideas and 73.

Hans, DL4YBP


looking for ART 120

SW1JGW
 

Dear friends hello and happy new year
Im looking forward to a DUO ART 120 . I prefer from EU but if is not its not a problem
thank you



Re: Update SW2

Bill Nollman
 

I appreciate the work required to make changes and I understand wanting
matching VRX colors across windows. I also understand that having a setting
for everything becomes unreasonable. But I do hope that the RDS window text
color (PI Code and Radio Text) can be set back to white.



Suggestion, on the Graphics Tab add a 4th check box in the lower right
similar to the others that says "Apply VRX Color to RDS Text"?



Thank You!

Bill



From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Wednesday, January 26, 2022 3:35 AM
To: EladSDR@groups.io
Subject: Re: [EladSDR] Update SW2



Hi,

I would not say the colour on RDS text looks terrible, but certainly it
takes some getting used to. A setting would be great. Perhaps also for the
RDS background colour.



***



About the new colour settings: I really like the possibility to make
different profiles really distinct with the background colour! I often have
couple of SW2 instances playing back recordings made with different antennas
at the same time. This helps me differentiate which is which.









BR, Otso

Gesendet: Mittwoch, 26. Januar 2022 um 02:43 Uhr
Von: "Bill Nollman" <billct97@... <mailto:billct97@...> >
An: EladSDR@groups.io <mailto:EladSDR@groups.io>
Betreff: Re: [EladSDR] Update SW2

Just got home from a long weekend away (with my S3, of course) and installed
v3.54 and the Filter BW direct entry works again. Thank you!



I see that now the RDS window text color now matches the color of the RX and
the frequency. This is not good. Could there be a SETting that allow the RDS
window text to remain white and not match the RX and frequency color? I
didn't see a way to revert back to how it used to be in the new Color
Settings. I'm happy with RX1 and the frequency being red, as it always has
been, but the RDS text looks terrible being any color besides white.



Thanks,

Bill



From: EladSDR@groups.io <mailto:EladSDR@groups.io> <EladSDR@groups.io
<mailto:EladSDR@groups.io> > On Behalf Of Morris G1PIB via
groups.io
Sent: Tuesday, January 25, 2022 7:59 AM
To: EladSDR@groups.io <mailto:EladSDR@groups.io>
Subject: [EladSDR] Update SW2



For all interested in the notch entry anomaly . v3.54 has rectified this
plus a few other bugs..so enjoy
available for download now.
Thanks Elad..

Morris ..g1pib ...cold Somerset


Re: Update SW2

Otso Ylönen
 

Hi,
I would not say the colour on RDS text looks terrible, but certainly it takes some getting used to. A setting would be great. Perhaps also for the RDS background colour.
 
***
 
About the new colour settings: I really like the possibility to make different profiles really distinct with the background colour! I often have couple of SW2 instances playing back recordings made with different antennas at the same time. This helps me differentiate which is which.
 
 
 
BR, Otso
Gesendet: Mittwoch, 26. Januar 2022 um 02:43 Uhr
Von: "Bill Nollman" <billct97@...>
An: EladSDR@groups.io
Betreff: Re: [EladSDR] Update SW2
Just got home from a long weekend away (with my S3, of course) and installed
v3.54 and the Filter BW direct entry works again. Thank you!



I see that now the RDS window text color now matches the color of the RX and
the frequency. This is not good. Could there be a SETting that allow the RDS
window text to remain white and not match the RX and frequency color? I
didn't see a way to revert back to how it used to be in the new Color
Settings. I'm happy with RX1 and the frequency being red, as it always has
been, but the RDS text looks terrible being any color besides white.



Thanks,

Bill



From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Morris G1PIB via
groups.io
Sent: Tuesday, January 25, 2022 7:59 AM
To: EladSDR@groups.io
Subject: [EladSDR] Update SW2



For all interested in the notch entry anomaly . v3.54 has rectified this
plus a few other bugs..so enjoy
available for download now.
Thanks Elad..

