Date   

Re: WSJT-X Fox/Hound

Neil Smith G4DBN
 

Should work perfectly well Jim, the program just sends the usual F 14xxxxxx Hamlib call when it goes to transmit in Fake It mode, then another one when it goes back to receive.  That will set your TX frequency correctly to where the program wants you to transmit.  Fake It just tells the radio to move to another frequency, whereas Rig tries to set the VFO A and B and flip between them.  Modern SDRs can flip frequency very rapidly so there is no need to use old-style split.

Hope it works for you and you make it with the T31!

Neil G4DBN

On 20/02/2019 22:18, Jim Fuller wrote:
The reason I asked was that I got a response from T31EU while he was in F/H mode this morning but could not complete the QSO. If you start up F/H mode with none selected for split you get an error message saying you should have Rig or Fake It selected.. I'll go ahead and use Fake It for normal WSJT-X and see how it goes.


Re: WSJT-X Fox/Hound

Jim Fuller
 

The reason I asked was that I got a response from T31EU while he was in F/H mode this morning but could not complete the QSO. If you start up F/H mode with none selected for split you get an error message saying you should have Rig or Fake It selected.. I'll go ahead and use Fake It for normal WSJT-X and see how it goes.

Thanks
Jim-KC4JNW


Re: "GO" button greyed out - USB connection issue?

Allen
 

Hi Paul, I don't have another PC running windows to check if FDM-S2 I will run on it, but I am pretty certain my current computer is OK as I can run several other devices via USB connections with no issues. I am in Virginia, USA.

Hi Vianney, yes the Auto-start demodulation button is checked.


Re: WSJT-X Fox/Hound

Neil Smith G4DBN
 

Hi Jim, I haven't seen any of the discussions about F/H, but I can confirm that "Fake It" works fine with the new FDM-DUO Hamlib in WSJT-X when running split for low transmit tones in FT8.  That worked fine in the old TS480 though.  However, I can now run CAT PTT without hitting the lock-up race condition that used to afflict the TS-480 driver.

I think there is no reason to use Rig, as the DUO is perfectly happy to flip frequency on the main VFO using Fake-It.  Maybe some old rigs work better using "real" split?

I guess you need a friend to set up a fake dxpedition mode station to try out the facility!

I must see if any of my other Hamlib-enabled programs now have the DUO as an option for radio type.

Sorry I totally forgot who did the Hamlib coding for the DUO, but it looks like it is working.  Brilliant.

Neil G4DBN

On 20/02/2019 14:27, Jim Fuller wrote:
I have read many of the previous threads about not being able to work in F/H mode with the TS480 selected as the radio in WSJT-X.

Now since the DUO is a individual selection on the radio tab of WSJT-X should we be able to work F/H mode and if so should "Rig" or "Fake It" be selected?


WSJT-X Fox/Hound

Jim Fuller
 

I have read many of the previous threads about not being able to work in F/H mode with the TS480 selected as the radio in WSJT-X.

Now since the DUO is a individual selection on the radio tab of WSJT-X should we be able to work F/H mode and if so should "Rig" or "Fake It" be selected?

Jim - KC4JNW


Re: "GO" button greyed out - USB connection issue?

Vianney Colombat
 


Allen,

check also the "Auto-start demodulation" setting, maybe it is unchecked.




Il 20/02/2019 02:55, Paul Jones ha scritto:

Allen,

 

Have you tried a different PC just in case it’s the USB controller on the PC, if not where are you located so we can check it out?

 

Have a Radiolutionary Day!
Paul

--

Paul Jones - Elad USA Sales & Technical Support (USA)
emailsigfile
FDM-Duo, Duo-Art, FDM-DUOR,  FDM-S3, FDM-S2, FDM-S2, FDM-SW2, T-Mate

Visit http://www.eladit.com for the full range of Elad Products or USA Sales : https://shop.elad-usa.com/

Email Support Group - https://groups.io/g/EladSDR

Sales Phone: 312.320.8160

Support Email: support@... Sales Email: sales@...
Personal Email: Paul@...
 
 

 

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Allen
Sent: Monday, February 18, 2019 19:27
To: EladSDR@groups.io
Subject: [EladSDR] "GO" button greyed out - USB connection issue?

