Date   

Re: Amp availability

Paul Jones
 

They are hoping to get back into the factory next week, then I should get some shipments, it all depends on what stock they have or need to produce more. 

Paul EladUSA 


On Apr 16, 2020, at 20:06, Mark Stewart <spooter12@...> wrote:

How long before the amp/tuner units are available for purchase in the states?


Amp availability

Mark Stewart <spooter12@...>
 

How long before the amp/tuner units are available for purchase in the states?


Re: WSJT-X

Charles Ristorcelli
 

Hi John.

I have WSJT-X and JTAlert running with my Elad DUO and have been doing ds for over a year.

Do you have the user manuals for WSJT-X and JTAlert (if you plan to use it).

I'll be happy to help if you wish. I'll do so via the group, or we can do so via email.
--
73 de NN3V


Re: WSJT-X

Neil Smith G4DBN
 

That sounds like a very good excuse John!  Best wishes for your recovery.

Neil G4DBN

On 15/04/2020 14:16, John N8LLC wrote:
Thank you very much Neil  sorry about the delay had quadruple bypass Feb 10th  and dealing with
The recovery.
I am using  the ELAD FDM DOU no other software using comm ports.
That said i will try your settings and see what happens i will let you know
The results.
Again thank you.
73's
N8LLC-JOHN


Re: WSJT-X

John N8LLC <n8llcgeneral@...>
 

Thank you very much Neil  sorry about the delay had quadruple bypass Feb 10th  and dealing with
The recovery.
I am using  the ELAD FDM DOU no other software using comm ports.
That said i will try your settings and see what happens i will let you know
The results.
Again thank you.
73's
N8LLC-JOHN


Re: SDR Consol 3.0.22 now available for Elad FDM Duo #fdm-duo #eladduo

Kjell-Goran SM4GRP
 

Hello Mike
You can of course use SDRC for receive and handle transmit settings manually via the DUO frontpanel/menue. What you miss using SDRC is the macro buttons, which I value very much. The possibility to customize the DUO for you own needs via the macros is really great. I think the DUO is a fantastic radio, I have had mine for 5 years now and I love it. I would appreciate it even more if I could use both ELAD's own software SW2 or SDRC. Whichever I prefer from day to day. That would make me value the DUO even more. Hopefully this will happen in the near future. I wouldn't stop using SW2 but would appreciate the possibility to also use SDRC.

73 de Kjell-Goran / SM4GRP


Re: SDR Consol 3.0.22 now available for Elad FDM Duo #fdm-duo #eladduo

mike bayard
 
Edited

i have the receiver working  but seen the statement {There is no transmit support for the FDM DUO, this is a restriction in the support library from ELAD.} on their web site is there a work around being able to run other software would make the elad worth more or am i just missing something ? 73


Re: FDM DUO Black For Sale

David Ausley <dausley@...>
 

FDM DUO has been SOLD
Tnx,
WB4NCT


Re: FDM DUO Black For Sale

Paul Andrews
 

Dave - WB4NCT

I just sent you a message by email.

Paul



On Mon, Apr 13, 2020 at 12:00 PM David Ausley via groups.io <dausley=yahoo.com@groups.io> wrote:
Just listed on QRZ with pictures.....
Like new FDM DUO (Black) Like new, no scratches , indoors, non smoking shack. Included: FDM DUO transceiver, stock hand mic, 2 shielded USB cables, power cord with power poles, printed copy of operating and software manuals, USB memory stick loaded with original software, and “Blue Duo” Bluetooth dongle

$750  shipped to lower 48 states
PayPal only
Thanks! Dave, WB4NCT



--
Paul Andrews
SVP - Sales & Marketing
TelVue Corporation
1-800-885-8886 x102


FDM DUO Black For Sale

David Ausley <dausley@...>
 

Just listed on QRZ with pictures.....
Like new FDM DUO (Black) Like new, no scratches , indoors, non smoking shack. Included: FDM DUO transceiver, stock hand mic, 2 shielded USB cables, power cord with power poles, printed copy of operating and software manuals, USB memory stick loaded with original software, and “Blue Duo” Bluetooth dongle

$750  shipped to lower 48 states
PayPal only
Thanks! Dave, WB4NCT


Re: SDR Consol 3.0.22 now available for Elad FDM Duo #fdm-duo #eladduo

Neil Coley <coleyneil1@...>
 

Does anyone have a walk through for set up please?