Morris ..g1pib ...cold Somerset







 


Re: Update SW2

Bill Nollman
 

Just got home from a long weekend away (with my S3, of course) and installed
v3.54 and the Filter BW direct entry works again. Thank you!



I see that now the RDS window text color now matches the color of the RX and
the frequency. This is not good. Could there be a SETting that allow the RDS
window text to remain white and not match the RX and frequency color? I
didn't see a way to revert back to how it used to be in the new Color
Settings. I'm happy with RX1 and the frequency being red, as it always has
been, but the RDS text looks terrible being any color besides white.



Thanks,

Bill



From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Morris G1PIB via
groups.io
Sent: Tuesday, January 25, 2022 7:59 AM
To: EladSDR@groups.io
Subject: [EladSDR] Update SW2



For all interested in the notch entry anomaly . v3.54 has rectified this
plus a few other bugs..so enjoy
available for download now.
Thanks Elad..

Morris ..g1pib ...cold Somerset


Re: FDM-SW2 Update

Bill Nollman
 

For what it’s worth I don’t have a connect S2 or S3 at home where I play back most recordings.

Bill
 


From: EladSDR@groups.io <EladSDR@groups.io> on behalf of Otso Ylönen <otso.ylonen@...>
Sent: Tuesday, January 25, 2022 10:21 AM
To: eladsdr@groups.io
Subject: Re: Re: VS: [EladSDR] FDM-SW2 Update
 
I suppose there are no technical reason to have the RX connected for either of these functions. I really hope at least the memories will be made available without the RX.

In current implementation, the Station Memories window should not even come up in offline mode!

Especially in my battery powered AM QTH I have to be very conscious about power consumption. If I listen to recordings there, I will not have any of my receivers on. On the other hand, when I listen to these recordings back home, I find it unnecessary to plug in a receiver, as I do not have proper antennas here.

BR, Otso
--
Sent from my Android phone with GMX Mail. Please excuse my brevity.
On 25.1.2022, 15.45 Vianney Colombat <vianney@...> wrote:

Ok, this is the problem. EQ and MEM tuning during OFFLINE mode (no FDM connected) are disabled now.

Will see what can be done.

Vianney

Il 25/01/2022 09:54, Otso Ylönen ha scritto:

Hello,

 

Yes, when playing back, I am normally offline, and without a receiver connected to the Computer at all.

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: tiistai 25. tammikuuta 2022 8.44
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Otso, when you play back, you are in ONLINE mode or OFFLINE mode ? I.e. you run the SW2 with the GO button or with the OFFLINE button ?

Regards,

Vianney

Il 24/01/2022 17:14, Otso Ylönen ha scritto:

Thanks Vianney! Number entry to BW and filter fields work as expected now.

 

Regarding Station Memories, clicking on the rows on the list (see my earlier post) does nothing but changes the mode as I am playing back 1.5 MHz MW recordings and trying to jump to another MW frequency using the Station Memories window. During playback, the whole 1.5 MHz range is displayed, therefore, I do not think ”I am tuning outside of the displayed span”, right? I must be doing something wrong if no-one else has this problem!

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: maanantai 24. tammikuuta 2022 14.10
Vastaanottaja: EladSDR@groups.io
Aihe: Re: VS: [EladSDR] FDM-SW2 Update

 


Version 3.54 should fix the issues on Notches and Filter BW.

Some information:
    - for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
    - it is not possible to tune outside the span displayed during a playback,
    - the equalizer is disabled in OFFLINE mode.

Regards, and thank you for your comments,

Vianney


Il 22/01/2022 18:40, Otso Ylönen ha scritto:

Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.

 

As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.

 

 

 

I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Bill Nollman
Lähetetty: lauantai 22. tammikuuta 2022 16.39
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 

Sorry to report another (possible) v3.53 bug.

  1. I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
  2. The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).

 

Is anyone else having the same problem? I was using v3.50 before this update with no problem.

 

Bill Nollman

Farmington, CT

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Friday, January 21, 2022 5:16 PM
To: EladSDR@groups.io
Subject: VS: [EladSDR] FDM-SW2 Update

 

Hi Vianney,

 

I have done some testing already:

  1. I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
  2. The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
  3. I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts
  4. I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
  5. It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional  filters!
  6. The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out
  7. Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!

