Date   

Re: HAM RADIO DELUXE PTT

Alain Reiner <alain@...>
 

Hello Mark,

Ok then, Saturday next week it is. While I will be connected to your PC, we will need to talk. By telephone ?

73, Alain F4HFS

Le 08/01/2020 à 00:37, Mark Gottlieb a écrit :

Alain,

 

This Saturday morning, my time, I will not be available.  We can look at the next week if you like.  I am in no urgent hurry and appreciate your offer of assistance.

 

73

 

Mark

KK2L

 

antenna sunset

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Tuesday, January 7, 2020 3:42 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

OK, sure. As I am working for a living, Saturday would be just fine. I will see my son and my grand daughters on Sunday. Could be 9 or 10 AM your side ( 3 or 4 PM in Paris ) as you prefer.

73, Alain
F4HFS

Le 07/01/2020 à 21:24, Mark Gottlieb a écrit :

Alain,

 

I like the TeamViewer idea.  We have a 6 hour time difference so I imagine a weekend day would be most convenient for you.  Let me know.  Merci Beaucoup!

 

73

 

Mark

KK2L

 

antenna sunset

 

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Tuesday, January 7, 2020 3:18 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Mark,

Your 2 macros run just fine on my DM780. I do not see anything wrong. I attached the shots where you can see how I've set them up.

Did you do anything different ?

The only other way I see to help you is you give me a remote access to your computer (using team viewer) and I would compare your settings with mine. Or you could call the HRD help.

Have you another idea ?

Alain F4HFS


Le 07/01/2020 à 03:47, Mark Gottlieb a écrit :

No luck, yet, but I think I am getting closer.  Here are two of my macros.  Neither one will go into TX when I click Send.  Do you see something wrong in the way they are written?

 

#++

#

#   End of a reply to the other station, his callsign

#   is taken from the Add Log Entry Callsign field.

#

#--

#

<his:callsign> <his:callsign> de <my:callsign> <my:callsign> I am reading you 599 599.  The name, here, is Mark.  How Copy?  BTU <his:callsign> de <my:callsign>  pse kn <stop>

 

 

 

 

#++

#

#   QRZ, stops TX when all text sent.

#

#--

#TX 0    //  TX = Off

QRZ QRZ QRZ de <my:callsign> <my:callsign> <my:callsign> pse k <stop>

 

 

 

 

 

 

73

 

Mark

KK2L

 

antenna sunset

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 4:10 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Sorry Mark, I did not help.

other thoughts on the macro side. please check in the macro window  :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ? (checkbox)
- Do you have a mode enabled in the "Enable By Mode" window ?
I use the macro by first displaying the text in the TX window for possible edition, and then I send the text using the send button (DM780).

Do you have another TRx which HRD/DM780 would properly work with ?
 
What is your version of HRD + DM780 ?

73,
Alain F4HFS

Le 06/01/2020 à 21:28, Mark Gottlieb a écrit :

Hello Alain,

 

I have HRD already configured as you describe here.  The TX button, in the radio section, in DM780 will key up the radio if I manually apply it.  My problem is that when I am attempting to send a macro the radio will not go in TX.  I have attempted to set up with both HRD and Mini-Deluxe 2.1, which takes less processing, and I have achieved the same results in that the radio will not go into TX unless I manually apply the button.    I am getting the exact same results with the ELAD and with my FLEX 6400.  BTW, I have been using HRD since 2014.   Thank-you for offering your assistance.

 

73

 

Mark

KK2L

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 3:14 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD program options

4) DM780 program options

DM780 program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780 TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS




Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :

Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L






-- 
Alain Reiner





-- 
Alain Reiner




-- 
Alain Reiner



-- 
Alain Reiner

-- 
Alain Reiner


Re: Possible to tell year of manufacture from serial number?

KF4VAR
 

Great and timely help and information from Paul Jones and Elad. Got the information I requested  quickly.
Many thanks to Paul Jones & Elad.

Regards &73
Carr KF4VAR


Re: PTT CABLE

Craig Williams KA6RWL
 

I just used one side of an old stereo audio cable to my RM Italy 305v RCA jack and it works fine. Nothing special needed for an amp without ALC .