Stay safe all

Neil



On 12 Apr 2020, at 19:45, F0ECM <st140@...> wrote:

Good morning all,

Elad FDM Duo / Duo R now works with the new SDR Consol v3.0.22 version.

<dummyfile.0.part>


73, Eric F0ECM


Re: SDR Consol 3.0.22 now available for Elad FDM Duo #fdm-duo #eladduo

Neil Smith G4DBN
 

Seems to work, just need to sort out transverter offsets and transmit sync. Nice that is does up to 999GHz, but I can't find where to create a transverter offset with a DUO. Really it needs a table like in SW2 where you could set it so when you select 10368.200 MHz as the tuning frequency, it automatically sets the offset from a table to 10340.000MHz, and same for all the other bands.  I think there is an offset setting for RTL dongles, so it probably just needs a bit more coding to be added.

Haven't worked out how to get it to transmit CW on the correct frequency, I guess it isn't locked to the standalone, so transmit is wherever the standalone tuning is, rather than where the program is receiving.  Can't find how to mute it on CW TX either. Guess that will need some extra coding.  Also it changed my TXOUT to the 5 watt PA instead of the 0dBm, not sure why it changed that, or what else it has changed. Must be some settings I haven't found yet.

Anyway, early days, but it certainly works on receive. The image is actually the rainscatter signal on 10GHz from GB3PKT in JO01 as received here in IO93

Neil G4DBN


On 12/04/2020 22:17, Neil Coley wrote:
I’m on BUT radio and console are not talking to each other!!

Vfo on radio adjusts spectrum on console but each showing different frequencies

I’ll have another go tomorrow but any pointers welcome 

Neil



On 12 Apr 2020, at 19:45, F0ECM <st140@...> wrote:

Good morning all,

Elad FDM Duo / Duo R now works with the new SDR Consol v3.0.22 version.

<dummyfile.0.part>


73, Eric F0ECM
-- 
Neil
http://g4dbn.uk


Re: SDR Consol 3.0.22 now available for Elad FDM Duo #fdm-duo #eladduo

Neil Coley <coleyneil1@...>
 

I’m on BUT radio and console are not talking to each other!!

Vfo on radio adjusts spectrum on console but each showing different frequencies

I’ll have another go tomorrow but any pointers welcome 

Neil



On 12 Apr 2020, at 19:45, F0ECM <st140@...> wrote:

Good morning all,

Elad FDM Duo / Duo R now works with the new SDR Consol v3.0.22 version.

<dummyfile.0.part>


73, Eric F0ECM


Re: SDR Consol 3.0.22 now available for Elad FDM Duo #fdm-duo #eladduo

Hendrik J. Hamer
 


Tnx!


Verzonden vanaf mijn Samsung Galaxy-smartphone.


SDR Consol 3.0.22 now available for Elad FDM Duo #fdm-duo #eladduo

F0ECM
 

Good morning all,

Elad FDM Duo / Duo R now works with the new SDR Consol v3.0.22 version.



73, Eric F0ECM


Re: Elad Update and SW2 goodies

Neil Smith G4DBN
 

Solved the flicker issue, I had somehow selected averaging of 4 on the waterfall.  It was the same when I went back to 3.031. I have now set the refresh rate of my monitor to 59Hz and the screen update in SW2 to 57ms, so there can't be any common factors to cause flicker. It is good and smooth again.

I've reinstalled 3.033 and it is working OK apart from two bugs which I need to investigate further.  It throws a "too large" exception error when it is trying to save an amended memory file with frequencies in the 10GHz band. 

Also it fails to load the memories at startup, probably for the same reason.

I'll investigate more closely when I have some time, but it is nice to have the real frequency displayed now when I'm on SHF bands.  This is the wind farm doppler reflections of GB3FNY, about 20km from here.  I can fix the problem for now by going back to using 368,751 as the frequency (booo!).  I'll raise a proper ticket later. Have to be up early.

Neil G4DBN


Re: Elad Update and SW2 goodies

Neil Smith G4DBN
 

Oh, I spoke too soon. There *is* something weird. After a few minutes of staring at the screen, I am getting eyestrain. Feels like the waterfall is flickering really badly at high speed. Have I got a wrong setting inherited from 3.0.31 or can anyone else comment on whether their waterfalls (IF and RF) are scrolling smoothly or have an ultra-fast flicker?