 

Thank you for your continued work on this great piece of software!

BR, Otso

 

 

I  have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: perjantai 21. tammikuuta 2022 13.53
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Hello,

the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.

The most important changes are:
    - possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
    - added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
    - improved keyboard shortcuts management (with addition of new shortcuts),
    - added the possibility to use the memories even when playing a file,

    - improved software stability for the S3.

Regards,

Vianney

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

 

--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 


--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Remote not working #fmd-s2

Tomasz K
 

Hello everyone
I am having trouble starting the remote control on my elad fdm-s2.  I have everything set as in the description but it does not work.  The server is running, the software will set the same port as the server, the software stops working and I have to restart it.  When I want to start the browser, messages pop up like the picture below.  I had the same problem on the second computer.  Please help.


Re: VS: [EladSDR] FDM-SW2 Update

Otso Ylönen
 

I suppose there are no technical reason to have the RX connected for either of these functions. I really hope at least the memories will be made available without the RX.

In current implementation, the Station Memories window should not even come up in offline mode!

Especially in my battery powered AM QTH I have to be very conscious about power consumption. If I listen to recordings there, I will not have any of my receivers on. On the other hand, when I listen to these recordings back home, I find it unnecessary to plug in a receiver, as I do not have proper antennas here.

BR, Otso
--
Sent from my Android phone with GMX Mail. Please excuse my brevity.

On 25.1.2022, 15.45 Vianney Colombat <vianney@...> wrote:

Ok, this is the problem. EQ and MEM tuning during OFFLINE mode (no FDM connected) are disabled now.

Will see what can be done.

Vianney

Il 25/01/2022 09:54, Otso Ylönen ha scritto:

Hello,

 

Yes, when playing back, I am normally offline, and without a receiver connected to the Computer at all.

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: tiistai 25. tammikuuta 2022 8.44
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Otso, when you play back, you are in ONLINE mode or OFFLINE mode ? I.e. you run the SW2 with the GO button or with the OFFLINE button ?

Regards,

Vianney

Il 24/01/2022 17:14, Otso Ylönen ha scritto:

Thanks Vianney! Number entry to BW and filter fields work as expected now.

 

Regarding Station Memories, clicking on the rows on the list (see my earlier post) does nothing but changes the mode as I am playing back 1.5 MHz MW recordings and trying to jump to another MW frequency using the Station Memories window. During playback, the whole 1.5 MHz range is displayed, therefore, I do not think ”I am tuning outside of the displayed span”, right? I must be doing something wrong if no-one else has this problem!

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: maanantai 24. tammikuuta 2022 14.10
Vastaanottaja: EladSDR@groups.io
Aihe: Re: VS: [EladSDR] FDM-SW2 Update

 


Version 3.54 should fix the issues on Notches and Filter BW.

Some information:
    - for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
    - it is not possible to tune outside the span displayed during a playback,
    - the equalizer is disabled in OFFLINE mode.

Regards, and thank you for your comments,

Vianney


Il 22/01/2022 18:40, Otso Ylönen ha scritto:

Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.

 

As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.

 

 

 

I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Bill Nollman
Lähetetty: lauantai 22. tammikuuta 2022 16.39
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 

Sorry to report another (possible) v3.53 bug.

  1. I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
  2. The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).

 

Is anyone else having the same problem? I was using v3.50 before this update with no problem.

 

Bill Nollman

Farmington, CT

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Friday, January 21, 2022 5:16 PM
To: EladSDR@groups.io
Subject: VS: [EladSDR] FDM-SW2 Update

 

Hi Vianney,

 

I have done some testing already:

  1. I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
  2. The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
  3. I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
  4. I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
  5. It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional  filters!
  6. The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
  7. Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!

 

Thank you for your continued work on this great piece of software!

BR, Otso

 

 

I  have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: perjantai 21. tammikuuta 2022 13.53
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Hello,

the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.

The most important changes are:
    - possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
    - added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
    - improved keyboard shortcuts management (with addition of new shortcuts),
    - added the possibility to use the memories even when playing a file,

    - improved software stability for the S3.