 

A few weeks ago, I started FDM-SW2 program to run my FDM-S2 but "Go" button is grayed out. I have always had issues with poor USB connection on back of the unit but usually re-positioning the cable would re-establish connection, but not now. I have tried different cables, different USB ports on computer, even installing older SW versions but always get grayed "Go" button. Software seems to run fine in offline mode. I suspect the problem might be the internal connection of the USB port to pc board inside the FDM-S2 but I'm not about to attempt repair myself!

Any ideas/suggestions?
Thanks,
Allen



Mail priva di virus. www.avg.com

Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Re: "GO" button greyed out - USB connection issue?

Paul Jones
 

Allen,

 

Have you tried a different PC just in case it’s the USB controller on the PC, if not where are you located so we can check it out?

 

Have a Radiolutionary Day!
Paul

--

Paul Jones - Elad USA Sales & Technical Support (USA)
emailsigfile
FDM-Duo, Duo-Art, FDM-DUOR,  FDM-S3, FDM-S2, FDM-S2, FDM-SW2, T-Mate

Visit http://www.eladit.com for the full range of Elad Products or USA Sales : https://shop.elad-usa.com/

Email Support Group - https://groups.io/g/EladSDR

Sales Phone: 312.320.8160

Support Email: support@... Sales Email: sales@...
Personal Email: Paul@...
 
 

 

 

From: EladSDR@groups.io <EladSDR@groups.io> On Behalf Of Allen
Sent: Monday, February 18, 2019 19:27
To: EladSDR@groups.io
Subject: [EladSDR] "GO" button greyed out - USB connection issue?

 

A few weeks ago, I started FDM-SW2 program to run my FDM-S2 but "Go" button is grayed out. I have always had issues with poor USB connection on back of the unit but usually re-positioning the cable would re-establish connection, but not now. I have tried different cables, different USB ports on computer, even installing older SW versions but always get grayed "Go" button. Software seems to run fine in offline mode. I suspect the problem might be the internal connection of the USB port to pc board inside the FDM-S2 but I'm not about to attempt repair myself!

Any ideas/suggestions?
Thanks,
Allen


"GO" button greyed out - USB connection issue?

Allen
 

A few weeks ago, I started FDM-SW2 program to run my FDM-S2 but "Go" button is grayed out. I have always had issues with poor USB connection on back of the unit but usually re-positioning the cable would re-establish connection, but not now. I have tried different cables, different USB ports on computer, even installing older SW versions but always get grayed "Go" button. Software seems to run fine in offline mode. I suspect the problem might be the internal connection of the USB port to pc board inside the FDM-S2 but I'm not about to attempt repair myself!

Any ideas/suggestions?
Thanks,
Allen


SW2 Set-up Issues

Jim Fuller
 

Hardware - FDM DUO and ART.
Software - Windows 10, SW2 ver 3.019

I believe I have some sort of setup issue between the DUO and SW2 that I haven't been able to figure out. 

From SW2 main screen I can change the frequency  of the DUO but little else. On the right side of the main screen if I change operating mode, such as LSB to USB,  the display on the waterfall reacts appropriately but the mode on the DUO does not actually change. Similar with AGC and bandwidth.. If I change bands from the right side of the main screen the DUO does change to the new band. The indicated mode also changes on SW2 if I am going from 40 to 20 but not on the DUO. If I change volume on the right side for receiver 1 then the volume on my PC speakers changes.

Meanwhile on the DUO FDM Stand Alone panel (part of SW2)
- I can change the operating mode of the DUO using the macro buttons.
- I can change the AGC of the DUO using the selector
- I can change the volume of the DUO using the slider.

Before getting the ART I really did not use SW2 but was only using the DUO for digital with WSJT-X.  (Which still works either with or without SW2 running.)

Any help or ideas to fix would be appreciated.

Thank you.
Jim - KC4JNW


Re: The new RadioFrequency_S smaller program dedicated to the Elad S1, S2, DUO with special Features

 

Standard Edition x Framework 4+

Now the RadioFrequency_S program x FrameWork 3.5 (Win 7) is ready x download.

Raimund
.