Neil G4DBN

On 08/04/2020 15:15, Neil Smith G4DBN wrote:

 Not found anything weird  in 3.033 so far


Re: Elad Update and SW2 goodies

Neil Smith G4DBN
 

 Not found anything weird  in 3.033 so far, but I use other programs for recordings.  I haven't tried putting 10.340 GHz offsets in to get a proper display on 3cm, still using the 340MHz kludge.  Will have a play later. Always best to send bug reports and feature requests to the support ticket system, after a sanity check on the forum of course...

Neil G4DBN

On 08/04/2020 14:59, Bill Nollman wrote:

Updating and shortening my list…

 

1. Filename 000->001->002 doesn’t change. I reverted back to 3.019 until fixed.

2. The larger frequency display is ugly on a 24” monitor. Others like it, I can live with it.

3. The play, record button and filename/time colors look good. Nice improvement.

4. The “Created on:” after the filename is not needed and wastes space on screen.

5. UTC AM/PM – Otso is correct, I changed my system time and that’s much better. Thank you!

6. What is “Player: Apply recorded File Settings when playing file” option for?

7. Guido would like to jump backwards by files during playback. I agree but we all know asking for features on this list doesn’t usually get us anywhere ;-)

 

Bill

 



Re: Elad Update and SW2 goodies

Bill Nollman
 

Updating and shortening my list…

 

1. Filename 000->001->002 doesn’t change. I reverted back to 3.019 until fixed.

2. The larger frequency display is ugly on a 24” monitor. Others like it, I can live with it.

3. The play, record button and filename/time colors look good. Nice improvement.

4. The “Created on:” after the filename is not needed and wastes space on screen.

5. UTC AM/PM – Otso is correct, I changed my system time and that’s much better. Thank you!

6. What is “Player: Apply recorded File Settings when playing file” option for?

7. Guido would like to jump backwards by files during playback. I agree but we all know asking for features on this list doesn’t usually get us anywhere ;-)

 

Bill

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Otso Ylönen
Sent: Wednesday, April 8, 2020 2:43 AM
To: EladSDR@groups.io
Subject: Re: [EladSDR] Elad Update and SW2 goodies

 

I also have such small-pixeled displays, that my preference is driven by readabolity rather than aesthetics. Therefore also my ask about the increase for display of the playback time.

 

BTW, on my screen, the playback time is shown  with a 24-hour display. I suppose SW2 uses the system default.

 

BR, Otso

 

 

Gesendet: Mittwoch, 08. April 2020 um 06:22 Uhr
Von: "Paul Jones" <support@...>
An: EladSDR@groups.io
Betreff: Re: [EladSDR] Elad Update and SW2 goodies

Re the larger frequency display, it stands out much better on Hd/4K displays, the older smaller display was a little more difficult to read at 4K, it’s the same font just slightly larger, not by much. 

 

Paul 
 

 

 

On Apr 7, 2020, at 21:32, Bill Nollman <billct97@...> wrote:
 



Just loaded 3.033.

 

1. I believe someone already reported that when playing back the filename doesn’t change when the file number increments. That’s enough of a problem to revert back to an earlier version for me.

2. The larger frequency display is ugly. Is there any way to change it back or have an option to select the size. I can live with this.

3. The play, record button and filename/time colors look good. Nice improvement.

4. The “Created on:” after the filename is not needed for two reasons. If you copy your wav files to larger drives and then back for listening, the “Created on:” date shows when you copied the file not the original recording date. The original recording date is already shown to the right of that in the UTC date and time. I don’t see any reason for “Created on:” date and time.

5. Which brings up something that puzzles me, why display UTC in AM or PM? A 24 hour clock would be so much more useful IMHO. Maybe it’s because I DX FM and not so much MW or SW but to me 24 hour would be much better.

6. The Recorder/Player Tab does look neater. I would love to know who uses the “Player: Apply recorded File Settings when playing file” option. When I check it and play a sequence of recordings, when the file increments the frequency changes to what I assume was the frequency that I was tuned to when the recording was created. I think I even reported this as a bug years ago and was told this is working as designed. I’d still love to know what someone would do with that?