Regards,

Vianney

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

 

--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 


--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Re: FDM-SW2 Update

Francesco Di Giovanni
 

Hi Vianney,
that would be acceptable.

73
Francesco, IN3XZP


FDM-SW2 Update - EIBI List problem

Rafael Rodriguez
 

I installed version 3.53 but I have a problem with the display of the station memory under the EIBI list, despite applying it it does not show it on the screen on default lablesl ot display level. In the previous version there was an OK button before applying it that no longer exists.

For the help, thanks


Rafael Rodriguez R.
Bogotá, Colombia


Re: VS: [EladSDR] FDM-SW2 Update

Vianney Colombat
 


Ok, this is the problem. EQ and MEM tuning during OFFLINE mode (no FDM connected) are disabled now.

Will see what can be done.

Vianney

Il 25/01/2022 09:54, Otso Ylönen ha scritto:

Hello,

 

Yes, when playing back, I am normally offline, and without a receiver connected to the Computer at all.

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: tiistai 25. tammikuuta 2022 8.44
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Otso, when you play back, you are in ONLINE mode or OFFLINE mode ? I.e. you run the SW2 with the GO button or with the OFFLINE button ?

Regards,

Vianney

Il 24/01/2022 17:14, Otso Ylönen ha scritto:

Thanks Vianney! Number entry to BW and filter fields work as expected now.

 

Regarding Station Memories, clicking on the rows on the list (see my earlier post) does nothing but changes the mode as I am playing back 1.5 MHz MW recordings and trying to jump to another MW frequency using the Station Memories window. During playback, the whole 1.5 MHz range is displayed, therefore, I do not think ”I am tuning outside of the displayed span”, right? I must be doing something wrong if no-one else has this problem!

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: maanantai 24. tammikuuta 2022 14.10
Vastaanottaja: EladSDR@groups.io
Aihe: Re: VS: [EladSDR] FDM-SW2 Update

 


Version 3.54 should fix the issues on Notches and Filter BW.

Some information:
    - for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
    - it is not possible to tune outside the span displayed during a playback,
    - the equalizer is disabled in OFFLINE mode.

Regards, and thank you for your comments,

Vianney


Il 22/01/2022 18:40, Otso Ylönen ha scritto:

Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.

 

As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.

 

 

 

I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Bill Nollman
Lähetetty: lauantai 22. tammikuuta 2022 16.39
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 

Sorry to report another (possible) v3.53 bug.

  1. I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
  2. The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).

 

Is anyone else having the same problem? I was using v3.50 before this update with no problem.

 

Bill Nollman

Farmington, CT

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Friday, January 21, 2022 5:16 PM
To: EladSDR@groups.io
Subject: VS: [EladSDR] FDM-SW2 Update

 

Hi Vianney,

 

I have done some testing already:

  1. I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
  2. The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
  3. I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
  4. I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
  5. It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional  filters!
  6. The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
  7. Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!

 

Thank you for your continued work on this great piece of software!

BR, Otso

 

 

I  have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: perjantai 21. tammikuuta 2022 13.53
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Hello,

the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.

The most important changes are:
    - possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
    - added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
    - improved keyboard shortcuts management (with addition of new shortcuts),
    - added the possibility to use the memories even when playing a file,

    - improved software stability for the S3.

Regards,

Vianney

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

 

--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 


--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Update SW2

Morris G1PIB
 

For all interested in the notch entry anomaly . v3.54 has rectified this plus a few other bugs..so enjoy
available for download now.
Thanks Elad..

Morris ..g1pib   ...cold Somerset


VS: [EladSDR] FDM-SW2 Update

Otso Ylönen
 

Hello,

 

Yes, when playing back, I am normally offline, and without a receiver connected to the Computer at all.

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: tiistai 25. tammikuuta 2022 8.44
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Otso, when you play back, you are in ONLINE mode or OFFLINE mode ? I.e. you run the SW2 with the GO button or with the OFFLINE button ?