I also tried it once as an experiment  into my Palstar LA-1K and it worked fine.

On Wed, Jan 8, 2020 at 6:28 AM Mark Gottlieb <kk2l@...> wrote:
Happy New Year Everyone,

What would be the suggested cable for the PTT - OUT to use for an amplifier.  I know it requires a 3.5" stereo cable but are there any resistors/diodes have to be placed in line with that cable?  Do certain amplifiers need special attention when connecting the radio to them?

73

Mark
KK2L


Re: PTT CABLE

Josh Murray <josh@...>
 

I just use a stereo 3.5mm to dual phono(rca) plug cable and use whichever rca plug that keys the amp :)

On Wed, 8 Jan 2020 at 17:49, phoekzema Hoekzema <phoekzema@...> wrote:

With the Hardrock 50 all I needed was a 3.5 MONO to a RCA phono plug for PTT.

I hope all other amps are as simple.

 

Peter WA7MOX

 

Sent from Mail for Windows 10

 

From: Mark Gottlieb
Sent: Wednesday, January 8, 2020 8:28 AM
To: EladSDR@groups.io
Subject: [EladSDR] PTT CABLE

 

Happy New Year Everyone,

What would be the suggested cable for the PTT - OUT to use for an amplifier.  I know it requires a 3.5" stereo cable but are there any resistors/diodes have to be placed in line with that cable?  Do certain amplifiers need special attention when connecting the radio to them?

73

Mark
KK2L

 

--
Many Thanks

Best Regards

Josh Murray


Re: PTT CABLE

phoekzema Hoekzema
 

With the Hardrock 50 all I needed was a 3.5 MONO to a RCA phono plug for PTT.

I hope all other amps are as simple.

 

Peter WA7MOX

 

Sent from Mail for Windows 10

 

From: Mark Gottlieb
Sent: Wednesday, January 8, 2020 8:28 AM
To: EladSDR@groups.io
Subject: [EladSDR] PTT CABLE

 

Happy New Year Everyone,

What would be the suggested cable for the PTT - OUT to use for an amplifier.  I know it requires a 3.5" stereo cable but are there any resistors/diodes have to be placed in line with that cable?  Do certain amplifiers need special attention when connecting the radio to them?

73

Mark
KK2L

 


Re: Raspberry Pi 4 setup

Dennis
 

Bump


PTT CABLE

Mark Gottlieb <kk2l@...>
 

Happy New Year Everyone,

What would be the suggested cable for the PTT - OUT to use for an amplifier.  I know it requires a 3.5" stereo cable but are there any resistors/diodes have to be placed in line with that cable?  Do certain amplifiers need special attention when connecting the radio to them?

73

Mark
KK2L


Possible to tell year of manufacture from serial number?

KF4VAR
 

Is it possible to tell the year of manufacture from the serial number?
Thanks
Regards & 73
Carr KF4VAR


Re: HAM RADIO DELUXE PTT

Mark Gottlieb <kk2l@...>
 

Alain,

 

This Saturday morning, my time, I will not be available.  We can look at the next week if you like.  I am in no urgent hurry and appreciate your offer of assistance.

 

73

 

Mark

KK2L

 

antenna sunset

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Tuesday, January 7, 2020 3:42 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

OK, sure. As I am working for a living, Saturday would be just fine. I will see my son and my grand daughters on Sunday. Could be 9 or 10 AM your side ( 3 or 4 PM in Paris ) as you prefer.

73, Alain
F4HFS

Le 07/01/2020 à 21:24, Mark Gottlieb a écrit :

Alain,

 

I like the TeamViewer idea.  We have a 6 hour time difference so I imagine a weekend day would be most convenient for you.  Let me know.  Merci Beaucoup!

 

73

 

Mark

KK2L

 

antenna sunset

 

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Tuesday, January 7, 2020 3:18 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Mark,

Your 2 macros run just fine on my DM780. I do not see anything wrong. I attached the shots where you can see how I've set them up.

Did you do anything different ?

The only other way I see to help you is you give me a remote access to your computer (using team viewer) and I would compare your settings with mine. Or you could call the HRD help.

Have you another idea ?