 

Thanks,

Bill

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Paul Jones
Sent: Saturday, April 4, 2020 11:26 PM
To: EladSDR@groups.io
Subject: [EladSDR] Elad Update and SW2 goodies

 

Hey All,

 

So just a little update, at my last conversation, everyone at the factory in Italy is doing OK, No infections, but that can change daily, but so far so good. Everyone is at home

Franco was at the factory for a while, but now EVERYONE is working from home.

 

Not sure if you had seen but there is a new Test version of SW2 (3.033) in the Undertest folder, I’ve found it very stable and it has some nice changes, the Frequency Display is slightly larger

And a request we had at Dayton 2 years ago has made it in, the panel behind the volume controls is now highlighted with the matching RX color, so it is easy to see at a glance which volume

Control needs to be used for the active RX. This needs to be turned on in the SET menu under graphics, and you can set the opacity in the color page

 

 

<image001.jpg>

 

This is at 50% on RX1

 

 

<image002.jpg>

 

 

Set the 3 check boxes to apply then if you want is more opaque the click on edit color settings

 

Here are the latest changes to SW2 and this is available under http://eladit.com/download/sdr/FDM-sw2%20Software/Under%20test/index.php?lang=EN

 

--> Version 3.033 / March 24, 2020

  - enlarged frequency viewing

  - added the possibility to press Enter to start the FDM-SW2 when the FDM

    devices selection window appears

  - added in the Graphics tab of the Setup window some options to:

    - 1. highlight the selected receiver in the volumes panel: the volumes

      of the selected receiver are colored with the color of the receiver, it is

      possible to change the transparency of the color using the

      "Color Settings" window

    - 2. color the step value with the color of the selected receiver

    - 3. color the mode, the band filter and the AGC with the color of the

      selected receiver

  - changed the color management on the Advanced Tuning window:

    - 1. if "Local Oscillator" (center frequency of the spectrum) is chosen, the

      color remains the default one

    - 2. if you select "Selected Receiver" (selected receiver frequency) the

      color becomes that of the selected receiver

  - recorder/player:

    - 1. modified the graphic part of the recorder/player especially for as

      regards the colors, the aim is to better highlight the different cases:

      turned off, recording scheduled, recording in progress and playing in

      progress

    - 2. added the following keyboard shortcuts:

      - CTRL+L for LOOP PLAY

      - CTRL+R for RECORD

      - CTRL+P for PLAY and PAUSE

      - CTRL+S for STOP

    - 3. fixed the window for entering the name of the recording so that it is

      easier to start recording

    - 4. fixed the Recording Scheduler window and the Recording tab of the

      Setup window so that the controls are clearer

  - added support for CWR mode for Omnirig

  - fixed issue on the CAT 0xF7 TRANSCEIVER STATUS command (inverted again the

    status in the answer), added the possibility in the Setup window to invert

    the answer state of this command (this is for compatibility with some

    proprietary software)

  - fixed issue that set the focus incorrectly after having set the frequency

    with the keyboard (digits + entere key)

  - FDM-DUO:

    - 1. fixed some minor errors in macro creation

    - 2. fixed problem when closing the Stand-Alone panel

    - 3. fixed the fact that after starting the software, and activating the

      transmission on a virtual receiver the input options for transmission were

      set to software defaults (KEY and MIC), now the software reads the value                           

      set on the FDM-DUO (the AUTO choice for the TX IN menu of the FDM-DUO,

      menu 32, is not yet supported)

     

--> Version 3.032 / February 21, 2020

  - OmniRig management:

    - corrected issue in reading the frequency

    - fixed some issues on rig2 management

    - optimized general management of OmniRig

    - removed LockToCF on RX1 and Lock ABS on RX2

  - continued extension of the supported frequency range, including at graphic

    level for frequency display

  - added the possibility to delete a frequency digit with the backspace key

    of the keyboard typing a frequency

  - added shortcut to Lock ABS with the letter O on the keyboard

  - updated quick start window

  - modified the Advanced Tuning window, removed some features with malfunction

  - improved closing management of the software

  - updated the dll for the FDM-S3 (file ExtIOmc_ELAD_FDMS3_v0_22_0_2.dll)

  - slightly revised the graphics of the setup window

 - TMate2 management:

    - corrected an issue in saving the settings

    - lowered the default value of the LCD refresh time (100ms)

    - added the possibility in the setup window to choose presets as regards

      the management of the main knob

     