Re: FDM DUO

JMT
 

Bonjour  Vianney
Je viens d’exécuter la procédure que vous m’avez envoyé par mail
Tout est rentré dans l’ordre
Il me reste maintenant à faire la mise a jour de mon”DUO ART 120
et j’espère que tout ira bien .
Un grand merci pour vos conseils et la rapidité de votre réponse
 
Cordiales 73 Jean Marie F6FUZ
 
 

From: Vianney Colombat
Sent: Saturday, February 16, 2019 7:34 PM
To: EladSDR@groups.io
Subject: Re: [EladSDR] FDM DUO
 
 
Bonsoir Jean-Marie,
 
vous devez activer manuellement le mode de reprogrammation en utilisant le bouton fait exprés. Je colle ci dessous un extrait du mode d'emploi de la MAJ firmware.
 
 
Aprés avoir fait cette opération, vous pouvez procéder à la reprogrammation en utilisant le logiciel Flash Magic, même si l'écran reste éteint.
 
Cordialement,
 
Vianney
 
 
 
From: "JMT" <f6fuz@...>
To: EladSDR@groups.io
Date: Sat, 16 Feb 2019 07:14:29 -0800
Subject: [EladSDR] FDM DUO

BONJOUR
LORS DE LA MISE A JOUR DE MON FDM DUO  RUBRIQUE USER INTERFACE J AI EU UN PROBLEME  REFUS DE MISE A JOUR
DEPUIS LORSQUE J ALLUME MON TX J AI UN ECRAN NOIR ET PLUS DE COMMUNICATION
EXISTE T IL UNE SOLUTION POUR LE REMETTRE EN FONCTIONNEMENT
CORDIALES 73   JEAN MARIE
HELLO
When updating my FDM DUO topic "USER INTERFACE" had a problème refused to update ; since when turn on my TX have black sreen and no communication
Is there a solution to put it back in operation
Translation  google   (HI)

Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Re: FDM DUO

Vianney Colombat
 

 
Bonsoir Jean-Marie,
 
vous devez activer manuellement le mode de reprogrammation en utilisant le bouton fait exprés. Je colle ci dessous un extrait du mode d'emploi de la MAJ firmware.
 
 
Aprés avoir fait cette opération, vous pouvez procéder à la reprogrammation en utilisant le logiciel Flash Magic, même si l'écran reste éteint.
 
Cordialement,
 
Vianney
 
 
 
 
From: "JMT" <f6fuz@...>
To: EladSDR@groups.io
Date: Sat, 16 Feb 2019 07:14:29 -0800
Subject: [EladSDR] FDM DUO

BONJOUR 
LORS DE LA MISE A JOUR DE MON FDM DUO  RUBRIQUE USER INTERFACE J AI EU UN PROBLEME  REFUS DE MISE A JOUR
DEPUIS LORSQUE J ALLUME MON TX J AI UN ECRAN NOIR ET PLUS DE COMMUNICATION
EXISTE T IL UNE SOLUTION POUR LE REMETTRE EN FONCTIONNEMENT
CORDIALES 73   JEAN MARIE
HELLO
When updating my FDM DUO topic "USER INTERFACE" had a problème refused to update ; since when turn on my TX have black sreen and no communication 
Is there a solution to put it back in operation
Translation  google   (HI)

Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


FDM DUO

JMT
 

BONJOUR 
LORS DE LA MISE A JOUR DE MON FDM DUO  RUBRIQUE USER INTERFACE J AI EU UN PROBLEME  REFUS DE MISE A JOUR
DEPUIS LORSQUE J ALLUME MON TX J AI UN ECRAN NOIR ET PLUS DE COMMUNICATION
EXISTE T IL UNE SOLUTION POUR LE REMETTRE EN FONCTIONNEMENT
CORDIALES 73   JEAN MARIE
HELLO
When updating my FDM DUO topic "USER INTERFACE" had a problème refused to update ; since when turn on my TX have black sreen and no communication 
Is there a solution to put it back in operation
Translation  google   (HI)


FDM-Duo for sale - SK sale

Frank-G3YQA
 

I am handling the disposal of a friends (SK) radio equipment and one of the items is a black FDM-Duo I have the original box and the three A-B USB leads he used, I cannot find the original micro USB to female USB firmware updating lead but I have bought a replacement as well as a 8gb  micro USB+USB pen drive. These should arrive shortly. The condition of the duo is first class and I have checked it out on a dummy load sand it works fine.
Is anyone on the group interested before I put it on e-bay?.
I am hoping to get about £500 for it, All moneys going to cancer research.
Happy for any test at this qth.