Alain F4HFS


Le 07/01/2020 à 03:47, Mark Gottlieb a écrit :

No luck, yet, but I think I am getting closer.  Here are two of my macros.  Neither one will go into TX when I click Send.  Do you see something wrong in the way they are written?

 

#++

#

#   End of a reply to the other station, his callsign

#   is taken from the Add Log Entry Callsign field.

#

#--

#

<his:callsign> <his:callsign> de <my:callsign> <my:callsign> I am reading you 599 599.  The name, here, is Mark.  How Copy?  BTU <his:callsign> de <my:callsign>  pse kn <stop>

 

 

 

 

#++

#

#   QRZ, stops TX when all text sent.

#

#--

#TX 0    //  TX = Off

QRZ QRZ QRZ de <my:callsign> <my:callsign> <my:callsign> pse k <stop>

 

 

 

 

 

 

73

 

Mark

KK2L

 

antenna sunset

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 4:10 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Sorry Mark, I did not help.

other thoughts on the macro side. please check in the macro window  :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ? (checkbox)
- Do you have a mode enabled in the "Enable By Mode" window ?
I use the macro by first displaying the text in the TX window for possible edition, and then I send the text using the send button (DM780).

Do you have another TRx which HRD/DM780 would properly work with ?
 
What is your version of HRD + DM780 ?

73,
Alain F4HFS

Le 06/01/2020 à 21:28, Mark Gottlieb a écrit :

Hello Alain,

 

I have HRD already configured as you describe here.  The TX button, in the radio section, in DM780 will key up the radio if I manually apply it.  My problem is that when I am attempting to send a macro the radio will not go in TX.  I have attempted to set up with both HRD and Mini-Deluxe 2.1, which takes less processing, and I have achieved the same results in that the radio will not go into TX unless I manually apply the button.    I am getting the exact same results with the ELAD and with my FLEX 6400.  BTW, I have been using HRD since 2014.   Thank-you for offering your assistance.

 

73

 

Mark

KK2L

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 3:14 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD program options

4) DM780 program options

DM780 program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780 TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS




Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :

Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L






-- 
Alain Reiner





-- 
Alain Reiner




-- 
Alain Reiner



-- 
Alain Reiner


Re: HAM RADIO DELUXE PTT

Alain Reiner <alain@...>
 

OK, sure. As I am working for a living, Saturday would be just fine. I will see my son and my grand daughters on Sunday. Could be 9 or 10 AM your side ( 3 or 4 PM in Paris ) as you prefer.

73, Alain
F4HFS

Le 07/01/2020 à 21:24, Mark Gottlieb a écrit :

Alain,

 

I like the TeamViewer idea.  We have a 6 hour time difference so I imagine a weekend day would be most convenient for you.  Let me know.  Merci Beaucoup!

 

73

 

Mark

KK2L

 

antenna sunset

 

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Tuesday, January 7, 2020 3:18 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Mark,

Your 2 macros run just fine on my DM780. I do not see anything wrong. I attached the shots where you can see how I've set them up.

Did you do anything different ?

The only other way I see to help you is you give me a remote access to your computer (using team viewer) and I would compare your settings with mine. Or you could call the HRD help.

Have you another idea ?

Alain F4HFS

Le 07/01/2020 à 03:47, Mark Gottlieb a écrit :

No luck, yet, but I think I am getting closer.  Here are two of my macros.  Neither one will go into TX when I click Send.  Do you see something wrong in the way they are written?

 

#++

#

#   End of a reply to the other station, his callsign

#   is taken from the Add Log Entry Callsign field.

#

#--

#

<his:callsign> <his:callsign> de <my:callsign> <my:callsign> I am reading you 599 599.  The name, here, is Mark.  How Copy?  BTU <his:callsign> de <my:callsign>  pse kn <stop>

 

 

 

 

#++

#

#   QRZ, stops TX when all text sent.

#

#--

#TX 0    //  TX = Off

QRZ QRZ QRZ de <my:callsign> <my:callsign> <my:callsign> pse k <stop>

 

 

 

 

 

 

73

 

Mark

KK2L

 

antenna sunset

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 4:10 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Sorry Mark, I did not help.

other thoughts on the macro side. please check in the macro window  :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ? (checkbox)
- Do you have a mode enabled in the "Enable By Mode" window ?
I use the macro by first displaying the text in the TX window for possible edition, and then I send the text using the send button (DM780).