Regards,

Vianney

Il 24/01/2022 17:14, Otso Ylönen ha scritto:

Thanks Vianney! Number entry to BW and filter fields work as expected now.

 

Regarding Station Memories, clicking on the rows on the list (see my earlier post) does nothing but changes the mode as I am playing back 1.5 MHz MW recordings and trying to jump to another MW frequency using the Station Memories window. During playback, the whole 1.5 MHz range is displayed, therefore, I do not think ”I am tuning outside of the displayed span”, right? I must be doing something wrong if no-one else has this problem!

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: maanantai 24. tammikuuta 2022 14.10
Vastaanottaja: EladSDR@groups.io
Aihe: Re: VS: [EladSDR] FDM-SW2 Update

 


Version 3.54 should fix the issues on Notches and Filter BW.

Some information:
    - for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
    - it is not possible to tune outside the span displayed during a playback,
    - the equalizer is disabled in OFFLINE mode.

Regards, and thank you for your comments,

Vianney


Il 22/01/2022 18:40, Otso Ylönen ha scritto:

Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.

 

As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.

 

 

 

I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Bill Nollman
Lähetetty: lauantai 22. tammikuuta 2022 16.39
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 

Sorry to report another (possible) v3.53 bug.

  1. I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
  2. The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).

 

Is anyone else having the same problem? I was using v3.50 before this update with no problem.

 

Bill Nollman

Farmington, CT

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Friday, January 21, 2022 5:16 PM
To: EladSDR@groups.io
Subject: VS: [EladSDR] FDM-SW2 Update

 

Hi Vianney,

 

I have done some testing already:

  1. I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
  2. The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
  3. I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
  4. I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
  5. It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional  filters!
  6. The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
  7. Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!

 

Thank you for your continued work on this great piece of software!

BR, Otso

 

 

I  have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: perjantai 21. tammikuuta 2022 13.53
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Hello,

the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.

The most important changes are:
    - possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
    - added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
    - improved keyboard shortcuts management (with addition of new shortcuts),
    - added the possibility to use the memories even when playing a file,

    - improved software stability for the S3.

Regards,

Vianney

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

 

--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 


Re: FDM-SW2 Update

Vianney Colombat
 


Otso, when you play back, you are in ONLINE mode or OFFLINE mode ? I.e. you run the SW2 with the GO button or with the OFFLINE button ?

Regards,

Vianney


Il 24/01/2022 17:14, Otso Ylönen ha scritto:

Thanks Vianney! Number entry to BW and filter fields work as expected now.

 

Regarding Station Memories, clicking on the rows on the list (see my earlier post) does nothing but changes the mode as I am playing back 1.5 MHz MW recordings and trying to jump to another MW frequency using the Station Memories window. During playback, the whole 1.5 MHz range is displayed, therefore, I do not think ”I am tuning outside of the displayed span”, right? I must be doing something wrong if no-one else has this problem!

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: maanantai 24. tammikuuta 2022 14.10
Vastaanottaja: EladSDR@groups.io
Aihe: Re: VS: [EladSDR] FDM-SW2 Update

 


Version 3.54 should fix the issues on Notches and Filter BW.

Some information:
    - for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
    - it is not possible to tune outside the span displayed during a playback,
    - the equalizer is disabled in OFFLINE mode.

Regards, and thank you for your comments,

Vianney

Il 22/01/2022 18:40, Otso Ylönen ha scritto:

Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.

 

As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.

 

 

 

I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Bill Nollman
Lähetetty: lauantai 22. tammikuuta 2022 16.39
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 

Sorry to report another (possible) v3.53 bug.

  1. I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
  2. The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).

 

Is anyone else having the same problem? I was using v3.50 before this update with no problem.

 

Bill Nollman

Farmington, CT

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Friday, January 21, 2022 5:16 PM
To: EladSDR@groups.io
Subject: VS: [EladSDR] FDM-SW2 Update

 

Hi Vianney,

 

I have done some testing already:

  1. I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
  2. The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
  3. I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
  4. I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
  5. It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional  filters!
  6. The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
  7. Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!

 

Thank you for your continued work on this great piece of software!