All replies off reflector please.

Regards
Frank G3YQA


Re: VS: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software

Vianney Colombat
 

 
Otso,
 
you're right, when running more than one instance under the same user account, only the settings related to the FDM devices (the xml files with the serial number) are managed separately.
 
Vianney
 
From: Otso Ylönen <otso.ylonen@...>
To: "EladSDR@groups.io" <EladSDR@groups.io>
Date: Sat, 16 Feb 2019 12:28:31 +0100
Subject: VS: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software
 
This brings to my mind a wild idea which would allow “syncing” of IQ files made with different receivers at the same time, for example with antennas pointing to different directions. When playing back, one could then jump between the recordings with buttons on SW2…
 
BR, Otso
 
P.S. I will have to try if running instances of SW2 under one account behaves better now with new versions. Previously, it was not possible to have them remember all settings correctly.
Lähettäjä: g0ofe
Lähetetty: lauantai 16. helmikuuta 2019 11.24
Vastaanottaja: EladSDR@groups.io
Aihe: Re: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software
 
 
Further to this... SDR Console will also allow you, subject to hardware/ resources, to run multiple SDRs, including multiple Elads, at the same time.
I have two S2s which run together fine.
 
Jim.
 
On 16/02/2019 09:39, Vianney Colombat wrote:
 
You can use more than one FDM devices with the same user account without problem, using the same (and the only one) installation of the FDM-SW2 software.
 
I regularly run two FDM-DUOs, two FDM-S2 and one FDM-S1 on the same computer, at the same time, on the same Windows user account, with the single one installation of the FDM-SW2 software. I need 5 usb connection obviously.
 
Vianney
 
 
 
From: Otso Ylönen <otso.ylonen@...>
To: "EladSDR@groups.io" <EladSDR@groups.io>
Date: Sat, 16 Feb 2019 09:39:01 +0100
Subject: VS: [EladSDR] Using SDR-Console & FD
 
 
 
Yes, you can run these parallel. I have three FDM-2:s and run the under Windows 10 side-by-side, covering a good part of the FM broadcast band.
 
I actually run them from one single directory/folder but start them via “Run As” under different user accounts.
 
BR, Otso
 
Lähettäjä: John Palmer via Groups.Io
Lähetetty: perjantai 15. helmikuuta 2019 16.16
Vastaanottaja: EladSDR@groups.io
Aihe: [EladSDR] Using SDR-Console & FDM-SW2 Software
 
Having found that the FDM-DUOr is a very good RX i have now purchased the  FDM-SW2 RX as well. I have found that you can run both receivers side by side. To my amazement both work in tandem. Just thought that various people might find this useful.
Also you can run both RX’s with the same software, the only thing you have to do is make sure both pieces of software are in different folders on your windows drive, I have one in the route directory and the other in program files. This is possible if you have a very fast spec computer because the cpu usage is very high. I use a IMac Pro 8th generation I7 with 16gb of memory and it works fine for me.
I for one is now thinking of buying the tx + Duo Art amp.
Many thanks for the updates that are making the radio’s the cutting-edge of the new breed of radio’s
 
John
M0LCD
 
 
 
 

Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.
 
 
Virus-free. www.avast.com
 
 

Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


VS: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software

Otso Ylönen
 

This brings to my mind a wild idea which would allow “syncing” of IQ files made with different receivers at the same time, for example with antennas pointing to different directions. When playing back, one could then jump between the recordings with buttons on SW2…

 

BR, Otso

 

P.S. I will have to try if running instances of SW2 under one account behaves better now with new versions. Previously, it was not possible to have them remember all settings correctly.

Lähettäjä: g0ofe
Lähetetty: lauantai 16. helmikuuta 2019 11.24
Vastaanottaja: EladSDR@groups.io
Aihe: Re: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software

 

Further to this... SDR Console will also allow you, subject to hardware/ resources, to run multiple SDRs, including multiple Elads, at the same time.

I have two S2s which run together fine.

 

Jim.