Do you have another TRx which HRD/DM780 would properly work with ?
 
What is your version of HRD + DM780 ?

73,
Alain F4HFS

Le 06/01/2020 à 21:28, Mark Gottlieb a écrit :

Hello Alain,

 

I have HRD already configured as you describe here.  The TX button, in the radio section, in DM780 will key up the radio if I manually apply it.  My problem is that when I am attempting to send a macro the radio will not go in TX.  I have attempted to set up with both HRD and Mini-Deluxe 2.1, which takes less processing, and I have achieved the same results in that the radio will not go into TX unless I manually apply the button.    I am getting the exact same results with the ELAD and with my FLEX 6400.  BTW, I have been using HRD since 2014.   Thank-you for offering your assistance.

 

73

 

Mark

KK2L

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 3:14 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD program options

4) DM780 program options

DM780 program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780 TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS



Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :

Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L





-- 
Alain Reiner




-- 
Alain Reiner



-- 
Alain Reiner

-- 
Alain Reiner


Re: HAM RADIO DELUXE PTT

Mark Gottlieb <kk2l@...>
 

Alain,

 

I like the TeamViewer idea.  We have a 6 hour time difference so I imagine a weekend day would be most convenient for you.  Let me know.  Merci Beaucoup!

 

73

 

Mark

KK2L

 

antenna sunset

 

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Tuesday, January 7, 2020 3:18 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Mark,

Your 2 macros run just fine on my DM780. I do not see anything wrong. I attached the shots where you can see how I've set them up.

Did you do anything different ?

The only other way I see to help you is you give me a remote access to your computer (using team viewer) and I would compare your settings with mine. Or you could call the HRD help.

Have you another idea ?

Alain F4HFS

Le 07/01/2020 à 03:47, Mark Gottlieb a écrit :

No luck, yet, but I think I am getting closer.  Here are two of my macros.  Neither one will go into TX when I click Send.  Do you see something wrong in the way they are written?

 

#++

#

#   End of a reply to the other station, his callsign

#   is taken from the Add Log Entry Callsign field.

#

#--

#

<his:callsign> <his:callsign> de <my:callsign> <my:callsign> I am reading you 599 599.  The name, here, is Mark.  How Copy?  BTU <his:callsign> de <my:callsign>  pse kn <stop>

 

 

 

 

#++

#

#   QRZ, stops TX when all text sent.

#

#--

#TX 0    //  TX = Off

QRZ QRZ QRZ de <my:callsign> <my:callsign> <my:callsign> pse k <stop>

 

 

 

 

 

 

73

 

Mark

KK2L

 

antenna sunset

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 4:10 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Sorry Mark, I did not help.

other thoughts on the macro side. please check in the macro window  :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ? (checkbox)
- Do you have a mode enabled in the "Enable By Mode" window ?
I use the macro by first displaying the text in the TX window for possible edition, and then I send the text using the send button (DM780).

Do you have another TRx which HRD/DM780 would properly work with ?
 
What is your version of HRD + DM780 ?

73,
Alain F4HFS

Le 06/01/2020 à 21:28, Mark Gottlieb a écrit :

Hello Alain,

 

I have HRD already configured as you describe here.  The TX button, in the radio section, in DM780 will key up the radio if I manually apply it.  My problem is that when I am attempting to send a macro the radio will not go in TX.  I have attempted to set up with both HRD and Mini-Deluxe 2.1, which takes less processing, and I have achieved the same results in that the radio will not go into TX unless I manually apply the button.    I am getting the exact same results with the ELAD and with my FLEX 6400.  BTW, I have been using HRD since 2014.   Thank-you for offering your assistance.

 

73

 

Mark

KK2L

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 3:14 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD
                connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD
                program options

4) DM780 program options

DM780 program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780 TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS



Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :

Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L





-- 
Alain Reiner




-- 
Alain Reiner



-- 
Alain Reiner


Re: HAM RADIO DELUXE PTT

Alain Reiner <alain@...>
 

Mark,

Your 2 macros run just fine on my DM780. I do not see anything wrong. I attached the shots where you can see how I've set them up.