--> Version 3.031 / January 16, 2020 (alpha version)

  - extended to channel 2 the fix of startup crash due Hz/kHz setting

 

--> Version 3.030 / November 28, 2019 (alpha version)

  - start of TMmini management

  - fixed startup crash due to Hz/kHz setting

 

--> Version 3.029 / August 1, 2019 (alpha version)

  - updated the dll for the FDM-S3 (file ExtIOmc_ELAD_FDMS3.dll v0.21)

  - fixed an issue in the visualization of the current configuration near the

    serial number of the connected FDM device

          

--> Version 3.028 / April 24, 2019 (alpha version)

  - started extension of the supported frequency range

 

 

 

Have a Radiolutionary Day!
Paul

--

Paul Jones - Elad USA Sales & Technical Support (USA)

<image003.jpg>


FDM-Duo, Duo-Art, FDM-DUOR,  FDM-S3, FDM-S2, FDM-S2, FDM-SW2, T-Mate

 

Visit http://www.eladit.com for the full range of Elad Products or USA Sales : https://shop.elad-usa.com/

Email Support Group - https://groups.io/g/EladSDR

Sales Phone: 312.320.8160

Support Email: support@... Sales Email: sales@...
Personal Email: Paul@...
 

 

 

 

 


Re: Elad Update and SW2 goodies

Guido Schotmans
 

I like the larger frequency display. It has also a better contrast.

 

What I miss for ages now is the possibility to jump to a previous recorded file when in playback mode. Only possibility is to start over again or load the file again.

 

73,

 

Guido.

 

Van: EladSDR@groups.io Namens Bill Nollman
Verzonden: woensdag 8 april 2020 3:32
Aan: EladSDR@groups.io
Onderwerp: Re: [EladSDR] Elad Update and SW2 goodies

 

Just loaded 3.033.

 

1. I believe someone already reported that when playing back the filename doesn’t change when the file number increments. That’s enough of a problem to revert back to an earlier version for me.

2. The larger frequency display is ugly. Is there any way to change it back or have an option to select the size. I can live with this.

3. The play, record button and filename/time colors look good. Nice improvement.

4. The “Created on:” after the filename is not needed for two reasons. If you copy your wav files to larger drives and then back for listening, the “Created on:” date shows when you copied the file not the original recording date. The original recording date is already shown to the right of that in the UTC date and time. I don’t see any reason for “Created on:” date and time.

5. Which brings up something that puzzles me, why display UTC in AM or PM? A 24 hour clock would be so much more useful IMHO. Maybe it’s because I DX FM and not so much MW or SW but to me 24 hour would be much better.

6. The Recorder/Player Tab does look neater. I would love to know who uses the “Player: Apply recorded File Settings when playing file” option. When I check it and play a sequence of recordings, when the file increments the frequency changes to what I assume was the frequency that I was tuned to when the recording was created. I think I even reported this as a bug years ago and was told this is working as designed. I’d still love to know what someone would do with that?

 

Thanks,

Bill

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Paul Jones
Sent: Saturday, April 4, 2020 11:26 PM
To: EladSDR@groups.io
Subject: [EladSDR] Elad Update and SW2 goodies

 

Hey All,

 

So just a little update, at my last conversation, everyone at the factory in Italy is doing OK, No infections, but that can change daily, but so far so good. Everyone is at home

Franco was at the factory for a while, but now EVERYONE is working from home.

 

Not sure if you had seen but there is a new Test version of SW2 (3.033) in the Undertest folder, I’ve found it very stable and it has some nice changes, the Frequency Display is slightly larger

And a request we had at Dayton 2 years ago has made it in, the panel behind the volume controls is now highlighted with the matching RX color, so it is easy to see at a glance which volume

Control needs to be used for the active RX. This needs to be turned on in the SET menu under graphics, and you can set the opacity in the color page

 

This is at 50% on RX1

 

 

Set the 3 check boxes to apply then if you want is more opaque the click on edit color settings

 

Here are the latest changes to SW2 and this is available under http://eladit.com/download/sdr/FDM-sw2%20Software/Under%20test/index.php?lang=EN

 

--> Version 3.033 / March 24, 2020

  - enlarged frequency viewing

  - added the possibility to press Enter to start the FDM-SW2 when the FDM

    devices selection window appears

  - added in the Graphics tab of the Setup window some options to:

    - 1. highlight the selected receiver in the volumes panel: the volumes

      of the selected receiver are colored with the color of the receiver, it is

      possible to change the transparency of the color using the

      "Color Settings" window

    - 2. color the step value with the color of the selected receiver

    - 3. color the mode, the band filter and the AGC with the color of the

      selected receiver

  - changed the color management on the Advanced Tuning window:

    - 1. if "Local Oscillator" (center frequency of the spectrum) is chosen, the

      color remains the default one

    - 2. if you select "Selected Receiver" (selected receiver frequency) the

      color becomes that of the selected receiver

  - recorder/player:

    - 1. modified the graphic part of the recorder/player especially for as

      regards the colors, the aim is to better highlight the different cases:

      turned off, recording scheduled, recording in progress and playing in

      progress

    - 2. added the following keyboard shortcuts:

      - CTRL+L for LOOP PLAY

      - CTRL+R for RECORD

      - CTRL+P for PLAY and PAUSE

      - CTRL+S for STOP

    - 3. fixed the window for entering the name of the recording so that it is

      easier to start recording

    - 4. fixed the Recording Scheduler window and the Recording tab of the

      Setup window so that the controls are clearer

  - added support for CWR mode for Omnirig

  - fixed issue on the CAT 0xF7 TRANSCEIVER STATUS command (inverted again the

    status in the answer), added the possibility in the Setup window to invert

    the answer state of this command (this is for compatibility with some

    proprietary software)

  - fixed issue that set the focus incorrectly after having set the frequency

    with the keyboard (digits + entere key)

  - FDM-DUO:

    - 1. fixed some minor errors in macro creation

    - 2. fixed problem when closing the Stand-Alone panel

    - 3. fixed the fact that after starting the software, and activating the

      transmission on a virtual receiver the input options for transmission were

      set to software defaults (KEY and MIC), now the software reads the value                           

      set on the FDM-DUO (the AUTO choice for the TX IN menu of the FDM-DUO,

      menu 32, is not yet supported)

     

--> Version 3.032 / February 21, 2020

  - OmniRig management:

    - corrected issue in reading the frequency

    - fixed some issues on rig2 management

    - optimized general management of OmniRig

    - removed LockToCF on RX1 and Lock ABS on RX2

  - continued extension of the supported frequency range, including at graphic

    level for frequency display

  - added the possibility to delete a frequency digit with the backspace key

    of the keyboard typing a frequency

  - added shortcut to Lock ABS with the letter O on the keyboard

  - updated quick start window

  - modified the Advanced Tuning window, removed some features with malfunction

  - improved closing management of the software

  - updated the dll for the FDM-S3 (file ExtIOmc_ELAD_FDMS3_v0_22_0_2.dll)

  - slightly revised the graphics of the setup window

 - TMate2 management:

    - corrected an issue in saving the settings

    - lowered the default value of the LCD refresh time (100ms)

    - added the possibility in the setup window to choose presets as regards

      the management of the main knob

     

--> Version 3.031 / January 16, 2020 (alpha version)

  - extended to channel 2 the fix of startup crash due Hz/kHz setting

 

--> Version 3.030 / November 28, 2019 (alpha version)

  - start of TMmini management

  - fixed startup crash due to Hz/kHz setting

 

--> Version 3.029 / August 1, 2019 (alpha version)

  - updated the dll for the FDM-S3 (file ExtIOmc_ELAD_FDMS3.dll v0.21)

  - fixed an issue in the visualization of the current configuration near the

    serial number of the connected FDM device

          

--> Version 3.028 / April 24, 2019 (alpha version)

  - started extension of the supported frequency range

 

 

 

Have a Radiolutionary Day!
Paul

--

Paul Jones - Elad USA Sales & Technical Support (USA)

FDM-Duo, Duo-Art, FDM-DUOR,  FDM-S3, FDM-S2, FDM-S2, FDM-SW2, T-Mate

Visit http://www.eladit.com for the full range of Elad Products or USA Sales : https://shop.elad-usa.com/

Email Support Group - https://groups.io/g/EladSDR

Sales Phone: 312.320.8160

Support Email: support@... Sales Email: sales@...
Personal Email: Paul@...
 
 

 

 

Attachments:


Virus-free. www.avg.com

2741 - 2760 of 19689