BR, Otso

 

 

I  have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: perjantai 21. tammikuuta 2022 13.53
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Hello,

the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.

The most important changes are:
    - possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
    - added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
    - improved keyboard shortcuts management (with addition of new shortcuts),
    - added the possibility to use the memories even when playing a file,

    - improved software stability for the S3.

Regards,

Vianney

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

 

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 


--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Re: FDM-SW2 Update

Otso Ylönen
 

Thanks Vianney! Number entry to BW and filter fields work as expected now.

 

Regarding Station Memories, clicking on the rows on the list (see my earlier post) does nothing but changes the mode as I am playing back 1.5 MHz MW recordings and trying to jump to another MW frequency using the Station Memories window. During playback, the whole 1.5 MHz range is displayed, therefore, I do not think ”I am tuning outside of the displayed span”, right? I must be doing something wrong if no-one else has this problem!

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: maanantai 24. tammikuuta 2022 14.10
Vastaanottaja: EladSDR@groups.io
Aihe: Re: VS: [EladSDR] FDM-SW2 Update

 


Version 3.54 should fix the issues on Notches and Filter BW.

Some information:
    - for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
    - it is not possible to tune outside the span displayed during a playback,
    - the equalizer is disabled in OFFLINE mode.

Regards, and thank you for your comments,

Vianney

Il 22/01/2022 18:40, Otso Ylönen ha scritto:

Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.

 

As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.

 

 

 

I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Bill Nollman
Lähetetty: lauantai 22. tammikuuta 2022 16.39
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 

Sorry to report another (possible) v3.53 bug.

  1. I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
  2. The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).

 

Is anyone else having the same problem? I was using v3.50 before this update with no problem.

 

Bill Nollman

Farmington, CT

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Friday, January 21, 2022 5:16 PM
To: EladSDR@groups.io
Subject: VS: [EladSDR] FDM-SW2 Update

 

Hi Vianney,

 

I have done some testing already:

  1. I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
  2. The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
  3. I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
  4. I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
  5. It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional  filters!
  6. The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
  7. Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!

 

Thank you for your continued work on this great piece of software!

BR, Otso

 

 

I  have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: perjantai 21. tammikuuta 2022 13.53
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Hello,

the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.

The most important changes are:
    - possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
    - added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
    - improved keyboard shortcuts management (with addition of new shortcuts),
    - added the possibility to use the memories even when playing a file,

    - improved software stability for the S3.

Regards,

Vianney

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

 

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 


Re: FDM-SW2 Update

Vianney Colombat
 


The problem is that the TMate2 has only 9 digits. Maybe it's possible to switch to a kHz visualization when the frequency value is higher than 1GHz.

Regards,

Vianney


Il 21/01/2022 21:01, Francesco Di Giovanni ha scritto:
Hello Vianney,
will the T-Mate TM-2 in the future support such visualization?

73
Francesco Di Giovanni, IN3XZP

--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Re: VS: [EladSDR] FDM-SW2 Update

Vianney Colombat
 


Version 3.54 should fix the issues on Notches and Filter BW.

Some information:
    - for a list of all shortcuts check here : https://www.eladit.com/get-file?path=sdr%2FFDM-sw2+Software%2FDoc%2FELAD+FDM-SW2+-+Quick-start+guide+-+rev+10.pdf
    - it is not possible to tune outside the span displayed during a playback,
    - the equalizer is disabled in OFFLINE mode.

Regards, and thank you for your comments,

Vianney


Il 22/01/2022 18:40, Otso Ylönen ha scritto:

Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.

 

As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.

 

 

 

I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Bill Nollman
Lähetetty: lauantai 22. tammikuuta 2022 16.39
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 

Sorry to report another (possible) v3.53 bug.

  • I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
  • The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).

 

Is anyone else having the same problem? I was using v3.50 before this update with no problem.

 

Bill Nollman

Farmington, CT

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Friday, January 21, 2022 5:16 PM
To: EladSDR@groups.io
Subject: VS: [EladSDR] FDM-SW2 Update

 

Hi Vianney,

 

I have done some testing already:

  • I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
  • The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
  • I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
  • I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
  • It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional  filters!
  • The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
  • Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!