Did you do anything different ?

The only other way I see to help you is you give me a remote access to your computer (using team viewer) and I would compare your settings with mine. Or you could call the HRD help.

Have you another idea ?

Alain F4HFS


Le 07/01/2020 à 03:47, Mark Gottlieb a écrit :

No luck, yet, but I think I am getting closer.  Here are two of my macros.  Neither one will go into TX when I click Send.  Do you see something wrong in the way they are written?

 

#++

#

#   End of a reply to the other station, his callsign

#   is taken from the Add Log Entry Callsign field.

#

#--

#

<his:callsign> <his:callsign> de <my:callsign> <my:callsign> I am reading you 599 599.  The name, here, is Mark.  How Copy?  BTU <his:callsign> de <my:callsign>  pse kn <stop>

 

 

 

 

#++

#

#   QRZ, stops TX when all text sent.

#

#--

#TX 0    //  TX = Off

QRZ QRZ QRZ de <my:callsign> <my:callsign> <my:callsign> pse k <stop>

 

 

 

 

 

 

73

 

Mark

KK2L

 

antenna sunset

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 4:10 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Sorry Mark, I did not help.

other thoughts on the macro side. please check in the macro window  :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ? (checkbox)
- Do you have a mode enabled in the "Enable By Mode" window ?
I use the macro by first displaying the text in the TX window for possible edition, and then I send the text using the send button (DM780).

Do you have another TRx which HRD/DM780 would properly work with ?
 
What is your version of HRD + DM780 ?

73,
Alain F4HFS

Le 06/01/2020 à 21:28, Mark Gottlieb a écrit :

Hello Alain,

 

I have HRD already configured as you describe here.  The TX button, in the radio section, in DM780 will key up the radio if I manually apply it.  My problem is that when I am attempting to send a macro the radio will not go in TX.  I have attempted to set up with both HRD and Mini-Deluxe 2.1, which takes less processing, and I have achieved the same results in that the radio will not go into TX unless I manually apply the button.    I am getting the exact same results with the ELAD and with my FLEX 6400.  BTW, I have been using HRD since 2014.   Thank-you for offering your assistance.

 

73

 

Mark

KK2L

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 3:14 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD
                connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD
                program options

4) DM780 program options

DM780 program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780 TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS


Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :

Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L




-- 
Alain Reiner



-- 
Alain Reiner

-- 
Alain Reiner


Re: s2 "High Sensitivity Mode"? #fdm-s2

Vianney Colombat
 


Yes, it's just switching out the attenuator.

Il 30/12/2019 21:06, Jeff Patterson via Groups.Io ha scritto:
The S2 spec sheet mentions a "high sensitivity mode" in the footnotes but I can find no other mention of this in either the user manual or the SW2 manual. Is HS mode just switching out the 12 dB attenuator or something else?

Thanks,
Jeff NG6X
_._,_._,_




Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Re: HAM RADIO DELUXE PTT

Mark Gottlieb <kk2l@...>
 

No luck, yet, but I think I am getting closer.  Here are two of my macros.  Neither one will go into TX when I click Send.  Do you see something wrong in the way they are written?

 

#++

#

#   End of a reply to the other station, his callsign

#   is taken from the Add Log Entry Callsign field.

#

#--

#

<his:callsign> <his:callsign> de <my:callsign> <my:callsign> I am reading you 599 599.  The name, here, is Mark.  How Copy?  BTU <his:callsign> de <my:callsign>  pse kn <stop>

 

 

 

 

#++

#

#   QRZ, stops TX when all text sent.

#

#--

#TX 0    //  TX = Off

QRZ QRZ QRZ de <my:callsign> <my:callsign> <my:callsign> pse k <stop>

 

 

 

 

 

 

73

 

Mark

KK2L

 

antenna sunset

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 4:10 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Sorry Mark, I did not help.

other thoughts on the macro side. please check in the macro window  :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ? (checkbox)
- Do you have a mode enabled in the "Enable By Mode" window ?
I use the macro by first displaying the text in the TX window for possible edition, and then I send the text using the send button (DM780).

