Re: CAT protocol problem with fdm-sw2
|
Richard Langley
When I wrote a Python script to automatically log the S-meter values on a particular frequency at specified time intervals, I found that I had to first send a command to set the LO frequency and then a second command to set the tune frequency. I also had
to be careful about the decimal frequency conversion to a string of hex byte values (to which the CAT command was appended) and then into a byte string and then into a byte array, which was sent out the virtual serial port. Might be an easier way to do it
but that approach worked for me. -- Richard Langley
-----------------------------------------------------------------------------
| Richard B. Langley E-mail: lang@... |
| Geodetic Research Laboratory Web: http://gge.unb.ca | | Dept. of Geodesy and Geomatics Engineering Phone: +1 506 453-5142 |
| University of New Brunswick Fax: +1 506 453-4943 | | Fredericton, N.B., Canada E3B 5A3 | | Fredericton? Where's that? See: http://www.fredericton.ca/ | -----------------------------------------------------------------------------
From: elad_sdr_en@... on behalf of smile_k@... [elad_sdr_en]
Sent: Wednesday, August 26, 2015 4:49 PM To: elad_sdr_en@... Subject: Re[2]: [elad_sdr_en] CAT protocol problem with fdm-sw2 Yes, i've read it.... But i always get weird freqs.
--
|
|
|