Date   

Re: Back to vers. 1.150.

e u
 

Thanks, I'll check mine and will do the same if I see the same anomalies.


Back to vers. 1.150.

A.
 

Hi

I'm back to the 1,150. 

Notch OFF or ABS, REL missing. 

The Notch Bandwidth on the screen disappeared. 

Activating Omnirig locks the Lock To CF.


Regards


Antonio - ea7hj


Re: Part Three: Advanced SW2

Bill Ellis
 

Yes thank you Dave, your videos are extremely informative and well produced. In fact they are so well produced it makes me wonder if video editing and narration is your profession. In any case when I purchased my transiever I referred Elad to your videos and they were impressed as well. You should be on their payroll you have done them such a service.

Bill


Re: Elad fdm-sw2 1.158 beta

e u
 

Thank you again Otso.

I was able to install it last night. I can see no difference so far.


Re: Part Three: Advanced SW2

mathews ember
 

Thank you for this excellent explanation of Elad Duo


Re: USB lead

Mike Fallon
 

Many thanks Chris

Regards,


Mike


On 03/05/2017 08:04, Chris Mackerell chris@... [elad_sdr_en] wrote:
 

I use 1.8m Belkin Pro Series leads on my S2 & Duo without any problems:

https://www.ascent.co.nz/productspecification.aspx?itemID=103009

Cheers, Chris

On 2017-05-03 19:51, Mike Fallon mike@... [elad_sdr_en] wrote:
> Hi,
>
> Can anyone recommend a suitable longer (maybe 2m length) USB lead for my
> FDM-S2 please? The supplied lead is too short for my needs.
>
>
> Thanks
>
>
> Mike
>
>



Re: USB lead

Chris Mackerell
 

I use 1.8m Belkin Pro Series leads on my S2 & Duo without any problems:

https://www.ascent.co.nz/productspecification.aspx?itemID=103009

Cheers, Chris

On 2017-05-03 19:51, Mike Fallon mike@ukdx.org.uk [elad_sdr_en] wrote:
Hi,
Can anyone recommend a suitable longer (maybe 2m length) USB lead for my FDM-S2 please? The supplied lead is too short for my needs.
Thanks
Mike


USB lead

Mike Fallon
 

Hi,

Can anyone recommend a suitable longer (maybe 2m length) USB lead for my FDM-S2 please? The supplied lead is too short for my needs.


Thanks


Mike


Re: Elad fdm-sw2 1.158 beta

Otso Ylönen
 

Hi,
I think I never installed (or at least used) 1.150. Since the last version I was really using last year, there is the Profile Dialogue now. It is kind of useful, running several copies of SW2 with different settings. However, to be more conveinient, profiles should be loadable right in the startup (via command line).
 
Other than that, I think the stability of SW2 has improved: I have done quite a bit of listening to old RF files and the version I had before this, was prone to crashing when jumping quickly back and forth (in time) within the recording.
 
BR, Otso
 
Gesendet: Mittwoch, 03. Mai 2017 um 03:52 Uhr
Von: "elad_user@... [elad_sdr_en]"
An: elad_sdr_en@...
Betreff: Re: [elad_sdr_en] Elad fdm-sw2 1.158 beta
 

Thank you

Do you see any difference from 1.150?


Duo and WAN remote

Reginald J Mackey SR <k6xr@...>
 

Its anyone running the DUO remote via the WAN? Will it do that?

Thanks!


Reggie k6xr
Ham Radio Since 1955
DXCC RCC WAZ
QRP is King


Re: Elad fdm-sw2 1.158 beta

e u
 

Thank you


Re: Elad fdm-sw2 1.158 beta

e u
 

Thank you

Do you see any difference from 1.150?


DUO display shows SP when using SW2 with only RX1

v_oleon8@...
 

Hi all,


My Duo displays SP (split ?) when I am using SW2 with only one vrx (RX1) activated.

Is this normal?


I can reset the DUO to default and the SP goes away but when I transmit in SW2 it reappears.


If I disconnect all three USB cables and run the radio stand-alone, no problems.


Can someone shed some light on this.


Tnx  . . . Dave  N3DZ



Re: Elad fdm-sw2 1.158 beta

Otso Ylönen
 

Hi,
Yes, works normally for me. I made a fresh install on a new Windows 7 machine.
 
BR, Otso
 
Gesendet: Dienstag, 02. Mai 2017 um 02:33 Uhr
Von: "elad_user@... [elad_sdr_en]"
An: elad_sdr_en@...
Betreff: [elad_sdr_en] Elad fdm-sw2 1.158 beta
 

Has anyone been able to get this working with a fdm-s2?

Thanks


Re: Elad fdm-sw2 1.158 beta

Henry
 

Yes, it is running here with the S2. I simply overinstalled it on version 1.150. But I did not see changes against 1.150 as it seems to contain only adaptations for the S3.

73, Henry


Re: Any suggestions to tackle overload/QRM issues

Chris Moore
 

Thanks Dave,

The loop I am using has an amp at the base of the loop and another in the inside interface box that provides the bias-t voltage.  

Any thoughts on the best location for such a filter - at the input of the Duo, or possibly between the loop and the loop interface amp?  I believe it's the Duo overloading rather than the loop amps as I can get a clean signal with attenuation after the loop amps.

Sent from my iPhone

On Apr 30, 2017, at 5:49 PM, w8kfj@... [elad_sdr_en] <elad_sdr_en@...> wrote:


Elad fdm-sw2 1.158 beta

e u
 

Has anyone been able to get this working with a fdm-s2?

Thanks


Re: Elad Ticket System

Bob Barnum <rwb1636@...>
 

Just used ticket system which worked fine. why don't you try again.
Bob KC9RF

On Mon, May 1, 2017 at 12:26 AM, Maurizio - IK1NAF m.picerni@... [elad_sdr_en] <elad_sdr_en@...> wrote:
 

Really done 2-3 ticket some months ago and had no reply.
If you phone it's possibile that someone helps you .
I never try TV remote session.
bye
IK1NAF



Re: FDM-DUO error msg "wrong mod"

v_oleon8@...
 

It is fine now.
Operator error !
In the dim light, I was pressing the wrong button.
Sorry for the bandwidth.

Dave


FDM-DUO error msg "wrong mod"

v_oleon8@...
 

Hello,


A long press of S3 used to enter the Tuning Mode.

Now I get "WRONG MOD" in the display.

I did a reset but it did not resolve this.


Please help.


Dave Dzelsky  N3DZ

8501 - 8520 of 20026