Do you have another TRx which HRD/DM780 would properly work with ?
 
What is your version of HRD + DM780 ?

73,
Alain F4HFS

Le 06/01/2020 à 21:28, Mark Gottlieb a écrit :

Hello Alain,

 

I have HRD already configured as you describe here.  The TX button, in the radio section, in DM780 will key up the radio if I manually apply it.  My problem is that when I am attempting to send a macro the radio will not go in TX.  I have attempted to set up with both HRD and Mini-Deluxe 2.1, which takes less processing, and I have achieved the same results in that the radio will not go into TX unless I manually apply the button.    I am getting the exact same results with the ELAD and with my FLEX 6400.  BTW, I have been using HRD since 2014.   Thank-you for offering your assistance.

 

73

 

Mark

KK2L

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 3:14 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD
              connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD
              program options

4) DM780 program options

DM780
              program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780
              TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS


Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :

Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L




-- 
Alain Reiner



-- 
Alain Reiner


Re: HAM RADIO DELUXE PTT

Mark Gottlieb <kk2l@...>
 

Thank you for these ideas.  I haven’t checked on them.  The fact that I’m experiencing the same problems with two different radios indicates that I have overlooked something really simple.  I know for sure that I have not checked off the mode enabling as you suggest for the macros.  I will let you know soon.

73

Mark
KK2L

73

Mark
KK2L




On Mon, Jan 6, 2020 at 4:10 PM -0500, "Alain Reiner" <alain@...> wrote:

Sorry Mark, I did not help.

other thoughts on the macro side. please check in the macro window  :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ? (checkbox)
- Do you have a mode enabled in the "Enable By Mode" window ?
I use the macro by first displaying the text in the TX window for possible edition, and then I send the text using the send button (DM780).

Do you have another TRx which HRD/DM780 would properly work with ?
 
What is your version of HRD + DM780 ?

73,
Alain F4HFS

Le 06/01/2020 à 21:28, Mark Gottlieb a écrit :

Hello Alain,

 

I have HRD already configured as you describe here.  The TX button, in the radio section, in DM780 will key up the radio if I manually apply it.  My problem is that when I am attempting to send a macro the radio will not go in TX.  I have attempted to set up with both HRD and Mini-Deluxe 2.1, which takes less processing, and I have achieved the same results in that the radio will not go into TX unless I manually apply the button.    I am getting the exact same results with the ELAD and with my FLEX 6400.  BTW, I have been using HRD since 2014.   Thank-you for offering your assistance.

 

73

 

Mark

KK2L

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 3:14 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD
              connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD
              program options

4) DM780 program options

DM780
              program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780
              TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS

Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :

Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L



-- 
Alain Reiner

-- 
Alain Reiner


Re: HAM RADIO DELUXE PTT

Alain Reiner <alain@...>
 

Sorry Mark, I did not help.

other thoughts on the macro side. please check in the macro window  :
- Are the macros enabled ? (checkbox at the top left)
- Do you need the text to be sent immediately ? (checkbox)
- Do you have a mode enabled in the "Enable By Mode" window ?
I use the macro by first displaying the text in the TX window for possible edition, and then I send the text using the send button (DM780).

Do you have another TRx which HRD/DM780 would properly work with ?
 
What is your version of HRD + DM780 ?

73,
Alain F4HFS

Le 06/01/2020 à 21:28, Mark Gottlieb a écrit :

Hello Alain,

 

I have HRD already configured as you describe here.  The TX button, in the radio section, in DM780 will key up the radio if I manually apply it.  My problem is that when I am attempting to send a macro the radio will not go in TX.  I have attempted to set up with both HRD and Mini-Deluxe 2.1, which takes less processing, and I have achieved the same results in that the radio will not go into TX unless I manually apply the button.    I am getting the exact same results with the ELAD and with my FLEX 6400.  BTW, I have been using HRD since 2014.   Thank-you for offering your assistance.