 

Thank you for your continued work on this great piece of software!

BR, Otso

 

 

I  have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: perjantai 21. tammikuuta 2022 13.53
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Hello,

the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.

The most important changes are:
    - possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
    - added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
    - improved keyboard shortcuts management (with addition of new shortcuts),
    - added the possibility to use the memories even when playing a file,

    - improved software stability for the S3.

Regards,

Vianney

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 


--
Vianney Colombat
ELAD Italy



Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


VS: [EladSDR] FDM-SW2 Update

Otso Ylönen
 

Yes, same here with the BW entry. I suppose there is really just one reson for these two findings: all number input is currently sent to the main frequency field.

 

As I use the TM-2 when playing back files, I seldom need to enter anything to the BW field.

 

 

 

I would like to know if the memory window works for anyone else. I.e. can you jump to the frequencies saved into Station Memories when playing back files?

 

BR, Otso

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Bill Nollman
Lähetetty: lauantai 22. tammikuuta 2022 16.39
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 

Sorry to report another (possible) v3.53 bug.

  • I can no longer double click on the number in the Filter BW box and directly enter a bandwidth (for example 192000). Entering any number only changes the main frequency.
  • The good thing is Z and X will step through the entries on the Demod Settings Tab / BW Presets (which I previously didn’t know about and works very nice!).

 

Is anyone else having the same problem? I was using v3.50 before this update with no problem.

 

Bill Nollman

Farmington, CT

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Friday, January 21, 2022 5:16 PM
To: EladSDR@groups.io
Subject: VS: [EladSDR] FDM-SW2 Update

 

Hi Vianney,

 

I have done some testing already:

  • I really like the possibility to use keyboard commands during playback, i.e. even if I use the mouse to jump within the time scale.
  • The Ctrl-F & B are a nice addition, but as I like to use quite a long file size (over 30 min), 10% is often too much as a standard step. A possibility to set the percentage (in settings) would be a great thing.
  • I have missed a way to quickly jump between frequencies during live sessions. Therefore, I believe I learn to like to Ctrl-Z/Y shortcuts.
  • I was not able to figure out how to use the Station Memories window during file playback. I tried clicking with the mouse as well as several key presses on the rows. The only thing that changes is the mode, if defined with the memory entry. (This is how it has been earlier, too.)
  • It seems that I cannot enter notch frequencies or related bandwidths by typing them into the respective fields anymore. Otherwise, I suppose that their usage with the new shorcut Q might be bit quicker now. I hope this bug will be quickly mended as I use both of the filters almost all the time when listening to MW files (to block adjacent channel QRM). I would actually like to have a couple of additional  filters!
  • The equalizer har really never worked for me: It is disabled when I open the AF Window and the ”ON-button” is greyed out.
  • Jump to start/end may turn out useful, but Ctrl-Shift-F does not take you to the next file. It takes you near the end of the current file and in my case with long files, you have to wait a wile before playback takes you to the next file. I would really appreciate proper jumping between the file sequence. Back and forth!

 

Thank you for your continued work on this great piece of software!

BR, Otso

 

 

I  have lot of memory entries, mostly MW offsets as well as ”watchlist for AM and FM:

 

Lähetetty Windowsin Sähköpostiista

 

Lähettäjä: Vianney Colombat
Lähetetty: perjantai 21. tammikuuta 2022 13.53
Vastaanottaja: EladSDR@groups.io
Aihe: Re: [EladSDR] FDM-SW2 Update

 


Hello,

the version 3.53 of the SW2 software is available in the Under test folder along with some release notes.

The most important changes are:
    - possibility to change the background of the spectrum and to save on file all the colors that can be set by the software,
    - added the possibility to choose whether to display 9 or 12 digits for the Advanced Tuning window,
    - improved keyboard shortcuts management (with addition of new shortcuts),
    - added the possibility to use the memories even when playing a file,

    - improved software stability for the S3.

Regards,

Vianney

--
Vianney Colombat
ELAD Italy


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

601 - 620 of 20621