 

On 16/02/2019 09:39, Vianney Colombat wrote:

 

You can use more than one FDM devices with the same user account without problem, using the same (and the only one) installation of the FDM-SW2 software.

 

I regularly run two FDM-DUOs, two FDM-S2 and one FDM-S1 on the same computer, at the same time, on the same Windows user account, with the single one installation of the FDM-SW2 software. I need 5 usb connection obviously.

 

Vianney

 

 

 

From: Otso Ylönen <otso.ylonen@...>
To: "EladSDR@groups.io" <EladSDR@groups.io>
Date: Sat, 16 Feb 2019 09:39:01 +0100
Subject: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software
 

Yes, you can run these parallel. I have three FDM-2:s and run the under Windows 10 side-by-side, covering a good part of the FM broadcast band.

 

I actually run them from one single directory/folder but start them via “Run As” under different user accounts.

 

BR, Otso

 

Lähettäjä: John Palmer via Groups.Io
Lähetetty: perjantai 15. helmikuuta 2019 16.16
Vastaanottaja: EladSDR@groups.io
Aihe: [EladSDR] Using SDR-Console & FDM-SW2 Software

 

Having found that the FDM-DUOr is a very good RX i have now purchased the  FDM-SW2 RX as well. I have found that you can run both receivers side by side. To my amazement both work in tandem. Just thought that various people might find this useful.

Also you can run both RX’s with the same software, the only thing you have to do is make sure both pieces of software are in different folders on your windows drive, I have one in the route directory and the other in program files. This is possible if you have a very fast spec computer because the cpu usage is very high. I use a IMac Pro 8th generation I7 with 16gb of memory and it works fine for me.

I for one is now thinking of buying the tx + Duo Art amp.

Many thanks for the updates that are making the radio’s the cutting-edge of the new breed of radio’s

 

John

M0LCD

 

 

 

 


Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.

 

 

Virus-free. www.avast.com

 


Re: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software

g0ofe
 

Further to this... SDR Console will also allow you, subject to hardware/ resources, to run multiple SDRs, including multiple Elads, at the same time.

I have two S2s which run together fine.


Jim.


On 16/02/2019 09:39, Vianney Colombat wrote:
 
You can use more than one FDM devices with the same user account without problem, using the same (and the only one) installation of the FDM-SW2 software.
 
I regularly run two FDM-DUOs, two FDM-S2 and one FDM-S1 on the same computer, at the same time, on the same Windows user account, with the single one installation of the FDM-SW2 software. I need 5 usb connection obviously.
 
Vianney
 
 
 
From: Otso Ylönen <otso.ylonen@...>
To: "EladSDR@groups.io" <EladSDR@groups.io>
Date: Sat, 16 Feb 2019 09:39:01 +0100
Subject: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software
 
Yes, you can run these parallel. I have three FDM-2:s and run the under Windows 10 side-by-side, covering a good part of the FM broadcast band.
 
I actually run them from one single directory/folder but start them via “Run As” under different user accounts.
 
BR, Otso
 
Lähettäjä: John Palmer via Groups.Io
Lähetetty: perjantai 15. helmikuuta 2019 16.16
Vastaanottaja: EladSDR@groups.io
Aihe: [EladSDR] Using SDR-Console & FDM-SW2 Software
 
Having found that the FDM-DUOr is a very good RX i have now purchased the  FDM-SW2 RX as well. I have found that you can run both receivers side by side. To my amazement both work in tandem. Just thought that various people might find this useful.
Also you can run both RX’s with the same software, the only thing you have to do is make sure both pieces of software are in different folders on your windows drive, I have one in the route directory and the other in program files. This is possible if you have a very fast spec computer because the cpu usage is very high. I use a IMac Pro 8th generation I7 with 16gb of memory and it works fine for me.
I for one is now thinking of buying the tx + Duo Art amp.
Many thanks for the updates that are making the radio’s the cutting-edge of the new breed of radio’s
 
John
M0LCD
 
 
 
 

Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Virus-free. www.avast.com


Re: Updates.

Vianney Colombat
 

Jan,
 
check the new menu 59, set it to "returns previous mode after transmission".
 
Vianney
 
 
From: "jan jellema via Groups.Io" <emuprof@...>
To: EladSDR@groups.io
Date: Fri, 15 Feb 2019 13:28:30 -0800
Subject: Re: [EladSDR] Updates.