 

73

 

Mark

KK2L

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 3:14 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD
              connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD
              program options

4) DM780 program options

DM780
              program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780
              TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS

Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :

Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L



-- 
Alain Reiner

-- 
Alain Reiner


Re: HAM RADIO DELUXE PTT

Mark Gottlieb <kk2l@...>
 

Hello Alain,

 

I have HRD already configured as you describe here.  The TX button, in the radio section, in DM780 will key up the radio if I manually apply it.  My problem is that when I am attempting to send a macro the radio will not go in TX.  I have attempted to set up with both HRD and Mini-Deluxe 2.1, which takes less processing, and I have achieved the same results in that the radio will not go into TX unless I manually apply the button.    I am getting the exact same results with the ELAD and with my FLEX 6400.  BTW, I have been using HRD since 2014.   Thank-you for offering your assistance.

 

73

 

Mark

KK2L

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Alain Reiner
Sent: Monday, January 6, 2020 3:14 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] HAM RADIO DELUXE PTT

 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD program options

4) DM780 program options

DM780 program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780 TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS

Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :

Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L



-- 
Alain Reiner


Re: HAM RADIO DELUXE PTT

Alain Reiner <alain@...>
 

Hello Mark, all,

Let's begin by the obvious. I'm using only the CAT command for PTT.

1) DUO
- the PTT setup : I've set it at IN + RTS because I use the RTS with wsjtx for the FT8. So for my using DM780, IN alone is enough.
- CAT BitRate : 9600 b/s, so I can use my DUO with MMSSTV. You may put whatever bitrate you want, but you have to set the HRD connection accordingly, of course. Sorry for the (very) obvious.

2) the CAT connection with HRD

HRD connection

NB : As DM780 needs the logbook to properly work, I don't launch automatically DM780 at HRD startup. The logbook is quite long to launch. HRD Rig control launches first, then the log book. Once the logbook is opened and stable, I launch DM780 from the logbook window.

3) HRD Program options

HRD program options

4) DM780 program options

DM780 program options

NB : take care to connect DM780 to HRD. You must do it at least once. Then it is kept up.

All that is quite obvious. I don't expect you missed any of them. The real trick is the next one. I bet you missed this one :-).

5) DM780 (hidden) TX button

to show the tx button (green ellipse), you have to click on the "Radio" button (red circle). This is only for using it manually. With the DUO turned on, HRD connected, DM780 connected to HRD, try and click on the TX button. If the DUO don't transmit, that's it !

To program the TX button, you have to click on the configuration button (blue circle). Then you click on TX in the new "Configure Radio Pane" and you may chose the action associated with the TX button. Personally, I've trivially chosen the TX button to turn the DUO in transmission (TX). I know, it's very common... I like it this way. Please, don't ask me why they've done that, ok ?

The real trick is that there is no default programming in this button. When you install a new TRX connection, DM780 will prompt you for programming the TX button, only once. If you missed it the first time, there won't be a second time.

DM780 TX Button


Let me know your results. If none of this worked, we would see what to do next.

73,
Alain F4HFS


Le 05/01/2020 à 22:18, Mark Gottlieb a écrit :
Hello Alain,

I am still having the same issue.  It is exactly the same for my FLEX 6400 and my ELAD FM DUO so it must be something simple that I am not doing to enable PTT using these radios.  I am able to manually click on TX, in the radio section of HRD, and both radios will go into TX mode.  In addition, I have full audio capability in terms of decoding and I do have rig control, for both radios, where I can switch bands, increase volume, etc. from HRD.

Please advise.

73

Mark
KK2L

-- 
Alain Reiner


Re: Raspberry Pi 4 setup

Mark Gottlieb <kk2l@...>
 

Happy New Year All,

Yes, I would be looking for this information as well.  Laptops, of course, run out of power in less than 2 hours.  I would also be interested in knowing if anyone is using DRAWS pi hat with the ELAD in the field.


73

Mark 
KK2L


Raspberry Pi 4 setup

Dennis
 

Greetings,

I would like to interface my DUO with a raspberry Pi 4 using Flrig for rig control. My primary interest is to run wsjtx-x and Fldigi in the field with either a small display or perhaps a tablet (running headless).

I would appreciate learning the setup from someone who has the DUO running wsjtx-x/Flrig on a Pi.

Kind Regards,
73, Dennis W7DRW

3881 - 3900 of 20294