Hi Vianney

Just updated  with TX 01.35 and now no longer can send CW in SSB mode  = shows "wrong mode" on the Fdm-Duo display
also did the UI 04.87 right after the  TX update  ~ and the Duo-ART  to 01.34 too

System appears to function properly otherwise

Regards, Jan K1ND

Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


Re: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software

Vianney Colombat
 

 
You can use more than one FDM devices with the same user account without problem, using the same (and the only one) installation of the FDM-SW2 software.
 
I regularly run two FDM-DUOs, two FDM-S2 and one FDM-S1 on the same computer, at the same time, on the same Windows user account, with the single one installation of the FDM-SW2 software. I need 5 usb connection obviously.
 
Vianney
 
 
 
From: Otso Ylönen <otso.ylonen@...>
To: "EladSDR@groups.io" <EladSDR@groups.io>
Date: Sat, 16 Feb 2019 09:39:01 +0100
Subject: VS: [EladSDR] Using SDR-Console & FDM-SW2 Software
 
Yes, you can run these parallel. I have three FDM-2:s and run the under Windows 10 side-by-side, covering a good part of the FM broadcast band.
 
I actually run them from one single directory/folder but start them via “Run As” under different user accounts.
 
BR, Otso
 
Lähettäjä: John Palmer via Groups.Io
Lähetetty: perjantai 15. helmikuuta 2019 16.16
Vastaanottaja: EladSDR@groups.io
Aihe: [EladSDR] Using SDR-Console & FDM-SW2 Software
 
Having found that the FDM-DUOr is a very good RX i have now purchased the  FDM-SW2 RX as well. I have found that you can run both receivers side by side. To my amazement both work in tandem. Just thought that various people might find this useful.
Also you can run both RX’s with the same software, the only thing you have to do is make sure both pieces of software are in different folders on your windows drive, I have one in the route directory and the other in program files. This is possible if you have a very fast spec computer because the cpu usage is very high. I use a IMac Pro 8th generation I7 with 16gb of memory and it works fine for me.
I for one is now thinking of buying the tx + Duo Art amp.
Many thanks for the updates that are making the radio’s the cutting-edge of the new breed of radio’s
 
John
M0LCD
 
 
 
 

Le informazioni contenute in questo messaggio di posta elettronica sono riservate e confidenziali e ne è vietata la diffusione in qualunque modo eseguita (DL 196/2003). Qualora Lei non fosse la persona a cui il presente messaggio è destinato, La invitiamo ad eliminarlo e a non leggerlo, dandone gentilmente comunicazione al mittente.

The information contained in this e-mail and any attachments is confidential and may well also be legally privileged (DL 196/2003). If you are not among the named recipients, please notify the sender immediately by reply e-mail and then delete this message from your system, do not use the contents for any purpose whatsoever nor disclose them to anyone else.


VS: [EladSDR] Using SDR-Console & FDM-SW2 Software

Otso Ylönen
 

Yes, you can run these parallel. I have three FDM-2:s and run the under Windows 10 side-by-side, covering a good part of the FM broadcast band.

 

I actually run them from one single directory/folder but start them via “Run As” under different user accounts.

 

BR, Otso

 

Lähettäjä: John Palmer via Groups.Io
Lähetetty: perjantai 15. helmikuuta 2019 16.16
Vastaanottaja: EladSDR@groups.io
Aihe: [EladSDR] Using SDR-Console & FDM-SW2 Software

 

Having found that the FDM-DUOr is a very good RX i have now purchased the  FDM-SW2 RX as well. I have found that you can run both receivers side by side. To my amazement both work in tandem. Just thought that various people might find this useful.

Also you can run both RX’s with the same software, the only thing you have to do is make sure both pieces of software are in different folders on your windows drive, I have one in the route directory and the other in program files. This is possible if you have a very fast spec computer because the cpu usage is very high. I use a IMac Pro 8th generation I7 with 16gb of memory and it works fine for me.

I for one is now thinking of buying the tx + Duo Art amp.

Many thanks for the updates that are making the radio’s the cutting-edge of the new breed of radio’s

 

John

M0LCD

 

 

 

6081 - 6100 of 20548